AQUACENTRUM / Product related FAQs about water filters and water ionizers

Product related FAQs about water filters and water ionizers

FAQ's | Product related | Water filter | Water treatment | Water ionizer

The following questions and answers below were mainly compiled by Yasin Akgün and are regularly expanded. These FAQ's and some more on the subject of water and water treatment are in ours large FAQ database pictured.

The The current PDF version of the FAQ database is available for download here free of charge.
Further down on the page you will also find a 30-minute video about the typical FAQs that we receive again and again.

You can submit a new question on this website. Please search our complete FAQ database beforehand:

> Product-related questions and answers (water filters, water ionizers, glass bottles)

> Typical questions and answers (also via email)

> Product-related questions and answers (water filters, water ionizers, glass bottles)

Hallo,

I've been looking for a reverse osmosis water filter for a long time.

Unfortunately, there are many manufacturers with different technologies. As a result, I created a small list of questions. I would be very grateful if you could answer this with confidence!

Is tap water molecularly filtered using reverse osmosis?

Who is the manufacturer of the membrane?

Does the device comply with DIN 1988 T 2?
Is the entire production monitored by TÜV (important due to the risk of water damage)?

Does the manufacturer offer a “lifetime” guarantee (30 years) as well as a 10-year exchange guarantee (e.g. for further developments)?

Does the system have product liability insurance for water damage?

Have all plastic parts and the removal tap been tested by the Federal Institute for Materials Research and Testing (BAM)?

Is there a BAM certificate that the plastic material used is free of plasticizers?

Is there a BEWAG test report for the system?

Is there a germ-free certificate for the system?

Is there a test report on the surface tension of the water for the system?

Are check valves installed in the various systems?

Is the sampling tap made of clinical stainless steel?

Is there a test report on the shock resistance of the system that it can withstand 120.000 pressure shocks of 15 bar?

Are the parts assembled without toxic solvents?

Is the system equipped with a water stopper with an electronically controlled shut-off valve?

Is the system equipped with John Guest connectors?

Is the activated carbon in the pre-filter made from highly absorbent coconut shell?

Are the sediment pre-filters wound (no foam block filtration on the surface only)?

Is the cluster structure of the water also optimized after purification?

Is the system manufactured in Germany?

Can you take a look at the factory where the systems are produced?

Are there official testimonials for the systems?

How long has the manufacturer been on the market?

Is the system protected against viruses and bacteria?

Can you change the filter yourself without additional manual costs?

Is the cluster structure of the water optimized after purification, and by what process?

It should be noted that there are a lot of unscrupulous suppliers of water filters and reverse osmosis systems on the market who put their customers at risk of serious poisoning and even endangering their lives by selling products that have not been tested for phenols, plasticizers and heavy metals hand over!

It is therefore very important that reverse osmosis and water filter systems are thoroughly tested by state authorities. You should not rely on mere advertising claims from providers, but also request the relevant evidence and certificates.

You can now see that I have been dealing with the topic of water treatment systems for a very long time!

Unfortunately, I also had to pay a lot of tuition fees, both in terms of my health and finances!

So I hope for your understanding and for your questions to be answered. Kind regards

Andreas S.

Answer from Yasin Akgün to the many questions about our best reverse osmosis system

Hello Mr. S.,
So those are too many questions, and most of them can be answered with no
This is all standard, FDA tested, world market, large quantities, in other words, other “manufacturers” or rather sellers have misled you and scared you about everything
The Osminion Direct Flow is from the largest manufacturer in the world, half of the systems online come from them, only ours also has an internal after-filter, and if desired an external mineralization filter with H2 gas infusion:
www.aquacentrum.de/produkt/osminion-direct-flow-600gpd-umkehrosmose-anlage-mit-reminerisierung-ph-wert-anzieh-h2/
www.aquacentrum.de/produkt/nachmineralisation-kartusche-minerade-h2-shuttle-ph-wasserstoff/

This is a filter that will certainly not introduce poisons into the water, and all osmosis systems are like this, with the same standard hoses etc.

In terms of health, you can't have paid the price for a water filter, because health lies somewhere completely different:
www.aquacentrum.de/videosammlung-neue-germanische-heilkunde-neue-germanische-medizin/
Listen to the first video
If you find just one hypothesis on the site, you will receive a 50% discount on the Osminion Direct Flow. If you don't find one, you have a very, very exciting new hobby for life.

Included water stopper is mechanical:
www.aquacentrum.de/shop/leckage-stop-mechanisch-leak-stop/

Yes, I have product liability insurance

Nothing is made in Germany, everything is made in China, even if other manufacturers claim so, they only made the housing in Germany...

You can never guarantee freedom from germs, I can't see everything in your kitchen, but I can send you a sterile filter: www.aquacentrum.de/produkt/mini-inline-sterilfilter-mit-1-4-stutzen-ultrafiltration-filterfeinheit-002- µm bacteria filter

You have a free trial period and satisfaction guarantee and 4 year warranty:
www.aquacentrum.de/satisfactionguarantee/
Even after the warranty, everything can be repaired

The tap is made of stainless steel, others don't have that, whether clinical or not, since you let the water drain first, it doesn't matter.

Yes, you can easily replace the filters yourself.

The tee is John Guest: www.aquacentrum.de/produkt/t-stueck-john-guest-winkel-absperrventil-38-x-14-mit-rueckfluss-verhinderer-din-norm/
The rest isn't, but everything is now standard and very, very reliable

Surface tension is a different area, I will measure all the water with a tensor this year, it goes in the direction of:
Hexagonal water is elusive, feel free to take a look here:
www.aquacentrum.de/faqs/hexagonal-structure-water-messbar-microscopic-belegbar/

Below on the top page are the studies on hexagonal water, but they are all rather unimportant compared to these studies on hydrogen:
www.molecularhydrogeninstitute.com/studies
And an even bigger one: https://e-miz.co.jp/english/file/documents3.1_en_black.pdf
And an older one:
http://aquavolta.de/euromultimedia/pdf/studies/Nicolson_H2_Review%202016.pdf

I've been in the industry for over 16 years and I get emails like the ones you send me, so you can trust me. There is no danger from the systems, except that if you leave them for a long time, strange bacteria that smell like rotten eggs could develop, in the past when people didn't work with silver activated carbon and antifouling membranes, but today everything is standard, so no worries..

Hope this helps you
I look forward to your answer

Sincerely,
Yours, Yasin Akgün

  • Giovanni Dreier says:
    Your comment is waiting for moderation. This is a preview, your comment will be visible after it's approved.
    Thanks for the info
  • Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Mr. Asenbaum How do you rate reverse osmosis systems from Hpreiss and Truu Water?

    Dear Mr. Asenbaum,

    I have been dealing with the topic of water for a long time out of personal interest.

    This email is simply to thank you for all your actions, your commitment, sharing your interview, preparing the topic, for example in the form of short videos, so that I can understand everything too.
    Thank you from the bottom of my heart for that.

    Now I'm not a professional like you, I just know that there are various cleaning systems out there, of which if you want to spend some money, the reverse osmosis process with subsequent swirling/activation if necessary is a good choice. That's the technology. There are many providers, some of which are probably very similar, but others offer rather inferior products.

    I find enrichment with hydrogen very exciting and have been able to learn a lot about it through your videos, among other things.
    I would be pleased if you could tell me - more as a water expert than as a representative of a specific brand - how you rate the products from hpreiss and truu water, although in my opinion truu does not currently offer a variant with hydrogen enrichment.

    (Oh...since you don't really live around the corner, I was hoping to be a little closer to the lots of interesting information you keep sharing by connecting via your Facebook page. So I had one for you Short message sent via Facebook/messenger. But I think you spread the information about water through other channels. Therefore the connection request may not seem appropriate.)

    Thank you very much for your help and your time.
    Sunny greetings from Düsseldorf
    Ulrike K.

    Dear Ms. K.,

    Thank you very much for your great praise and your questions. I recommend that you work through my link list in advance, as I can only go into it very briefly here. https://aquavolta.eu/wp-content/uploads/2021/06/Linkliste-Asenbaum-aktuell.pdf

    Reverse osmosis is the most complex filter process and removes both pollutants and useful dissolved substances such as minerals from the water. It only makes sense if the water contains pollutants that cannot be removed by the first 3 stages of a reverse osmosis system (sediment/activated carbon/ceramic filter). In Germany this is necessary in around 10% of cases. The osmosis membrane as the 4th filter stage then creates almost pure water, which does not meet any standard for drinking water because it has the property of filling up with anions and cations like a sponge and thereby demineralizing the body. As a result, people start eating more than is required in terms of calories to compensate for the missing minerals from water intake. Drinkers of pure osmosis water are therefore usually overweight. In my opinion, the fact that in areas where the natural water is almost as soft as osmosis water, more coronary diseases occur, especially in men, is not a direct effect of the water, but rather the urge for over-calorie nutrition that arises there.

    I therefore strongly advise against long-term drinking of reverse osmosis water that has not been re-mineralized.
    By activation I only mean the activation measured electrically in millivolts by dissolved hydrogen gas, which leads to a very low redox potential. Turbulence, on the other hand, has the exact opposite effect because it creates oxygen. i.e. high redox potential introduced into the water.
    The two never fit together.

    Hydrogen-rich water occurs naturally in a few healing springs, but is extremely rare and the hydrogen content is practically impossible to bottle, as hydrogen-rich water is very sensitive due to rapid degassing into the atmosphere. Therefore, over the last 17 years, while I have been working on this topic full-time, processes for increased enrichment and preservation of hydrogen water have been invented. Why hydrogen-rich water is the most interesting variant of drinking water treatment (besides filtering) can be found in detail in my book “Electroactivated Water – from healing water from the socket to hydrogen therapy” mentioned in the links.

    I have been involved in some new techniques for production and preservation in the form of the “Aquavolta” brand I developed, which is sold worldwide through licensing partners such as www.aquacentrum.de. Please forgive me if I generally give cautious assessments of other brands or distribution systems. The colleagues in question certainly put a lot of effort into their products. However, I am usually one of the first to find out about new technologies, and in fact we always develop a new Aquavolta product as soon as a sensible technological leap in water treatment becomes apparent. However, the two systems you asked about, hpreiss and truu, are actually neither new nor interesting to me.
    hpreiss has 2 hydrogen devices on its website: The Hydron, a Koranic device with which I was able to measure a hydrogen concentration of 1300 ppb maximum. Today's systems achieve significantly more than 2000 ppm. As well as the Hydrogen Mini, which I haven't been able to test myself yet. However, hpreiss states the following: “Concentration of dissolved hydrogen ions: 700 – 1100 ppb”. From today's perspective, this is downright ridiculous for a hydrogen booster. Apart from the fact that the company apparently has no idea about the technical terminology: Because “hydrogen ions” are H+ ions. Chemically, they have about as much to do with hydrogen gas as the name “Gustav” has to do with the word “inn”.

    The scope of truu products is not described in more detail on the website. It seems to be pure filters. In any case, it is a multivel marketing structure sales, which explains the prices of over €3000. I think these prices are misleading customers. As with the structural distribution of the Kangen devices, which are also far overpriced, there are indications of a connection with Scientology organizations. https://www.swr.de/swraktuell/baden-wuerttemberg/karlsruhe/truu-wasserfilter-scientology-100.html

    Kind regards /with kind regards
    Karl Heinz Asenbaum

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Question about measuring method for HHO Aquacure inhalations hydrogen water

    Hello Mister. asen tree,

    The YouTube lectures are very informative, thank you very much for that. I built a device similar to the Aquacure for my own use because I developed rheumatoid arthritis and the pain wouldn't go away. I'm now in the 5th week of drinking the bubble water and breathing and it has actually brought about significant improvement. It is as if the levels of the disease develop backwards away from the bones (deepest level). I got severe hay fever again like I had before, then it went away, then itchy skin again for a few days and now it's all over and it's just getting a little better day by day. I had put a lot of strain on my body with extreme sports for decades and had probably generated a lot of ROS. I actually just wanted to install a hydrogen cell in my car again and then somehow came across the health sector through H2 or HHO.

    So far I haven't found anywhere how you can really measure the saturation of the water, the 1,6 mg/l that is in the room for full saturation?

    Tell me how you do that?

    As further effects, I can also notice a significant increase in performance when doing sports. It's like the cells have more steam without everything having to come from breathing. I'm still a bit unsure about the cell, which runs on 80g NAOH as electrolyte, but I have 2 bubblers connected upstream with bubble stones and change the distillation there. Water if it has TDS > 70. The third bubbler is my drinking cup and then I inhale.

    Which of your books would you recommend to me to better understand the technology and chemical processes?

    I am an electrical engineer and worked for 20 years in MUC at BMW in the research center before I emigrated to Andalusia in Golden-Handshake.

    Best regards

    Dieter Baumgartner

    Hello Mr. Baumgartner,

    Thank you very much for your praise. I recommend my link list for more information - https://aquacentrum.de/linkliste

    I have not yet published anything on HHO because, in contrast to H2, there is hardly any scientific literature about it and because my own measurements with the Aquacure and similar devices did not produce any results that make this technology particularly important. In particular, it is very, very difficult and time-consuming to produce well-saturated or even supersaturated hydrogen water by blowing HHO into water. 

    Your question about a measurement method is therefore very justified, but it will hardly get you any further, because the proponents of HHO such as Wiseman, Sircus and Jansen claim - without any evidence - that the H2 blue drops or MIZ Reagent or Jeudao H2 Measuring drops would not correctly display the hydrogen in HHO bubbled water. In any case, with HHO bubbling you will never achieve full saturation, even after several hours. The values ​​after 30 minutes are below the minimum therapeutic level of 0,5 ppm.

    However, such water still makes sense, since normal water does not contain any molecular hydrogen. So it can also work, but this has not yet been proven, in contrast to pure H2 water with full saturation (1,6 ppm) or more (up to 10 ppm), about which there are currently over 1000 publications. Nevertheless, your personal experiences show that an effect is at least noticeable.

    Overall, HHO gas seems to me to be more suitable for inhalation. However, there is only evidence for pure H2/O2 mixtures. The HHO produced from a lye, for example from Aquacure, is not pure, but contains a number of unclear other components that can most likely be eliminated through the double filtering you mentioned and the associated cooling of the vapor mixture. Pure H2/O2 mixtures are generated by PEM cells and are currently used primarily in lung diseases such as COVID 19 with evident initial success. The presence of oxygen, the opposite gas to hydrogen, is not harmful because there is an oxygen exchange deficit in the inflamed lung. The hydrogen prevents the progression of the inflammation, which is promoted by increased oxygen.

    If the oxygen requirement is not increased, I would always prefer pure H2 gas, as even a small increase in the oxygen content can cause many health problems. You have to imagine that people at 0 m above sea level have 21% oxygen in the air, while here in Munich at 530 m above sea level I have to make do with significantly less. Reinhold Messner even climbed Mt. Everest without an oxygen mask. Too little oxygen is rarely a problem. On the other hand, increased oxygen pressure, for example for divers below sea level, is an increased health risk. Deep divers get by with 4% oxygen and 96% hydrogen (Hydreliox). Oxygen promotes inflammation and is a dangerous gas that is used in very small doses and only briefly, even by medical professionals who work with hyperbaric oxygen.

    The beginning of hydrogen therapy at the end of the 18th century, on the other hand, relied on reducing oxygen and increasing hydrogen as therapy. And I don't see anything in the medical literature today that points in a different direction.

    If you want to measure the H2 concentration of your Recure replica, you can easily do so with the titration drops based on methylene blue, such as these, which are the easiest to use: https://www.aquacentrum.de/produkt/jeudao-wasserstoff-testfluessigkeit-durch-titrationsmethode/ But as I said: HHO water doesn't achieve any really interesting values. These would be over 1,6 ppm. Oxygen and hydrogen are gases that have opposite effects (oxidative-antioxidant). For saturated or highly saturated water you have to eliminate the dissolved oxygen. Otherwise there will be little therapeutic success. The reason why even HHO or H2/O2 water still has an effect is that one hydrogen molecule is always produced per water molecule, but only half an oxygen molecule. That's why the redox potential still remains nice and negative.

    By the way, we also have a former BMW employee here who recently received the golden handshake in our Aquacentrum engineering office. He now assembles products that produce far more powerful hydrogen water than anything else on the market. Feel free to read more about it here. Ceramics have now conquered electrical engineering, just as a geothermal heat pump can replace nuclear power. 🙂  https://1drv.ms/b/s!AmaqoADEboWRiOJ3Ejd-qP7-9U2QSg?e=phDHkL

    Greetings to Andalusia, where I want to travel again as soon as possible after receiving the second Covid vaccination at the end of June.

    Kind regards /with kind regards

    Karl Heinz Asenbaum

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    FAQ about the performance (pH value and H2 content) of the Bionlite / Yishan Titanion water ionizer

    Hello Mr. Asenbaum,
    please pay attention to this message only on Monday. I don't want to bother you on the weekend! But it's a good time for me to write a few lines...
    I received the package from the Aquacentrum and have already diligently tested my Titanion Ultra SE using pH and H2 drops. The result is not so good:

    With a flow rate of 1,1 liters per minute, I get a blue color in the test glass for the first time at level 4 (“pH 10”). Underneath I get various shades of green. Even one drop of H2 caused the water to color, meaning the H2 content is minimal.

    Further information:
    I descaled the ionizer three days ago, the filter is about 3 months old. And this is the input water: www.wvv-rotenburg-land.de/sites/default/files/Wasserwerte/wwsued.pdf

    Is it possible that the device is permanently calcified, as you once described in an older video? If so, the question arises as to what my replacement should look like. Can the newer devices still calcify like this? Basically, the H2 yield of the boosters seems to be significantly better, so I'm now leaning towards a simple under-sink filter (+booster) again... Thank you again for your brief assessment.

    Kind regards, Oliver A.

    Wuendisch Yunsun Titanion SSP cell

    Bionlite or Yishan Titanion water ionizer

    Hello Mr. A.,

    Of course I also read on the weekends, otherwise I can't keep up.

    Even with 58 mg/l calcium, you have to check the performance of your device at least every 4 months after the descaling is due. If it should actually deliver pH 10 and only delivers pH 8, the hydrogen concentration is of course also below the measurability limit of the H2 blue drops. Clearly there hasn't been enough decalcification here for a long time. The membrane may even be damaged by the limescale layer on the electrodes.

    I would give the device another chance and descale it thoroughly. We recommend heating Heitmann biodescaler to 50 degrees and reheating it every hour. After the third hour, replace it completely and use a new descaler. Then let the pump run again for at least 3 hours.

    This works 60:50. If it still doesn't work (your water would have to reach more than pH 4 at level 1,2 with 10 liters of flow), the cell needs to be replaced due to membrane damage. Costs 300 - 400 €, as the installation is relatively time-consuming and the cell costs 200 + tax.

    In principle, any ionizer can become calcified. Even a €3000 coffee machine will break after 3 years at the latest if you don't carry out the descaling procedure regularly. Even if you buy a new water ionizer, you are not exempt from descaling. Also Hydrogen booster must be descaled regularly.

    Calcium is a blessing for nerves and bones, but unfortunately it is annoying in electrical water devices. We can't change that. If you want to avoid descaling, these are the only options left Hydronade hydrogen tablets.

    With kind regards

    Karl Heinz Asenbaum

    Tel. +49 152 345 567 94

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Why are fewer and fewer hydrogen bubbles (H2) formed during production?

    Hello Mr. Asenbaum,

    I notice that my H2 Booster initially produces a lot of H2 bubbles in the first few minutes and then after about 5 minutes there are a lot fewer bubbles.

    I usually choose 2 or 3 times 5min production time.

    Is this normal, is it perhaps related to the back pressure that is building up?

    The hydrogen actually has to go somewhere, it seems that over time a lot less H2 is produced and the bubbles get bigger and bigger.

    Regards
    Nicolai F.

    AquaVolta hydrogen booster HRW base device pressure vessel side-ac

    Answer from Karl Heinz Asenbaum hydrogen booster | Blistering

    Hello Mr. F.,

    the dynamics of bubble formation is a science in itself. Basically, you should know that the device always produces the same amount of hydrogen unless the battery has a voltage drop. First, nanobubbles appear on the upper electrode, but they cannot be seen. This then becomes microbubbles that are visible but still dissolve in the water.

    The larger bubbles do not dissolve in the water at all, so they are, so to speak, lost hydrogen. A maximum of 1 mg/l hydrogen can be dissolved under 1,6 atm pressure. If after 5 minutes approx. 0,5 mg/l are dissolved, the water becomes “tighter”.

    However, if the lost hydrogen forms a H2 gas bubble that is as pure as possible above the water, then more hydrogen can be dissolved in the water according to Henry's law. Hydrogen, the smallest of all water gases, displaces all other gases.

    So what you see in the first few minutes is not necessarily just hydrogen, but also, for example, outgassing oxygen, nitrogen and carbon dioxide. That's why there are usually more bubbles at the beginning.

    The solution of the hydrogen is accelerated by degassing the water beforehand. The easiest way to do this is in a bottle using a vacuum pump, such as the one you use to seal opened wine bottles. Pull 5 to 6 times and shake the bottle to cause the water to visibly outgas. Then the hydrogen can dissolve more quickly because it doesn't have to push out the other gases. The advantage of previously degassed water is that an almost pure hydrogen gas then builds up in the gas pressure bubble, so that more hydrogen can be absorbed into the water according to Henry's law.

    This roughly explains the different bubble sizes. There is no specialist book about it yet. The whole matter is still very young and the people who know about it can be counted on 10 fingers worldwide.

    Link to FAQ post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Does a stainless steel bottle make supposedly healthy water unhealthy?

    Good afternoon, Mr. Asenbaum.
    For a few weeks I have been concerned with the quality of the water, what I have drunk so far 😳 - and what I intend to drink in the future: "ionized water" - produced by a table-top device. I recently got to know the water ionizer from “Enagic”: All in all, paying around €4.500 for the total sales package (which includes around 50% sales commission!!!) is “bag-making”.
    [I now know that everyone who deals with the topic of “clean, alkaline water” cannot ignore you and your expertise.] May I ask you a question – if you would charge me a moderate fee , please let me know.
    My question is: since I want to discipline myself to drink about 2,5 liters of qualified water every day, which I also want to have with me in a portable way, I have come to the conclusion that I should... Buy a single-walled stainless steel drinking bottle from “Klean Kanteen”. Now I read that this stainless steel and thus also the ionized water would become electromagnetically (“negatively”) charged - and thus the supposedly healthy water would become unhealthy.
    What's it all about?

    I would be happy to hear from you. to receive an answer.
    Best regards, Joachim W.

    600mL Stainless Steel Thermos Bottle Double Wall 1200

    Answer from Karl Heinz Asenbaum about stainless steel bottles

    Dear Mr. W.,

    Thank you for your inquiry. Even for more difficult questions about activated water, I have not yet charged users any fees…

    You can find basic answers in detail in my book below, which I make available for download free of charge.

    http://www.aquavolta.de/euromultimedia/pdf/EAWdeutsch06.pdf

    First of all, a counter question: Why do you want to drink 2,5 liters of qualified water every day? The total water requirement of a human being is approximately 0,3 L/10 kg including the water in food and drinks other than water. Do you weigh more than 100 kg? Then we can talk about it. I weigh 76 kg and get by on 1,5 liters of active water every day. Because I also drink other drinks, eat fruit and vegetables... 1,5 L is also the amount that Dr. Irlacher has administered to thousands of his patients.

    All I can say about the Klean Kanteen bottles is that I think they are a bit overpriced for a high-quality stainless steel bottle, especially since they only have one wall and don't keep the water cool for that long. There are better and cheaper things on the market. But I'm not making any recommendations and this bottle is certainly much better for active water than a plastic bottle and looks very pretty too.

    I don't know where you read that this “stainless steel and thus also the ionized water would become electromagnetically negatively charged”. Please tell me the source, because this is grotesque nonsense and I would like to comment directly on it.

    The general situation is this: Except when running an air ionizer or after a thunderstorm or at a waterfall, the air around the bottle is usually positively charged.

    Hydrogen-rich water in the bottle is negatively charged. If the bottle only has a single metal wall, the charges can influence each other relatively easily depending on the current strength. Double-walled vacuum stainless steel bottles better protect the water from loss of charge.

    Your question also implies that negatively charged water would be “unhealthy.” I don't know from which esoteric corner you got this information. It's just nonsense. Because the opposite is true. Negative charge means electron abundance. That's why staying at a waterfall is healthier than in a road tunnel, where there is an extreme lack of electrons in the form of positively charged pollutant ions.

    Now I would like to tell you the following: What we can measure in activated water with voltages of -0,1 to -0,8 volts as ORP (oxidation reduction potential) is the result of a redox reaction between a relatively strongly positively charged Electrode, which is between 4,5 and 9 volts for a silver electrode, and the measured water. What constitutes the ORP of water is mainly due to the presence of molecular hydrogen in the water, which is created during electrolytic water activation in the cathode chamber. Molecular hydrogen, H2, apparently only reacts when the positive counter voltage is more than approx. 2 volts, for example in our body to hydroxyl radicals with a voltage of + 2,3 volts. At voltages of this level, the hydrogen releases electrons to the measuring electrode, which then shows a negative voltage. These tension conditions are therefore the conditions for the possibility of a loss of tension within the bottle. However, it is completely unlikely that positive voltages of this magnitude would accumulate on the outer wall of a stainless steel bottle. It is therefore possible to store hydrogen-rich water with little loss in a bulging stainless steel bottle for several weeks. This certainly also applies to your pretty expensive Klean Kanteen fakes. You really don't have to throw them away.

    Link to FAQ post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    I prefer a neutral hydrogen water | What does Mr. Asenbaum think about this?

    Hello from Kiel!

    I have a degree in biology and work, among other things, as a health advisor and prevention practitioner. During my years of research, I repeatedly came across the topic of water and three years ago I decided on high-end drinking water treatment with molecular filtration, restructuring and energization and with stainless steel instead of plastic hoses.

    During my lectures and consultations, I am always surprised and encouraged by the great influence water has on our health. Inspired by a lecture on alkaline water, I came across your site and the very good compendium through research.

    The explanations about hydrogen water made me particularly curious. Since I am not convinced about alkaline water, as in my opinion it does not exist in nature as a living space or as drinking water, I prefer neutral hydrogen water. That's why I'm particularly interested in that AquaVolta Hydrogen Booster Classic.

    Metal hose

    Unfortunately, my reserves for new purchases are quite limited, so I would like to ask whether it is possible to pay in installments for the device. I'm looking forward to testing the hydrogen water and will recommend it if the results are good. Maybe you also offer the option of refinancing through referral...?

    With kind regards from the Baltic Sea,
    Thorsten W.

    Answer | We at Aquacentrum prefer alkaline hydrogen water, and not just because of its taste

    Good evening to Kiel,

    Well, before we offer you anything in installments, I would be interested to know why, of all people, a Dipl.Biol. does not see alkaline water as a habitat? Did you learn this in your studies or read it on an obscure website? I would simply recommend that you hold a pH measuring device in a larger river such as the Rhine, Danube, Elbe or Inn and ask a fisherman. Because they grow particularly large in alkaline waters. In some rivers you will find pH 8-9.

    Apart from that, hydrogen-rich water is of course interesting even without bases, at least for various oxidative stress diseases. However, I am rather put off by recommenders who want to receive discounts through referrals without having any experience or knowledge of their own and recommend that you do your research before approaching us with such a request.

    5-16 inch -8mm - polypropylene water hose - pressure-resistant 400

    Because of your training, you are generally welcome as a partner. But if you don't have any expertise about the different types of “plastic tubes”, things get a little difficult. Because all common water filters and electrolytic water treatment devices use such BPE-free compounds and not just stainless steel, which I consider to be far more problematic due to the nickel content.

    Further information can be found in the links at the bottom of this email:

    Sincerely yours,
    Karl Heinz Asenbaum.

    Link to FAQ post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Water ionizer after a reverse osmosis system: Can osmosis water also be ionized?

    Hello Mr. Akgün
    Here in Paraguay I have to reckon with residues from agriculture in the groundwater.
    Since I have my own well, I filter my groundwater with a reverse osmosis system.

    Hence the question; Do your devices, e.g. the EOS, work? www.aquacentrum.de/shop/eos-genesis-wasserioniser/ even if I connect a reverse osmosis system in front of it?

    The water that comes from such osmosis systems conducts electricity very poorly due to the lack of salts.
    Best Regards
    Harald Fenger

    Answer from Yasin Akgün | Mineralizing reverse osmosis water before ionizing it in the water ionizer

    Hello Mr F.
    I'm sorry that the email has only now come to my attention.
    Of course you can also use the EOS devices with RO water, the manufacturer has even made a mineral filter for this case:
    www.aquacentrum.de/shop/mineralisationkartusche-1-eos-genesis-revelation-platinion/

    What kind of RO system do you have?
    With or without tank.
    We need a minimum flow of 1 liter/minute, with back pressure through the internal filters of the EOS Genesis.

    Hope this helps you
    All the best
    Yours, Yasin Akgün

    PS: This filter is enough to filter out almost all chemicals, wherever they may be. Every reverse osmosis system only filters with the same filter media, namely activated carbon:

    www.aquacentrum.de/shop/wasserfilter-set-aquaphor/

    Hope this helps you. All the best, Yasin Akgün

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Comparison of 2 different hydrogen tablets | Hannes Pharma based on silicon and Hydronade®

    I am watching the development of methods for hydrogen enrichment in water with great interest. Unfortunately, as you know, I have only had failures so far. Now you also have Hydronade tablets on offer, which I would never choose over a device because of the price alone. During my search I found another product from Hannes Pharma.

    Have you ever looked into this (if so, what is the difference to hydronade?) and could you possibly offer this as it seems to be a lot cheaper than the tablets for hot water?

    Thank you and best regards
    mark a.

    Answer from Karl Heinz Asenbaum | Hannes Pharma hydrogen tablets compared with Hydronade®

     

    Hydronade H2 Magnesium effervescent tablets measured value

    Dear Mr. A.,

    Yes, of course I have looked into all the silicon preparations, for example active H. That is also a possible method. However, it is functionally inferior to the Hydronade Mg formula and is therefore more expensive rather than cheaper when you look at the facts:

    Active H tablets, for example, cost around 50 cents each and produce 1 mg of H2 in the water. Hydronade produces 1,6 mg of H2 and costs 81 cents. Effectively, Hydronade is around 1 cent more expensive per tablet. So the price is almost exactly the same. In my opinion, the taste result is significantly better than with Active H.

    I can't say anything about the Hannes Pharma product because I didn't know about it before. Silica nanocolloids? They write about it:

    “With the unique nanoclustering of silicon dioxide, it has been possible to reversibly bind the hydride ions in a silesquioxane form within the clusters. This means that they are released in a delayed manner with the dissolution of the stable 7-sided cluster structures, so that they reach the entire system and therefore do not lead to a temporary “base shock”.

    Oh well. I've heard more original fairy tales. Everything that is new and inventive is patented. It doesn't matter if it's true. Finally someone who uses the “sacred number 7”.

    It's just stupid that there are no such clusters. And what does a release of H2 from the Silesquiosan resin have to do with a base shock? Since when is hydrogen basic? This is probably more of a new smoke candle than a new product. It is probably nothing other than Active H based on Flanagan products. With a not insignificant amount of potassium, which can severely disrupt the sodium-potassium balance in the body.

    Just try both. You will be at Hydronad get stuck.

    And I still don't know why you don't get satisfactory results with the devices. Where is your satisfaction threshold? Why do you want extreme concentration? Just drink more.

    By the way: it is a misunderstanding if you think that the Hydronade tablets are just a product for hot water. These are of course primarily intended for cold water; they only offer an alternative option for use in hot water, which would be extremely difficult with other methods of hydrogen enrichment.

    Link to FAQ post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Can hot water also be enriched with hydrogen like in Ayurveda or hot tea?

    Benno B.:

    My wife and I usually follow Ayurveda's recommendation of drinking water that is room temperature to hot.

    Otherwise, we actually prefer drinking tea to cold drinks or even water.

    After working through your new book and the active water's not very long shelf life, I still don't know how to do this optimally and practicably in order to preserve the dissolved gaseous hydrogen and thus also the redox potential?

    Even if we were to use thermos flasks filled to the limit, the free hydrogen would gas out after we drank it for the first time and air would get into the flask.

    Answer from Karl Heinz Asenbaum on how best to combine hot drinks and hydrogen

    Video | Karl Heinz Asenbaum | Ayurveda and hydrogen:

     

    Hydrogen water as a cold and hot drink Hydronade®

    Yes, Ayurveda fans are not the only ones. Many people especially don't like drinking cold water. In Ayurveda, water is obviously always boiled for a long time. This not only serves hygiene, but also complete degassing. I think that's good when it comes to oxygen and carbon dioxide, but of course there's no hydrogen left. Since in Ayurveda the water is often drunk but not always in a heated state, the hydrogen can no longer be introduced into a hydrogen device through electrolysis because it simply would not dissolve at a higher temperature.

    Since the question comes up quite often and I didn't know the answer, I made a few attempts and described the solution in this video.

    What would work is a hydrogen fizzy tablet that you put in your drinking glass or cup once or twice a day. It works through a magnesium reaction with water, malic and tartaric acid and is not subject to Henry's law, at least not in part, because therapeutic levels can be determined even with hot water after 15 minutes. You can try it all out here:

    hydronade®- H2 fizzy tablets for producing magnesium-containing hydrogen water

    Kind regards, Karl Heinz Asenbaum

    Link to FAQ post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Hallo,

    I have the EOS Genesis water ionizer, which we have been using as a tabletop device. Since we are getting a new kitchen soon, I would like to install an undercounter. Do I need a separate tap for this? How big would the hole in the plate have to be for this faucet and how much would it cost?
    I can be reached by phone tomorrow or I would be happy to receive a message.

    Regards

    Manuela K

    Exchange the on-table water ionizer for an under-table ionizer

    Hello Ms. K.,
    Thank you for your email and your good question. You're in luck, I can make what you want happen.
    Your AquaVolta® EOS Genesis tabletop ionizer which is already over the satisfaction guarantee, against the almost best-selling water ionizer, AquaVolta® EOS Revelation II. Both devices are the most reliable water ionizers I have.

    The following video explains the installation: www.aquacentrum.de/produktcategorie/wasserioniser/untertisch-ioniser/

    I suggest you pay an additional 970 euros for a brand new EOS Revelation II water ionizer, or 870 euros for an almost brand new EOS Revelation II, in exchange for your 9 month old EOS Genesis. The filters are compatible. I will send all the necessary connection parts and accessories.

    Please let me know. All the best from Munich, Yasin Akgün

    Water ionizer exchange | On-table ionizer vs. under-table ionizer from EOS

     

    Undersink ionizer Revelation II

     

    Figure | AquaVolta® EOS Revelation II

    <!--
    YouTube

    By downloading the video you accept the privacy policy of YouTube.
    Read more

    Load video

    PGlmcmFtZSBsb2FkaW5nPSJsYXp5IiBzcmM9Imh0dHBzOi8vd3d3LnlvdXR1YmUtbm9jb29raWUuY29tL2VtYmVkLzA2aUs3NHZ4dTRJIiB3aWR0aD0iNTIwIiBoZWlnaHQ9IjI5MyIgZnJhbWVib3JkZXI9IjAiIGFsbG93ZnVsbHNjcmVlbj0iYWxsb3dmdWxsc2NyZWVuIj48L2lmcmFtZT4=
    ->

     

    AquaVolta® EOS Revelation II undersink water ionizer

    <!--

    YouTube

    By downloading the video you accept the privacy policy of YouTube.
    Read more

    Load video

    PGlmcmFtZSBsb2FkaW5nPSJsYXp5IiBzcmM9Imh0dHBzOi8vd3d3LnlvdXR1YmUtbm9jb29raWUuY29tL2VtYmVkL0dtNVFFZktCYV9VP3JlbD0wIiB3aWR0aD0iNTIwIiBoZWlnaHQ9IjI5MyIgZnJhbWVib3JkZXI9IjAiIGFsbG93ZnVsbHNjcmVlbj0iYWxsb3dmdWxsc2NyZWVuIj48L2lmcmFtZT4=
    ->

     

    Experience report | EOS Revelation under-table ionizer

    Link to FAQ post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    AquaVolta hydrogen booster portable PEM hydrogen generator with bottle

    Test purchase | Test AquaVolta® hydrogen booster to produce neutral hydrogen water

    I have a question about whether you can use the device AquaVolta® Hydrogen Booster Classic | PEM water ionizer | electric water ionizer can test.

    Since I already had bad experiences with several devices, I would buy it afterwards.

     

     

    Dear Ms. R.,

    Yes, we can send you an invoice with a 2-week list-free test, just order and then change the invoice:
    www.aquacentrum.de/shop/aquavolta-wasserstoff-booster-pem-wasserioniser/

    Don't worry, I know all the others, this one is the best of them all. It is very efficient in production, very beautiful, and above all, particularly reliable

     

    All the best from Munich

    Yours, Yasin Akgün

     

    Test video | Hydrogen Booster | Hydrogen test by titration method | H2 Blue Kit

    Link to FAQ post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Jürgen J.: In spring 2016 I gave you the H2 blue test drops for hydrogen measurement to test. However, they initially rejected them and also criticized the certification of the drops by Tyler Le Baron's Molecular Hydrogen Foundation. Now you even import and recommend these drops yourself and make your previous Trustlex test device bad! Why did you change your mind so radically?

    The drops you sent me had already been opened and did not show plausible hydrogen values ​​as soon as it was alkaline activated water from a water ionizer. Maybe they were outdated. Or the formula was only suitable for neutral hydrogen water and magnesium-hydrogen water. I have explained the possible reasons for this on pages 101 – 103 of this book.

    Due to the completely unacceptable results with the drops, I started an intensive exchange of opinions with Tyler Le Baron, the founder of the Molecular Hydrogen Foundation. This would now fill another book.

    It is the most fruitful dialogue I have had on a water issue in the last 13 years. So here's just the result: Tyler Le Baron we now agree on most of the statements about the hydrogen revolution. We (still) have different views on the benefits of alkaline. There are 76 years of experience for basic hydrogen water and 10 years for neutral hydrogen water. However, the overall scientific assessment is still open.

    In collaboration with Randy Sharpe, the manufacturer of the H2 blue® drops, the problem of the implausible results was solved. In August 2016 I received drops made with new platinum colloid and stronger buffer directly from the USA. They worked without any problems and also displayed correct values ​​for water ionizers, so I can now highly recommend them.

    They are now also offered by two German companies. So I didn't change my mind about your drops, but rather I made sure to improve the drops available in Europe. Many suppliers of water ionizers now work with the drops such as Enagic®, Alkaviva®, Tyent® and Echo®. The products from my own brand AquaVolta® are also tested with the H2 blue drops.

    Water ionizers don't have to hide their hydrogen values, because they often do significantly more than specialized hydrogen infusion machines, chemical water ionizers or magnesium tablets. Can be read on pages 104 – 108 of this book.

    In fact, Tyler Le Baron tells me in an email dated 3.8.16/2/XNUMX that sales of classic water ionizers have "increased dramatically" for some vendors since they started using the HXNUMX blue drops to "demonstrate the presence and therapeutic levels of hydrogen." That works the claim that water ionizers can only store a small amount of hydrogen in water, which has been circulating as fake news on social media since mid-2016, completely empty.

    The drops have the advantage that they are a method that can also be carried out by laypeople. Laboratory measuring devices for dissolved hydrogen, for example from the company Unisense, not only cost a five-figure amount, but also require very complex maintenance and care.

    Of course the drops also have limits:

    • they do not last longer than 1 year
    • If dissolved oxygen is present in the water, the measurement result will be incorrect
    • The same applies to chlorine content or if other oxidizing substances are dissolved in the water
    • Even if antioxidants other than hydrogen are dissolved in the water, such as vitamin C, the results are incorrect. The reduction of the dye used, methylene blue, to transparent leucomethylene also occurs through other antioxidants.

    When I first heard about the H2 blue® drops, I was in Korea and saw that many manufacturers of water ionizers and hydrogen boosters were all using the Trustlex ENH 1000 in their development departments to detect hydrogen. Nobody used an “official” laboratory measuring device. With a price of around €600, the Trustlex is of course much cheaper in the long run than the drops, especially if you want to carry out a lot of measurements. But this device does not measure dissolved hydrogen at all, but rather calculates it from the millivolt value of the redox potential using a formula from the manufacturer. Because that's only what the device's electrode can measure. This redox value is then multiplied by – 2,16 in the example below. Done and wrong!

    In fact, this water had dissolved not 1591, but 2000 ppb. In another case, with an Aquator® brand top ionizer, the Trustlex showed 1618 ppb (1,6 ppm) while checking with the drops only showed 200 ppb (0,2 ppm) of actual dissolved hydrogen.
    At my persistent request The head of the manufacturing company informed me on May 24.5.2016, 1000 that the Trustlex ENH XNUMX “hydrogen measuring device” could neither be used for product development nor for experiments. In particular, it is unsuitable for alkaline water. In fact, my comparative measurements on page 107 f show that the Trustlex device's measurements come closest to reality when it comes to heavily filtered, pH neutral or reverse osmosis (ROW) water. Trustlex now has the warning against professional use on its website:
    http://www.trustlex.co.jp/ english/products/enh1000.html

    So I can only warn against manufacturers and distributors who advertise Trustlex values ​​that they measured with this device. Unfortunately, I have to admit that I've been with this for almost a year Fake measuring device measured before the fraud was heavily criticized, particularly by Prof. Shigeo Ohta.

    The last hurdle to overcome when measuring hydrogen is that the drops are not suitable for cloudy or colored liquids, but actually only for measuring water.

    Excerpt from the book by Karl Heinz Asenbaum: “Electro-activated water – An invention with extraordinary potential. Water ionizers from A – Z”
    Copyright 2016 www.euromultimedia.de

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Raymond N.: I have a question about the hydrogen booster, I have a small water swirler that I bought from CELLAVITA. Is the effect the same as the booster? I assume not but I would be very happy if you could explain to me what the difference is.

    I coined the term “hydrogen booster” analogous to the term —> base booster. It is intended to describe devices and methods that specifically add dissolved molecular hydrogen to drinking water. The term booster is intended to express that the water may already contain dissolved hydrogen (dH2) and that you want to increase this content even further with the booster. This applies, for example, to alkaline activated water from an older water ionizer, which often cannot reach the normal saturation limit of 1,6 mg/l (1,6 ppm or 1600 ppb). This particularly applies to older people —> Pot ionizer Russian design, which rarely achieve more than 0,2 ppm due to the long production time, open design and excessive voltage.

    Hydrogen-forming fizzy tablets can be used for boosting, but they are relatively expensive and usually have a problematic taste. What your question refers to is an electrolytic hydrogen booster that works similarly to a pot water ionizer (see p. 83 ff), but thanks to its pressure-tight construction and the use of very low voltage, even supersaturated hydrogen concentrations of up to around 6,0 ppm can build up.

    The difference to the way a water whirler works, to which your question relates, is the following: the water whirler adds air to the water. Air contains oxygen, nitrogen and particulate matter etc, but practically no hydrogen gas. Instead of the Cellavita Hexagon Water Whirler, you could also have used your blender or hand blender. More information under the heading –> Twisters.

    The electrolytic hydrogen booster, on the other hand, produces hydrogen gas through the electrolysis of water molecules. At the same time, it removes the oxygen released so that the water can store more hydrogen.
    The water from the booster is as much or little hexagonal like the water from the swirler when the temperature is the same.

    Excerpt from the book by Karl Heinz Asenbaum: “Electro-activated water – An invention with extraordinary potential. Water ionizers from A – Z”
    Copyright 2016 www.euromultimedia.de

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Ask Hydrogen booster: Condensation water tank? Tritan bottles possible? How long? pour it back up to store bottled water?

    Dear Mr. Akgün,

    We have put the booster into operation and still have the following questions:

    – Contrary to the instructions, the condensation water tank is full after just 15-20 minutes, is that okay?
    – Do the Tritan bottles from your shop fit the H2 booster or are there adapters?
    – What is the maximum number of minutes you can boost for PET bottles and glass bottles and with the associated piston? Can too much excess pressure build up?
    – If I fill the bottle to the brim, of course there will be less in it after boosting. Does it then make sense to fill it up again with normal water and then screw the lid on so that it lasts longer in the bottle?
    -What is the half-life for spring water-like water in transparent glass bottles, green glass bottles, PET bottles and Tritan bottles?
    Thank you very much and best regards from Bonn
    Petra M.

    Answer from Yasin Akgün about the questions about the hydrogen booster to generate hydrogen water

    Sorry for the delay Ms. M.:
    – Contrary to the instructions, the condensation water tank is full after just 15-20 minutes, is that okay?
    >>It's only like that at the beginning, not later on

    – Do the Tritan bottles from your shop fit the H2 booster or are there adapters?
    >>no, fortunately not...

    – What is the maximum number of minutes you can boost for PET bottles and glass bottles and with the associated piston? Can too much excess pressure build up?

    >> You can build pressure for up to 30 or more minutes.
    After the 5 or 10 minute electrolysis, please shake with the booster for about 10-20 seconds in the pressurized atmosphere, the hydrogen content increases almost twice as more hydrogen is then dissolved into the water.

    – If I fill the bottle to the brim, of course there will be less in it after boosting. Does it then make sense to fill it up again with normal water and then screw the lid on so that it lasts longer in the bottle?
    >> Yes, that makes a lot of sense. It makes even more sense if you take the booster with you and boost the water again before you drink it.

    -What is the half-life for spring water-like water in transparent glass bottles, green glass bottles, PET bottles and Tritan bottles?
    >>Everything is very difficult to say. But you can expect a half-life of around 2 hours if the glass bottle is not full. It decreases faster with plastic.
    On the other hand, with a bottle filled full of water without any air pockets, it should last for several days, slowly disappearing, but it's really hard to say and very dependent on several factors/degrees of freedom.

    And does the water taste good to you and is it good for you?
    All the best
    Yours, Yasin Akgün

    AquaVolta hydrogen booster portable PEM hydrogen generator with pressure vessel

     

     

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Dirk B.: Reducing TDS ppm is apparently only possible with reverse osmosis. I've been using an AcalaQuell One for a few days because it works with PI technology. At least he reduced the nitrate from 20 mg/L to 2 mg/L, the total hardness from 14 to 8 dH, ppm from 335 to 190 ppm, although it has now increased to 230 after a few days. I would like a ppm <80, maybe I'm overestimating this value. And I wanted to stop carrying water bottles, even though I really like the values ​​of the Plose water. I can't really get used to the osmosis systems yet... too unnatural? I'm very interested in the AquaVolta® hydrogen booster, and it's also interesting in terms of price, compared to the Lourdes generator.

    TDS ppm (—> conductance) without knowing what you are lowering makes no sense. There is no reasonable target value, because 1 ppm of lead, arsenic, uranium or mercury is extremely dangerous, while 600 ppm of calcium and magnesium can make for super drinking water.

    Plose water would not be approved as drinking water in many countries because it contains too few minerals. For example in Israel, where they are very strong —>Reverse osmosis Fortification with 50 mg/l calcium is required by law in order not to endanger the health of the population. Plose water only contains 2,3 mg/l calcium.

    For real problem water, there is often no better option than a reverse osmosis system. But for good reasons I have never recommended a reverse osmosis system without a mineralization cartridge. I even recommend this when using a hydrogen booster, which theoretically also works with demineralized water. However, a good filter is usually enough, as described in this book on pages 19 – 21.

    According to the tests presented by the manufacturer, the Acala Quelle water filter is also suitable for this. However, it is a stand filter where the water stands up, whereas with the Aquaphor Modern you always get freshly filtered water.

    Reducing nitrate is definitely not a bad thing. But more important are the agricultural pollution that comes with the nitrate into the water. Some of them are not conductive at all, so they don't even appear as TDS ppm. A pure nitrate filter only creates a false sense of security.

    In my opinion, the Lourdes hydrogen generator is overpriced because it cannot build up excess pressure to achieve high hydrogen values ​​like a hydrogen booster. 1,2 ppm dH2 is the highest that comes out under favorable water conditions. However, the measured values ​​that are presented on the Internet are usually completely wrong.

    Excerpt from the book by Karl Heinz Asenbaum: “Electro-activated water – An invention with extraordinary potential. Water ionizers from A – Z”
    Copyright 2016 www.euromultimedia.de

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Bernhard F.: What should we think of the alkaTest® alkaline content test?

    This test involves a type of blue lipstick that you should apply to the crook of your arm. Depending on how long it takes for the blue to turn pink, you should be able to assess the blood buffer and the blood pH situation. There is also an apparently similar product called Toxikator®.

    Our test subjects did not show any changes in the color application within the allotted time, although according to medical evidence they did not have a severely contaminated mineral and acid-base balance. However, the Alkatest result would have suggested such a diagnosis.

    The quality of the diagnosis can be doubted anyway, since the condition of the skin surface is exposed to so many external influences that the condition of base excess and hydrogen carbonate in the blood cannot be determined from this. Safe values ​​can only be determined through a blood gas analysis.

    Excerpt from the book by Karl Heinz Asenbaum: “Electro-activated water – An invention with extraordinary potential. Water ionizers from A – Z”
    Copyright 2016 www.euromultimedia.de

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Question about titanium electrodes

    Can you please briefly explain to me what makes the difference whether the electrodes were galvanically coated or sprayed?

    I'm interested in that Water ionizer Cavendish 9 / Moses 9.

    gruß

    Thomas O

    Answer from Yasin Akgün about the differences in coating processes for electrodes for water ionizers

    Hello Mr. O.,
    So the Kangen sellers and others make the galvanic the No. 1 and say the spraying process is low quality

    The manufacturer of AquaVolta® Cavendish / Moses 9 water ionizer has so far produced the most models and numbers in the world, is the oldest manufacturer and the first in Korea
    And they have developed a special spraying process that offers the highest levels of efficiency
    We can confirm that too.
    The highest hydrogen content and also the highest values ​​in terms of pH or redox potential.

    Attached is their document about it or I have created an FAQ:
    Here you go to FAQ

    The AquaVolta® Cavendish 9 / Moses 9 is probably my best device currently.
    Therefore, you have my fullest assurance, it is in stock as of today.
    All the best
    Yours, Yasin Akgün

    Contents about the comparison of coating processes of titanium electrodes for water ionizers

    from the PDF from the company IONIA, the manufacturer of the Moses 9 water ionizer

     

    Differences in coating processes for electrodes for water ionizers-1

    Differences in coating processes for electrodes for water ionizers-2

    Differences in coating processes for electrodes for water ionizers-3

    Differences in coating processes for electrodes for water ionizers-4

    Differences in coating processes for electrodes for water ionizers-5

    Differences in coating processes for electrodes for water ionizers-6

    Differences in coating processes for electrodes for water ionizers-7

    Link to the post

  • Moving to Rosenheim says:
    Your comment is waiting for moderation. This is a preview, your comment will be visible after it's approved.
    Disassembling and assembling furniture can be nerve-wracking. Think about it whether you hire professionals for this.
  • Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Hello Mr Akgün,

    thanks for your answers.

    1) I have already taken pH measurements. The two pictures attached are the results of this. I reached ph9 at level 3.

    2) I had already suspected that the leak stopper could be the cause. When I have the sleeve I will try to convert it again.

    3) It's hanging for me Eos on a switchable socket and I unplug it every day. When I turn it on again the cleaning program always runs. Is that good or bad? It wouldn't bother me.

    Thank you for your answers. All the best,

    Thomas F.

    PS: The water still tastes very good. I usually drink level 3.
    PPS: I only removed the protective film this evening.

    Answer from Yasin Akgün

    Hello Mr. F.,

    Thank you for your email and also your question.

    Don't worry, the device won't mind if it's unplugged every day. Self-cleaning is something useful anyway.

    The pH measurements are perfect, you have adjusted the flow perfectly. Since the penultimate level 3 is still blue, i.e. approximately pH 8, and the penultimate level has already tested purple, i.e. pH 9, you can be sure that the last level, level 5 on the EOS Touch, other devices do not have level 5 but only 4 levels, it is definitely extra alkaline, so it will have a pH of 10 or 10,5, which is what I like to drink the most.

    So I wish you all the best with the delicious water

    Bye for now

    Yours, Yasin Akgün

    Thomas F Eos Touch experience report water ionizer alkaline water2

    Thomas F Eos Touch experience report water ionizer alkaline water

    Link to the post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Hello Mr Akgün,

    I received your email, thank you!

    Since I'm currently working in Austria (I'm not at home often) it's not possible for me to order the Maximus, but I'm still very interested in this technology.

    Can you briefly explain to me why the P40, in contrast to the P16, requires a permanent consumer? I can't immediately think of any permanent consumer in the household, even the refrigerator doesn't run all the time.

    Then the P40 should be on the floor, so I first have to find a place in the apartment.

    I'm really looking forward to an answer

    Best regards, Olf H.

    Dear Mr. H., I would be happy to answer your questions:

    1. Basically, the batteries of the Maximus should have a minimum current flow of approx. 5mA (milliamperes) constantly or several times a day. With the usual mains voltage of 230 volts, this is approx. 1,2 watts of power. 
    2. 1,2 watts of power is usually less than the consumption of a cordless telephone (the station), an answering machine, fax machine or TV/satellite device in standby! 
    3. 1,2 watts of power can also be easily consumed by a very small LED lamp/emergency lighting... 
    4. The P16 has an LED lamp like this already installed. 
    5. The big difference between the P16 and the P40 plug is that the P40 plug harmonizes a much larger field and also covers a much larger bandwidth. 
    6. Thanks to the integrated water beads, the P40 plug also harmonizes water (to a certain extent) - radon exposure is also covered. 
    7. You can place the device on the floor or in or on a piece of furniture. – The only important thing is that it is horizontal and that the two additional earths are in contact with the surface (e.g. piece of furniture). 
    8. Basically, 1 piece of P40 plug is a “basic device” which can be expanded with additional P40 plugs - in practice it has been shown that up to 4 pieces of P40 plugs are useful.
      In the premium sector, the M250 currently makes perfect sense for a single-family home. – Here too, if necessary in combination with a P40 plug. 
    9. M250, M500 and M1250 are recommended in stables/for sensitive livestock (e.g. turkey breeding).

    All the best from Munich

    Yours, Yasin Akgün

     

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Good day,

    How long is the inlet and outlet hose for the Aqua Volta EOS Revelation II (under-table)?

    Thank you in advance

    Answer from Yasin Akgün about the sewage hose and water hose and their length

    Hello Mr. E.,

    Approximately 3 meters of 1/4” hose is delivered. It is then shortened as desired with scissors.
    However, we can also provide you with even more hose AquaVolta® EOS Revelation send.
    Let me know.

    The supply and waste water hose on the EOS Revelation can be of any length.

    The electrical cable from the control tap is the more limiting factor.
    But we had extension cables made by the manufacturer just in case.
    In other words, you have free choice.

    The distance between the control tap and the system should not be too far, i.e. not 10 meters or so.
    But the inlet hose can also be 10 meters long, that's not so bad.

    Hope this helps you
    I look forward to your feedback
    Happy Holiday
    Yours, Yasin Akgün

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Dear Mr. Akgün,

    I am interested in the AquaVolta hydrogen booster and have a few questions about the product. What material are the electrodes made of? Does the membrane have to be replaced after several uses or does it last forever?

    Thank you, greetings Felix

    • and what material is the membrane made of?

    Answer from Yasin Akgün about the materials of the water cell of the AquaVolta® hydrogen booster

    Hello dear Felix,

    thank you for your question.

    The electrodes are made of titanium and are galvanically coated with platinum.

    The membrane material is a polymer from the renowned manufacturer Dupont. Very high quality, there are not many manufacturers. And otherwise, it will last for years as long as it does not run dry, i.e. is operated without a battery or is left open for a long time. We have experience with normal water ionizers that work perfectly even after 12 years.

    Hope the answers help you. Just test it, Yasin

     

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    I have another question: Is it correct that the pillow is for therapeutic purposes is intended and not for sleeping during the night. I think it's way too hard to sleep on...right?

    The BioMat Amethyst pillow can be used both at night and during the day.

    It transmits the energies of the Biomat, but blocks the heat radiation.

    As you have already realized, the pillow or the tourmaline amythyst cover is too hard for most people and they prefer their own pillow.

    However, the cushion cover can be easily removed so that you can only use the molded foam cushion.

    Uwe Karstädt, alternative practitioner and author

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Good day,

    up to what size can it ZOOMlus DDFT01 fine dust filter? I am looking for a device that can also filter nanoparticles, ideally one that filters from 10 nanometers onwards. But a size of 20 nm and above would still be ok.

    Thanks in advance!

    Kind regards

    Tobias Neumann

    Mr Barnickel,
    I'm stumped, could you please write me an answer
    Thank you
    Yours, Yasin Akgün

    Good morning Mr. Akgün,

    Even the smallest particles can be filtered through wet filtering with vegetable oil. We therefore cannot specify a lower limit for the particle size.
    Unfortunately, we do not have any test results or empirical values ​​available for filtering nanoparticles with our Zoomlus air purifier. We therefore cannot guarantee that our device meets the requirements.

    With kind regards,
    Otto Barnickel

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Hello Mr Akgün,

    Two problems still need to be solved:

    There is no power socket in the base cabinet of our fitted kitchen in the company meeting room. These are only above.

    Does this mean that an additional hole needs to be drilled through the kitchen countertop for the power cord?

    This causes optical problems.

    How did other users solve this?

    Hello Mr. L.,

    Thanks for your question.

    We absolutely need electricity, otherwise it won't work. You could either have a socket installed under the sink, or perhaps connect power via an extension cable

    The other option is to route it from top to bottom, but then there would be a hole at least as thick as the diameter of the power plug cable. You could separate the plug and then fit a new plug to it after running it through the hole.

    I hope this helps you

    All the best from Munich, Yasin Akgün

    Link to FAQ post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Hello Mr Akgün,

    Enagic advertises that their devices are so unique. In addition to its longevity, they also write that the water, in addition to being alkaline, also has a very high ORP content and a very small cluster structure.

    What about other devices? Isn't alkaline water very antioxidant and naturally small-clustered anyway?

    Thank you and best regards
    Carola S

    Hello Ms. S.,
    Thank you for your feedback.

    That with the Kangen Enagic Ionizers and the other manufacturer brands are like cars:
    They get us all from A to B, some faster, some slower, some break down more often, but others use better fuel, etc.

    It's the same with the ionizers, same technology, same materials (electrodes made of titanium, galvanic coating made of platinum), just outdated, since the Kangen Enagic systems don't have a flow indicator on the display, and the Kangen Water systems don't have satisfactory limescale protection and can only be installed on the faucet with a large plastic diverter valve. You can't regulate the flow either, which is essential. The faster the water flows through a Kangen water ionizer or water ionizer in general, the weaker the results.

    The main value that tells you how powerful an ionizer is is the molecular hydrogen content.
    At Kangen this is around 1200ppb (parts per trillion, equivalent to 1,2 mg H2 per liter of water).

    With our best ionizers at 1600-1700 ppb, more is not possible:

    www.aquacentrum.de/shop/eos-revelation-ll-untertisch-wasserioniser/
    www.aquacentrum.de/shop/eos-genesis-wasserioniser/
    www.aquacentrum.de/shop/eos-touch-wasserioniser/
    www.aquacentrum.de/shop/aquavolta-moses-7-wasserioniser/
    www.aquacentrum.de/shop/aquavolta-eca-plus-wasserioniser/

    The last water ionizer, the ECA Plus Water Tractor is the better alternative to the Kangen, all with modern technology.
    With flow displays for the current flow, in liters/minute and also the remaining filter running times for both filters.
    It also has flow regulators. A real dosing pump for dosing the brine. 2 electrolysis cells, each intended for its respective purpose. Can be permanently installed and installed on the faucet. and much more.

    Just test one and compare it with a Kangen that may be available
    pH value and redox value for example
    I also have the blue drops for you to test, which I would then donate to you:

    www.aquacentrum.de/shop/h2-blue-kit-wasserstoff-testfluessigkeit-durch-titrationsverfahren/

    Hope this helps you
    I look forward to further questions
    All the best from Munich
    Yours, Yasin Akgün

    Link to the post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Email question about 15 year warranty for Aquion water ionizers, asked to Aquion on July 11, 2016

    Hello Ms. T.,

    Just wanted to know that.

    You have now given all devices a 15-year guarantee, do you still have to be the same customer who is registered with you with the system?

    Thank you, Yours, Yasin Akgün

    Reply from Aquion on July 11, 2016:

    Dear Mr. Akgün, 

    A customer receives the 15-year full guarantee after returning the guarantee card to us.

    Unfortunately, a guarantee transfer for private sales is not possible.

    With kind regards,

    ST

    Question from Yasin Akgün on July 23rd:

    Thank you for your answer Ms. T.,

    And the warranty card has to be sent to the Aquion / Salux network within the first 2 weeks after purchase, right? Or is it possible at a later date?

    Thank you, Yours, Yasin Akgün

    Answer from Ms. T. on July 23rd:

    Dear Mr. Akgün,

    The deadline for returns is 4 weeks from the date of purchase. 

    With kind regards,

    Sandra Tippe

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    What exactly is Asea and the redox signaling molecules etc.?

    Asea is a company from the USA that successfully sells a special bottled water worldwide.

    According to some patents, it is distilled and then deionized (almost mineral-free) water, which is then mineralized again by adding small amounts of sodium chloride (NaCl, table salt) and then subjected to electrolysis for three days. The result is then the neutral anolyte from an ECA system that is known in German-speaking countries. Since the neutral anolyte is a mixture of the basic catolyte and the acidic anolyte, the pH value is between pH 4 and pH 8,5, depending on the mixing ratio. So you can create alkaline, but still disinfecting water.

    The following is an excerpt from one of Asea's patents:

    “Electrolyzed saline solution containing concentrated amounts of ozone and chlorine species – Abstract

    A microbiocidal solution for in vivo and in vitro treatment of microbial infections containing an electrolyzed saline solution having a content of regulated amounts of ozone and active chlorine species. The ozone content is 5 to 100 mg/L (milligram per liter) and the chlorine species content is 5 to 300 parts per million (ppm). The active chlorine species comprises free chlorine, hypochlorous acid and the hypochlorite ion as measured by a chlorine selective electrode. The solution is prepared by subjecting a 1% or less saline to electrolysis under conditions sufficient to produce the active ingredients. The solution is used at an isotonic saline concentration and my be adjusted with hypertonic saline. The solution is used in vitro treatments of infected whole blood, blood cells or plasma to reduce contamination. The solution may also be administered to warm blooded animals, including humans by intravenous injection.”

    Quote from this Asea patent specification

    rel = ”nofollow”

    This is how you could produce Asea yourself with a water ionizer:

    1. You need a reverse osmosis system, the Aquaphor Morion RO system is the only possible one because it feeds the pressure of the water storage tank via the water pipe and therefore always provides a constant pressure or enough water flow.
    2. The ECA Plus water ionizer is also a requirement as this is the only one that has salt added
    3. Now it's time to experiment to produce the different anolyte-catolyte water soups. The goal is to ultimately achieve a pH value similar to that of the water from the Asea bottle. A pH color indicator for measuring the pH value is sufficient
    4. The dissolved hydrogen content could also be measured using the titration method, for this you need the H2 Blue Kit color drops.

    The following variations with the different factors can be practiced:

    • Experiment with the salt dosage by changing the concentration of the brine, using more or less like 18 grams of salt
    • With the added salt for the brine tank. It can be sea salt, Himalayan salt, pure NaCl, or mountain salt, etc
    • Experiment with flow, the ideal flow for the production of anolyte and catolyte is around 1,1 liters/minute. But you can go up to 1,5 liters/minute
    • Mix the two waters (from the outlet at the top and from the water hose at the bottom) on the strong sour (with the addition of salt) level
    • Mix both waters together on a strongly alkaline basis (with the addition of salt).
    • But you can also play with the ratios of acidic anolyte and basic catolyte

    Further information about the different 8 basic waters from the ECA Plus is available towards the end of the Instructions for the ECA Plus Water Tractor described.

    Link to the post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Hello!

    Thanks for the reply.

    We have hardness level 21. Do I now have to descale the device every 3 weeks? Our neighbor has the Kangen device and I think he said he has to do it once a year. Or was that service? Does the ECA Plus also have to be sent in for service once a year, like the Kangen Enagic Leveluk water ionizers?

    Reply from Yasin Akgün on October 12th. 2016:

    Hello Mr. R.,

    You will notice the time for descaling because the water that comes out of the top will eventually become thinner from the jet and less from the flow volume per unit of time.

    What comes out of the wastewater hose becomes more and more, so to speak, beats the water that came out at the top in terms of volume flow.

    Depending on the slowness of the inflowing water and the ionization level set, you should descale every 3-12 weeks; if your hardness is 21 dH, it is better to descale every 3-6 weeks. It's not difficult: www.aquacentrum.de/ioniservertrag/

    Your neighbor is probably running a very high flow and not the strongest setting, and probably doesn't even notice if it has calcification because water always comes out with few bubbles.

    He doesn't work to extremes because he doesn't know how to work to extremes.

    The Kangen Enagic Leveluk water ionizers do not have a flow meter and no person has explained the flow issue to him.

    The slower the flow, the stronger the results, the faster the scale build-up in the water ionizer outlet

    Hope this helps you

    Kind regards from Munich

    Yours, Yasin Akgün

    Link to the post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Titanium electrodes galvanically coated with the precious metal platinum

    Hello Mr Akgün,

    I was asked what material the electrode is for electrolysis technology the Aquavolta Booster uses. Titanium too?

    Or other material? I look forward to receiving information material for our patients.

    LG Michael W.

    Answer from Yasin Akgün about electrode material:

    Hello Dr. Michael W.,

    Almost all electrolysis devices have titanium as a base material and a platinum layer that reliably delivers its catalytic performance even after 12 years.

    We know this from old water ionizers that we received back from customers for inspection; we ourselves are amazed at how a 12-year-old water ionizer can still produce above pH 10.

    The manufacturer who was the market leader in Korea at the time and who brought the technology to Korea is Ionia, whose best systems we also offer:

    www.aquacentrum.de/shop/aquavolta-moses-7-wasserioniser/

    www.aquacentrum.de/shop/aquavolta-eca-plus-wasserioniser/

    Hope this helps you

    All the best

    Yours, Yasin Akgün

    PS: Further information in our FAQ post about electrodes and materials: www.aquacentrum.de/faqs/elektroden/

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Dear Mr. Asenbaum,

    I work with your Aquabooster and so far have mostly made water with plastic water bottles, which I find very unpleasant (plasticizers, etc.), especially since I can use it at home
    can work with glass. I've been trying to find a solution for 2 months now - I've tried BPA-free bottles (none fit the adapter), and glass bottles (most threaded).
    don't fit and the ones that do fit don't close completely tightly).

    I found a single one that fits well into the adapter due to the bottle thread, but after three to four minutes water comes out next to the neck of the bottle - an additional seal
    doesn't help either.

    I've already asked Yasin about the problem, but I haven't received a satisfactory answer (statement: "the adapter also fits glass bottles"). I assume either
    Is it due to the pressure build-up and since the glass bottle creates more counter pressure, like a plastic bottle it pushes the water out or another possibility: the edge of the glass bottle (which is clear
    thicker than plastic) a little too thick.

    Have you tested this or do you know of glass bottles that are tight even with 2 x 7 minutes of production) I'm also asking because I already have the second booster, because the rubber for switching on and off broke on the first one, allowing water into the device could run.

    With kind regards,

    Practice Manfred G.

    Answer from KH Asenbaum | Seals and tightness of the AquaVolta® hydrogen booster

    Dear Mr. G.,
    Of over 100 glass and plastic bottles tested, only two non-German glass brands have so far not fit tightly into one of the two adapters. However, you have to be very careful when screwing in, screw in very straight and firmly and also make sure that the sealing rings are seated correctly. Maybe just take a little more time.

    You also don't have to press the power switch so hard that it slides away. All it really takes is gentle pressure.

    The devices are designed by the manufacturer for 5-7 minutes of use. Therefore, the glass container supplied is not very pressure-stable, but it can easily last for 10 minutes. Of course, larger quantities of liquid require a longer production time. I have with one 1 liter Miron glass bottle ionized easily for 60 minutes. With plastic bottles, as unpleasant as they may be, it takes even longer because they are not rigid against the pressure and can also be screwed into the thread more elastically.

    With kind regards,
    Karl Heinz Asenbaum

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Hello Mr. T.,
    The glass tube has two different threads, just screw it the other way around.
    See also the new video:
    www.aquacentrum.de/shop/aquavolta-wasserstoff-booster-pem-wasserioniser/
    All the best, Yasin Akgün

    Link to the article

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Good afternoon Mr. Akgün
    Your delivery arrived safely last Monday – thank you very much for that.
    Last Monday I tested the boosters briefly and noticed that they didn't work straight away. Today I did a few more runs. The following video was created (see attachment).

    Both boosters have been filled to the brim with the tractor's Level 3 Alkaline Water and are in their second 7-minute run.

    on the left of the picture: There seem to be more bubbles rising here (quantity) than on the right; the bubbles are medium sized; stream of bubbles is wider; the booster makes a noise reminiscent of CO2 water tingling; Minimally more condensation occurs

    right: the quantity of bubbles seems to be less; the bubbles are very fine, between these fine bubbles a kind of “mist” of superfine bubbles rises, but very large bubbles also rise; the stream is thinner, “slower” and forms slight eddies; In addition to the tingling, there is a slight gurgling sound; the water is milkier after boosting; There is a louder noise when you open the lid

    Where do you think the “better” water comes from?

    Best regards, DennisL.

    Where do you think the “better” water comes from?

    <!--

    YouTube

    By downloading the video you accept the privacy policy of YouTube.
    Read more

    Load video

    PGlmcmFtZSBsb2FkaW5nPSJsYXp5IiBzcmM9Imh0dHBzOi8vd3d3LnlvdXR1YmUtbm9jb29raWUuY29tL2VtYmVkLy1MZWJGeHU0SWdvP3JlbD0wIiB3aWR0aD0iNTIwIiBoZWlnaHQ9IjI5MyIgZnJhbWVib3JkZXI9IjAiIGFsbG93ZnVsbHNjcmVlbj0iYWxsb3dmdWxsc2NyZWVuIj48L2lmcmFtZT4=
    ->

     

    In comparison | Two hydrogen boosters from the same delivery

    Reply from Yasin Akgün on October 20th. 2016 | Hydrogen booster | Running-in time and tightness

    Hello Mr. L., thank you for your questions, which I would like to answer as follows:

    Each hydrogen booster should first be soaked in water for 12 hours. You can also speed this up a bit by filling the hydrogen booster with warm water (maximum 50 degrees) and “soaking” the membrane before using it for the first time. Or just leave it filled with water for 12 hours. The video on the right shows this again. I created it last Sunday.

    Otherwise, the pressure build-up. After you have ionized for at least 7 minutes (green level), you should feel or hear a pressure build-up when you open the lid. However, there are two sides to the glass tube. One is leaking. The other one doesn't.

    But water bottles are best. These have a much smaller area to seal, and it is not a glass tube, but a water bottle. One side of it is already closed. Plastic bottles are probably best because the pressure can build up best in them, better than in solid, non-stretchable glass bottles.

    You can also see the following video as an informative music video (2 music tracks can be heard):

    <!--

    YouTube

    By downloading the video you accept the privacy policy of YouTube.
    Read more

    Load video

    PGlmcmFtZSBsb2FkaW5nPSJsYXp5IiBzcmM9Imh0dHBzOi8vd3d3LnlvdXR1YmUtbm9jb29raWUuY29tL2VtYmVkLy0tTEk4N08td1lzP3JlbD0wIiB3aWR0aD0iNTIwIiBoZWlnaHQ9IjI5MyIgZnJhbWVib3JkZXI9IjAiIGFsbG93ZnVsbHNjcmVlbj0iYWxsb3dmdWxsc2NyZWVuIj48L2lmcmFtZT4=
    ->

     

    Video hydrogen booster accessories and initial commissioning

    The thing with small and large bubbles:

    That has nothing to say, because I think it also has something to do with the duck that has already built up in the bottle, the particularly large bubbles that you pictured in your video are just accumulated hydrogen bubbles that have formed under the electrode. Of course, it's all hard to judge, even if you've taken the trouble to watch the video. But there is a really simple solution as to how we can both know for sure. Just test it. Finally there is the possibility. Unfortunately, this option also costs as much as it costs you. €32,70, but it's worth it:

    www.aquacentrum.de/shop/h2-blue-kit-wasserstoff-testfluessigkeit-durch-titrationsverfahren/

    Also test how the whole thing behaves if you swap the glass bodies. Maybe it's the seal or something. I look forward to your feedback, which I will then publish here.

    Kind regards from Munich, Yasin Akgün

    Update hydrogen booster after the first two days

    Good evening Mr. Akgün

    ..The matter with the boosters has been clarified in my opinion. It was a false alarm on my part - I'm really sorry!!!

    I saw your video – thank you for that. I also soaked the booster membranes overnight, but it wasn't 12 hours.

    I filled both boosters with water again, the 12 hours turned into 48 for me, hence the late reply.

    Now there is a homogeneous appearance when the bubbles form (unfortunately it doesn't come across as well on the video as it does in real life) and the boosters make the same noise when working.

    You now hear the same noise when you open the lid - so everything is fine!

    Best regards

    DennisL.

    <!--
    YouTube

    By downloading the video you accept the privacy policy of YouTube.
    Read more

    Load video

    PGlmcmFtZSBsb2FkaW5nPSJsYXp5IiBzcmM9Imh0dHBzOi8vd3d3LnlvdXR1YmUtbm9jb29raWUuY29tL2VtYmVkLzNOb3g2U2pVNlpFP3JlbD0wIiB3aWR0aD0iNTIwIiBoZWlnaHQ9IjI5MyIgZnJhbWVib3JkZXI9IjAiIGFsbG93ZnVsbHNjcmVlbj0iYWxsb3dmdWxsc2NyZWVuIj48L2lmcmFtZT4=
    ->

     

    second comparison | Two hydrogen boosters

    Link to the article

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Lourdes generator for antioxidant hydrogen water | in comparison hydrogen booster from Paino

    Hey Yasin, in the appendix Another thing I found, another supplier from Korea that deals with hydrogen water. They also offer a Lourdes generator, but not the same as the competition... it would actually be interesting to take that up. But take a look for yourself and see if it's something that's right for you or for the Aquacentrum. What do you make of it? Best regards, Maxim

    Reply Yasin Akgün | to the question whether the Lourdes generator is not recommended for producing hydrogen water

    Dear Maxim, thank you very much for your question.

    My technical and subjective counterarguments to the Lourdes Generator HS 71 and Lourdes HS 81, which we even offer ourselves, would be:

    • The Lourdes hydrogen water generator has a water tank that is too large. You have to wait 30 minutes until you have acceptable levels of molecularly dissolved hydrogen gas in the water of 1200 ppb (Parts Per Billion) than 1,2 ppm (Parts Per Million)
    • This maximum achievable value, measured with the H2-Blue Kit® titration drops to determine molecularly dissolved hydrogen is 1,2 ppm. The reason for this is:
    • It cannot carry out electrolysis under pressure, which means that there is an upper limit of 1,2 ppm of molecularly dissolved hydrogen; more is simply not possible, for technical reasons.
    However, it also has advantages, which is why we use it Lourdes hydrogen water generator now also at a special price of €1197,00 added to the range.

    Alternatives to the Lourdes antioxidant hydrogen water generator

    I have to mention that the purchase price of the hydrogen-water generators does not have to be that expensive, as the technology is by far the same as the technology that has been in use in practice for over 20 years now Flow-through water ionizer is inferior: The “hydrogen boosters” including the Lourdes generator and similar devices have much smaller electrodes, a very small membrane area, are kept very simple overall, and are typically battery-operated. The following are the hydrogen boosters that we have now tested in practice with our customers and are particularly recommended for: I don't know which one to find better:

    Our four available, partly battery-operated hydrogen generators to produce your own hydrogen water

    We have other SPE-based hydrogen generators as test products. If necessary, we can also send these to you as a comparison product together with one of the products we recommend and you can make your own experiences and tests with them H2-Blue Kit® titration drops. Please contact us about this.

    Test video | Hydrogen-water generators in comparison | Make hydrogen water yourself

    <!--
    YouTube

    By downloading the video you accept the privacy policy of YouTube.
    Read more

    Load video

    PGlmcmFtZSBsb2FkaW5nPSJsYXp5IiBzcmM9Imh0dHBzOi8vd3d3LnlvdXR1YmUtbm9jb29raWUuY29tL2VtYmVkL3R3RXlZT3cxbGxRIiB3aWR0aD0iNTIwIiBoZWlnaHQ9IjI5MyIgZnJhbWVib3JkZXI9IjAiIGFsbG93ZnVsbHNjcmVlbj0iYWxsb3dmdWxsc2NyZWVuIiBkYXRhLW1jZS1mcmFnbWVudD0iMSI+PC9pZnJhbWU+
    ->

     

    Asenbaum | testing through H2 Blue Kit® titration method

    Lourdes hydrogen water generator - analysis by KH Asenbaum 700

    Comment Lourdes Generator

    Result with 1 liter and 15 minutes of operation with tap water Munich:

    > Hydrogen concentration 1,0 ppm measured with H2 blue Kit titration drops

    Comment from Karl Heinz Asenbaum:

    Apart from the name, the Lourdes hydrogen generator has nothing to do with the source in the Catholic pilgrimage site, because it has nothing to do with hydrogen.

    The hydrogen bubbles created within it are powerful. They are prevented from gassing out of the water by a floating plastic disc. However, unlike hydrogen boosters, no hydrogen pressure is built up. As always, I measure with an enrichment time of 15 minutes because within this period the hydrogen dissolves well even in harder water. Let's see the result measured with H2 Blue Kit® titration drops in time lapse.The eleventh drop no longer decolorizes, so we achieved a hydrogen concentration of 1,0 ppm. Since we have one liter of water here, this corresponds to a dose of 1 mg. This is definitely well above the recommended threshold of 0,5 milligrams and is therefore acceptable.

    Link to the post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    How does the HRW generator tumbler from Solco® compare to the hydrogen booster?

    Tumbler from Solco - hydrogen water with PEM water cell

    Comparing the Solco® Tumbler Hydrogen Water Bottle, Battery Operated vs AquaVolta® hydrogen booster

    The “Tumbler” from the Korean company Solco®, which sells for just under €400 in Germany, has a seemingly similar design to that AquaVolta® hydrogen booster.

    However, the crucial component missing is a condensation water pressure tank into which the oxygen to be removed during PEM electrolysis is removed.

    Instead, the oxygen vapor escapes through a tiny hole in the base. The result of this cheap construction can be seen in the measured values:

    Even in terms of redox potential, the “tumbler” is far behind the AquaVolta® hydrogen booster after 2 x 5 minutes of production time, although the amount of hydrogen water produced by it in the unpressurized EVIAN bottle is 800 ml, twice as large as the 400 ml in the tumbler .

    It stands (-) 447 mV to (-) 294 mV for the AquaVolta® hydrogen booster.

    The measurement with the H2 blue® kit also shows a clear superiority of the AquaVolta® hydrogen booster.

    Solco® Tumbler after 10 minutes: 0,8 ppm AquaVolta® Hydrogen Booster after 10 minutes: 1,2 ppm

    Link this post | Link to the post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Question about the leak stopper | Received by email on August 9.8.2016, XNUMX from Peter Z.

     

    Hello Mr. Akgün!

    Thank you for the quick delivery of the Genesis Platinum.

    I found a leak stop in the package.

    Can you tell me where to mount it?

    Vg,

    Peter Z.

    Leak stopper for water filters

    Answer from Yasin Akgün

    Good morning Mr. Z.,

    Thanks for the feedback. It's nice that he EOS Genesis arrived the next day.

    The leak stopper is installed after the T-piece at the bottom of the cabinet floor, where water would flow. The paint stopper would then become saturated; it has a sponge element at the bottom.

    And then it would mechanically shut off the supply and it would mechanically shut off the water supply.

    There is a replacement sponge element included in the module in case it accidentally gets wet and the flow is interrupted.

    But the leakage protection module also reduces the water flow at the same time. If you have a low flow, the Leak Stopper is not recommended.

    In addition, in the entire time of the Aquacentrum and the many devices installed, with and without our help, nothing serious has ever happened. In addition, if something were to leak, it would more likely be leaking in the device.

    This means that you would notice it during ongoing operations and contact me accordingly.

    I have to mention that this is with them EOS devices, now in over 7 years there have never been any leaks.

    This can happen with other brands.

    Hope this helps

    All the best from Munich

    Yours, Yasin Akgün

    Link to the post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    It has rarely been necessary to reset the AquaVolta® EOS Touch

    The AquaVolta® EOS Touch had to be reset a few very few times.

    The error manifests itself in the fact that the touch controls do not respond or only respond to a limited extent. This case mostly happened after receiving the water ionizer. And it normally doesn't happen again during operation.

    If you ever notice that a reset could be a solution, we ask you to follow the instructions in the picture on the right.

     

    Step-by-step procedure to reset the EOS Touch water ionizer

    1. First turn off the device using the main switch at the bottom of the device and wait 10 seconds.
    2. Now touch and hold the touch display at the bottom right corner with your little finger and switch on the EOS Touch. While you continue to keep your finger touching the bottom corner, turn the device back on using the main switch. It is important that you press and hold as far as you can into the corner, preferably with your little finger. After about 10 seconds you can remove your finger again.
    3. A + symbol should now appear in the top left corner. If that doesn't happen, try steps 1 and 2 again
    4. Press and hold the plus (+) symbol that appears and keep it pressed until a plus symbol appears again in the lower right corner.
    5. Also press and hold the newly appeared plus (+) symbol
    6. When the screen returns to normal mode, you can check the touch button functions and enjoy and enjoy the alkaline ionized hydrogen water with the usual, delicious taste.

    Aquavolta EOS Touch Reset Reset

     

    Towards the end of the video: Reset EOS Touch 201 - if there are problems with the touch display

    All AquaVolta® EOS water ionizers are indestructible - even after years

    I have now spoken several times with customers who have been using an EOS water ionizer, then known as the Bionlite Platinion water ionizer, for over 7 years.
    All water ionizers were still fully functional. There was a problem with two devices, but it had more to do with rust sediments in the tap water due to the incoming water.

    A series many years ago had a program error: If the filter was used until 0 liters were in the display, you could not reset the filter even after replacing the filter. The solution is to replace the display module, which was done very quickly. I found out about this from a sales partner at the time, who was also able to confirm to me that apart from one small program error in a single series, there were no defects so far.

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Ask if we Kangen Enagic K8 tested and how it compares to the ECA Plus Water Tractor

    Dear Yasin,

    I'm looking for a water ionizer and got one at home yesterday K8 Kangen tried machine. Since the price seemed very high to me, I researched on the Internet and found Aquacentrum... and watched practically all the videos 😉 First of all, thank you for your professionalism and enthusiasm!

    As for the questions… Have you ever K8 Kangen tested? If yes, what do you think about it?

    At the presentation of ECA Tractor you talk about ECA technology as something special that previously only Langen had water for. Can you please explain to me what it means to have a device that has ECA technology?
    I live in Italy, if I order something from Aquacentrum and have problems, who should I contact?

    Kind regards Irene*

    Liebe Irene,

    Thank you for your email query, which I would be happy to answer.

    I haven't tried the Kangen K8 water ionizer yet, but I've already followed it on YouTube videos.

    Unfortunately, the Japanese still haven't learned from modern water ionizer models because they still have:

    • Unfortunately there is no display of the current flow. This is essential because the faster the water flows through the (Kangen) water ionizer, the weaker the end result will be
    • Insufficient protection against calcification of the electrodes: Kangen itself recommends decalcifying Kangen water ionizers every 2 weeks if the tap water is hard or very hard. What happens if you don't decalcify regularly? The values ​​decrease until no more alkaline water is produced. Modern water ionizers from Korea do not have this disease or cause it. Descaling only needs to be carried out after several months or sometimes years.
    • No sensible decalcification concept. This time they have installed a pump etc., but a concentrated citric acid solution is then sent through drop by drop. It's much easier with a pump and citric acid and then in the circuit. This works with every water ionizer, including all Kangen systems. More on this page: www.aquacentrum.de/ioniservertrag/
    • And then of course the price because of the network marketing system behind Kangen sales. This doesn’t make a good impression on the other water ionizer brands. Anything that costs over 2500 euros is overpriced.

    To the ECA Plus Water Tractor | All in one water ionizer

    In our opinion, this is currently the most modern and versatile water ionizer on the market. It has two different water cells, one for each different type of water. One with 7 electrodes for the salted, strong anolyte and catolyte (pH 2 to pH 12,5).

    The ECA Plus also has a flow indicator, a flow control knob, and a flow sensor that automatically switches the device off if there is no water flow. The running times of both filters are also shown in liter accuracy on the display. The brine dosing pump is an electric dosing pump, and not a mechanical Venturi pump like the Kangen Enagic water ionizers, which can easily become clogged with small pieces of limescale and should also be descaled.

    You can not only install the AquaVolta® ECA Plus Water Tractor on the tap using the small chrome-plated metal diverter valve, but also firmly attach it to the cold water pipe using the included T-piece. This is only possible to a limited extent with the Kangen Enagic water ionizers if you have the parts, and it is still very user-unfriendly.

    More about installation on this website: www.aquacentrum.de/installation-wasserfilter-wasserioniser-untertischioniserer/

    I hope this information helps you. Looking forward to more questions, love, Yasin

    Descaling Kangen Enagic Leveluk SD 501 and Kangen K8

    Kangen Enagic structural system

    Overview | AquaVolta® ECA Plus Water Tractor

    For therapists | AquaVolta® ECA Plus Water Tractor

    Email response from Irene about maintenance Italy the next day

    Thanks Yasin,
    very helpful!
    But I haven't found the answer to the question about possible maintenance in Italy.

    Irene*

    Yasin Akgün's answer to the question, Maintenance Italia

    Hello dear Irene,
    Thank you for your quick response.
    Basically, our systems should almost never break down.
    The EOS systems never break:
    www.aquacentrum.de/shop/eos-revelation-ll-untertisch-wasserioniser/
    www.aquacentrum.de/shop/eos-genesis-wasserioniser/

    If you want to work with adding salt, which is usually not done in practice because it is a hassle, then use the ECA Plus.
    Of course it can break down.

    But only when it's just arrived, when it's running, then it's running...
    But in case of a defect, you would send it to us and we would repair it immediately and send it back to you. We will reimburse shipping. You would also have to do it when we have an Italian partner at some point, think next year. Then go to Italy.

    But as a rule, if you descale every few months, nothing should happen.

    Kind regards
    Age
    Link to the post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Experience report about functional water from the ECA Plus multifunctional water purifier

    Hello Mr Akgün,
    Now I'm in a dilemma! All pH values ​​are now perfect! But now I have my wives (wife and daughters) breathing down my neck because when I use the brine water there is a strong smell of chemicals in the kitchen, despite the airing! I really don't know what to do now!?

    Best regards, Jeans

    Hello Mr. B.,

    That's hypochlorite what you smell. This is the main disinfectant, which is created by adding salt and subsequent ionization. More on that in this one Document on hypochlorite as a disinfectant.

    They always produce the saline water in 2 liter quantities or bottled in 1 liter bottles. That's enough for several weeks.

    So produce in bursts, not a little bit every day.

    You mainly need the anolyte, i.e. the highly disinfecting water with pH 2,2, and this can be stored for several weeks without any problems, even if air gets into the bottle because you keep opening it and using it.

    Get a spray bottle to apply to your skin or use as a deodorant or something similar.

    Hope this solves the dilemma

    All the best

    Yours, Yasin Akgün

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Info about Tritan – the material of our plastic drinking bottles

    Plastic is repeatedly criticized and there is a lot of confusing information and rumors circulating regarding its use in drinking bottles. Much of this is justified, but there are differences: Not all plastic is the same!

    All drinking bottles currently offered by Aquacentrum are made of “Tritan”, a plastic made by the Eastman Chemical Company produced and classified as particularly safe.

    An Eastman website contains specific information about “Tritan” that is important in this context:

    • “Tritan” has been tested worldwide and independently for several years with regard to food contact.
    • “Tritan” is free of BPA (Bisphenol A) and free of other bisphenols (e.g. BPS).
    • “Tritan” has no estrogenic or androgenic activity.
    • “Tritan” has the recycling code “7”, which generally applies to all plastics that do not have their own recycling code. This does not imply any evaluation of the material, although this is occasionally falsely claimed.

    From the current perspective, “Tritan” is an excellent alternative to heavy and fragile glass bottles. Due to its resistance, a long service life is possible, which contributes to an acceptable environmental balance.

    Further information – in English – can be found at Eastman:
    www.eastman.com/Markets/Tritan_Safe/Pages/Overview.aspx

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Installation and maintenance EOS Touch water ionizer


    Unpacking | Install | Show off | EOS Touch

    In this video we really go into almost all the topics you should consider when buying a water ionizer:

    • Unpacking water ionizer
    • included supply
    • different ways to install the device:
    • At the tap or
    • Fixed with a T-piece or 1/4” hose connector cap)
    • Filter change
    • Descaling the water ionizer
    • etc…

    The showcase example in this video is our best device, the AquaVolta EOS Touch, the more expensive brother of the AquaVolta EOS Genesis.
    On On this page you will find a longer edition of this training video.

     

    Link this post | Link to the post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Email question to Yasin Akgün about Blue 700 HRW hydrogen water

    Hello Mr Akgün,

    I vacillate between that Aquacentrum Blue 700® Bottle | Hydrogen Water Maker (HRW) and the Water ionizer PTV-KL | Aquaphaser. From what I read, the Aquacentrum only makes water slightly more alkaline, but enriches it with hydrogen and oxygen. The Aquaphaser has the advantage that it can make alkaline water with a pH of over 10 and also acidic water for disinfection.

    Now I'm a bit overwhelmed and don't know which will give me the greater health benefits. I would therefore like to ask you which device you would recommend to me.

    The Aquaphaser I would like it without the silver colloid. Would this have a financial advantage for me? 😉 My question about a quantity discount still remains if I decided on the Bio-Mat Professional and a water ionizer. Now I am very happy about your feedback 🙂 Best regards, Birgit S.

    Email response from Yasin Akgün about the Blue 700 HRW hydrogen water generator

    Dear Ms. S.,

    Thank you very much for your question, which I would like to answer as follows:

    I would clearly prefer the Blue 700 hydrogen bottle because it doesn't need a power plug because it runs on a battery that is recharged after about 40 uses via a USB power adapter, just like your smartphone. This means you can take the Blue 700 with you anywhere and produce fresh hydrogen-containing water from any water.

    Of course, the best option is filtered water from an Aquaphor filter, which, unlike other activated carbon filters, also filters out heavy metals, iron and manganese. In this case it is best to use the can filter, as it also works without a connection: www.aquacentrum.de/shop/kannenfilter-aquaphor-prestige/ . He's already in Set for the Blue 700 included free of charge.

    But the Modern Filter is also a good option:
    www.aquacentrum.de/shop/aquaphor-modern/

    The Blue 700 increases in contrast to that Top ionizer Aquator Mini | Aquaphaser | PTV-KL hardly affects the pH value of the water, but it stores up to 700 ppb (0,7 ppm) of hydrogen. The Aquaphaser can produce up to 15 ppb when operated for more than 1600 minutes because it pushes the oxygen produced during electrolysis into the acidic water. However, it heats the water significantly due to the high voltage and current used, so that the hydrogen evaporates more easily. Above all, however, the much easier handling of the Blue 700 speaks in favor of this solution.

    You don't have to ionize 1,4 liters each time and then let the diaphragm dry, but you only produce as much fresh as you want to drink (up to 0,5 l). The Blue 700 works with a capacity of 0,1 liters! In the Blue 700, the water stays as cool as you filled it with a production time of 2 – 8 minutes.

    Why hydrogen is more important than the pH value of the water cannot be quickly explained, but we have numerous videos about it, such as the new one Baby milk video by Karl Heinz Asenbaum or the interview www.querdenken.tv (video right)

    The Aquaphaser is actually a laboratory device and its basic design dates back to the Uzbek beginnings of Russian active water research in the 1980s. It is primarily used to produce functional waters such as catholyte and anolyte, which are produced by adding salt. This is the only way to create their disinfecting or emulsifying character. It is a mistake to believe that you can do this with the Aquaphaser simultaneously Make alkaline water for drinking and acidic water for disinfection!

    Without adding salt, the anolyte is not germicidal and the catholyte is not fat-dissolving. You are not allowed to drink either. So you can only make either acidic and basic water or anolyte and catholyte. The electrodes are also not platinum-coated like those of the Blue 700, the diaphragm is made of a kind of greaseproof paper and has to be replaced quite often. The Blue 700's electrodes do not calcify because it does not have a diaphragm and leaves the oxygen in the water.

    querdenken.tv Interview | Karl Heinz Asenbaum and Yasin Akgün

    Important installation video and maintenance water ionizer

    Conversation in Dubai | Karl Heinz Asenbaum and Yasin Akgün

    Back to your second question:

    Nevertheless, I recommend a flow-through water ionizer, as you can then tap off freshly alkaline, hydrogen-containing water with the desired pH value at any time.

    I have that for you AquaVolta Basic recommended because it is very small, but not too weak. It is suitable for water with a hardness of up to dH 18. It is also very well protected against limescale.  www.aquacentrum.de/shop/aquavolta-basic-wasserioniser/

    Together with the Biomat Professional from Richway I can provide you with the entire order, AquaVolta Basic and offer 10% discount on your order. Of course you enjoy ours Test and satisfaction guarantee.

    Hope this helps you.

    All the best

    Yours, Yasin Akgün

    Link this post | Link to the post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Hallo,
    I bought the Blue water 700, at first I was very impressed by the delicious water. Recently, the previously filtered water suddenly smells very strongly of chlorine and tastes unpleasant. I even threw away the last of the water. Where is the problem?
    Kind regards
    Andrew B

    Hello Mr. B.

    Thanks for your question. It seems that the chloride content in your water has changed, it happens, the tap water depends on many factors and rainfall.

    You could reinsert the mineral ring provided, which should catalytically convert the hypochlorite created by the ionization from the chloride (salt) ion back into chloride, i.e. salt.

    In your case, the hypochlorite is a natural disinfectant, which is created from the chloride ion (Cl-) through electrolysis. It is not poisonous and can be drunk. In terms of taste, your very sensitive taste organ, your tongue, can immediately detect the chlorine smell of hypochlorite, because water normally doesn't taste like anything.

    In your case, without the mineral ring, your water is, so to speak, safely disinfected because the disinfectant, the hypochlorite, has not yet been used up. So it's not necessarily a bad thing...

    These are the issues when you produce alkaline and acidic water without a membrane. Hence the special feature of flow ionizers, which separate alkaline and acidic water.

    I hope I was able to help you, I look forward to hearing back. All the best, Yasin Akgün

    Link to FAQ post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    charging cable Blue 700 Hydrogen-Oxygen Water Generators is defective – Not the Blue 700 > See below

     

    Aquacentrum Blue 700 Hydrogen Water Maker HRW-large

    Dear Mr. Akgün,

    we are back from our trip. A short feedback about the bluexnumx... 

    After using up our water reserves from “Lydia”, our home device, we wanted to treat water with the Blue5 for the first time after about 700 days.

    Even though it was fully charged before the trip, the device didn't say a peep. So we charged it again at the next possible power connection. Surprisingly, after a long charging time, the green light came on, contrary to our experience at home. Then we enjoyed good ionized water and were happy about it.

    After 3 days and three double ionizations, the battery was already too weak on the 4th attempt.

    So it had to be recharged the next time the power was connected.

    This continued - whenever we wanted to use it after a break of a few days, the battery was too weak or completely empty and we had to wait until we had a power connection and then charge it, which was time-consuming. 

    That was a bit annoying and spoiled our joy, especially since we only go to a campsite every 3-4 days. The difference in water quality can really be tasted after ionization - a pleasure!

    This also amazed my brother, who we visited on the trip.

    He is professionally involved in the filtering and treatment of drinking water and privately researches how to obtain the best drinking water naturally (without electrical systems). 

    Conclusion: The Blue700 does a good job, but its battery is very unreliable.

    That's why we would really like to take advantage of your offer and exchange the device in the hope that it will work better with the next Blue700. Is that OK. if we just return and exchange the Blue700? The filter jug ​​doesn't cause any problems.

    Otherwise we will send the package back as received with all the trimmings and wait for a replacement…

    Best regards, Silke and Dirk T.

    Answer from Yasin Akgün with the solution: Charging cable may be defective

     

    Hello Mr. Tretow,

    I am very sorry about that.

    Has it happened a few times that you have used the included charger/cable?

    If you use another one, it will last almost forever, over 40 times.

    Will you test this and then we'll talk again?

    It would be better to send me an email straight away, then you could have used it. Sorry for that

    Otherwise just send it back, you would be the first

    Yours, Yasin Akgün

    Hello Mr Akgün,
    You were correct in your assumption.

    The Blue700 charger is defective. It was the only thing we took with us on the trip.
    The idea with the double USB is also very practical and the iPad and cell phone were always charged quickly with a 220V power connection... 

    With the charger from my mobile phone, the battery has now really done its promised job.

    The device visibly and tastelessly bubbles less hydrogen ions towards the end, but at least I have now tried out 44 operating units before recharging it again!
    So, we're not sending our Blue700 back to you and hope that it will continue to refine the water for us for a long time and reliably on our travels...
    Best regards, Dirk T.

    Link to the post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Do you notice a difference to normal tap or filtered water?

    Yes, you can taste a difference when you use the pre-filter, pitcher filter , or Modern table-top filter used. When it comes to the mineral depot itself, you can taste a difference depending on the water.

    Do you still need a water filter?

    Yes, like the airbag in the car, the water airbag at home or on the go, it is important. We're giving away the jug filter. 

     

    Does this device also filter the water?

    The mineral filter (mineral depot, called filter ring) breaks down at most chlorine and catalytically converts it into chloride ions (salt).

    The pre-filter (can filter or a modern table-top filter) filters out all conceivable pollutants, including heavy metal salts. The silver ions built into the filter medium are very effective against germination in the can filter insert. Silver ions are also used in the Modern Filter and all Aquaphor filters

    How long do the filter rings last? How much do the filter rings cost?

    2 months after the first contact with the water, due to the risk of bacteria, as it is not doped with silver. A ring costs 15 euros including VAT.

    Can you use the filter ring and mineral depot at the same time?

    There is only one filter ring or better name, mineral depot, mineral ring for short

     

    If the battery lasts for 40 uses, does it need to be recharged or replaced?

    The battery is then recharged using a mobile phone charging cable, which is included, and a power adapter is also included

    How much water can I produce in 2 months (mineral depot)? 3 or 4 liters per day? (180 or 240 liters or more?)

    As much as you want, the mineralization effect will wear off over time, which is not so bad. Personally, I prefer to work without the mineral depot, as the hydrogen can then be distributed much better. It is also a lot more visually appealing to see the many, many very fine bubbles. The mineral deposit tends to disrupt the distribution and appearance.

    Is the mineral depot “used up” exactly after 2 months? Or why does it last 2 months?

    Because of the risk of bacteria, as always with water issues, if silver is not used in the filter.

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    General questions to ask before purchasing a water ionizer

     

    Good afternoon Mr. Akgün,

    I am interested in a water ionizer and have a few questions:

    -What is the difference between EOS Touch and Revelation?

    -After how many liters of water do you have to change the filter?

    -Do you have to clean the device regularly?

    -Is there 11,5 ph water to be able to wash clothes without detergent?

    -Is there 2,5 ph water for disinfection?

    -How complex is the installation if the water pipe is in the wall or bricked up?

    -What are the exact dimensions of the devices?

    Thank you and best regards

    MK

    Answer from Yasin Akgün

    Dear Ms. K.,
    I would be happy to answer your questions as follows:

    1. The AquaVolta® EOS Touch Can be installed on the tap or permanently with a T-piece. But it's always above the sink. This would be an almost identical device AquaVolta® EOS Genesis, which is a little cheaper because it doesn't have a touch control, which has actually proven to be an advantage for our older customers. See the first video to see how easy it is to use.
      The AquaVolta® EOS Revelation is one of the few water ionizers that can be installed under the sink counter. In the past, under-table ionizers were not highly recommended for various reasons, especially if the tap water was particularly hardy. Thanks to the unique automatic limescale protection of the EOS Revelation (pre- and post-cleaning with rinsing), it is currently one of our most purchased water ionizers with the lowest return rates of under 1%. That's why I have currently reduced it by 2070 euros to 400 euros.
    2. The water filters are changed approximately every 3000 and 6000 liters. If you include the wastewater, then there are 4500 and 9000 liters. As a general rule, with normal use, you could change the first filter once a year, and the second one early after 2 years at the latest. Activated carbon should not be in contact with water for too long, even if the displayed liter values ​​have not yet been exhausted.
    3. Descaling is necessary for every water ionizer; the more calcareous the water, the lower the flow and the higher the ionization level set, the more often. The better ones are rarer as well as the cheaper devices, which we hardly offer, except in our used water ionizer category. Below is the website with more videos: www.aquacentrum.de/ioniservertrag/
    4. The waters mentioned, concentrated anolyte and catholyte are only possible by adding salt. Then you would have to look into this ECA (electro chemically activated) capable water ionizer, but it is not submersible. www.aquacentrum.de/shop/aquavolta-eca-plus-wasserioniser/
    5. You definitely need a way to connect. The connection can also be on the other side of a wall, as long as you can feed the 6/1” hose through a 4mm hole, everything is possible. Even over several meters. You should just show me what the connection looks like, preferably with a photo.
    6. Typically, our best-selling water ionizers, the EOS water ionizers, have the following dimensions: 34x34x15 cm. With the EOS Revelation, the control tap is added as a separate tap.

    I hope my answers help you. I look forward to further questions. Greetings from Munich
    Yours, Yasin Akgün

    Easy operation of the AquaVolta® EOS Genesis

     

    Brief information about AquaVolta® EOS Revelation II

     

    Descaling water ionizer | introduction

     

    Brief information about AquaVolta® EOS Revelation II

    Link to the article

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    > Typical questions and answers (also via email)

    FAQ answer to: “The nightmare with the technical alkaline water ionized water Dr. med. Dr. ing. Petrov | QS24”

    Subject: Inquiry about building lime in the water

    Good day.

    After watching countless videos, I'm totally unsettled.

    What do you say about the fact that building lime is the ionizer in water?

    Here is the video: (see video)

    Please enlighten me.

    Best regards, Thomas A.

    The nightmare with technical alkaline water - ionized water | dr medical dr eng. Petrov | QS24


    Is calcium in water good or bad for the organism?

    Hello Mr. A.,

    You have to live with your uncertainty mentioned below in the world of the Internet. It's like the big state library that you go to for the first time as a first-year student, and yet it is fundamentally different because no one manages this body of knowledge there, especially no knowledgeable librarians. Since I have been dealing with the topic of ionized water for 18 years now, I ask your forgiveness for no longer watching videos from private TV channels where any idiot can buy airtime for cash. I was a victim of such a paid interview invitation years ago and I regret it very much. The channel was called “Querdenker-TV” and you can imagine that I was in the wrong place. Because I studied thinking at university and not lateral thinking.

    You can find everything you need to know about “building lime” here: https://de.wikipedia.org/wiki/Baukalk

    But the whole thing has nothing to do with ionized water. A building would have to have been under water for a very, very long time for some form of building lime to dissolve in it. And if it does, over time, that would be very good.
    The calcium ions, which are extremely useful for us, appear in the water and the carbonic acid ions, which evaporate as CO2 gas when heated. In the basic part of the ionized water from an ionizer, the carbon dioxide problem is already solved by proton removal. This means we even get more calcium ions into the water, which our bones and nerves are very happy about because they are very easily bioavailable in this form.

    The most important advantage of getting the most frequently needed calcium ions from water and not from food is the calories. The greatest density of calcium in the diet can be found in fatty cheeses. It makes us fat, and when we have a deficit, which can easily happen with an acidic lifestyle, we constantly have an appetite for foods that make us fat.

    Calcium ions from drinking water are highly wanted (bioavailable)) by our body. But if we bite into the fatty cheese too much, i.e. consume a lot of fat at the same time as the calcium ion, the excess fat grabs a calcium ion and arteriosclerosis can develop. That's why alkaline activated water separates the absorption of calcium ions from the absorption of calcium through high-calorie food by delivering these ions pure. Anything other than lime is really “cheese”.

    This would basically answer your question. But all the nonsense about water that these people spread on these “quantum” and “lateral thinking” Kaufmich TV channels primarily serves to undermine the new science of hydrogen water. People fantasize about Emoto ice crystals and their beautiful shapes, which are said to have a “cellular effect”. Have you ever seen a living cell that was frozen? Even if we suck an ice cube, it is only absorbed when it has reached 37 degrees C, meaning it can flow again and therefore has a completely different structure. “Hex” agonal water is mainly found at the poles, and it is not drinking water, but human stupidity.

    What is certain today is that hydrogen-rich water in non-frozen form has a health benefit because it is a very effective form of delivering hydrogen gas to parts of the body that require therapy. The same applies with less evidence for hydrogen inhalation, infusion and topical H2 gas applications.

    The benefit of raising the pH value of water, as water ionizers strive for, is rather weakly scientifically proven compared to a high hydrogen concentration. Nevertheless, there is a positive experience with it that has been proven for almost 90 years, which I personally also share.

    Kind regards /with kind regards
    Karl Heinz Asenbaum
    Georgenstr. 110 / 80798 Munich
    Phone: +49 89 230282 67 Mobile: +49 (0) 15 2345 567 94
    Fax box: +49 (0) 321 22 11 11 00

    All important links:
    https://aquavolta.eu/wp-content/uploads/2021/06/Linkliste-Asenbaum-aktuell.pdf
    My book: Electro-Activated Water: https://aquavolta.eu/wp-content/uploads/2021/06/Elektroaktiviertes_Wasser_Asenbaum_2019_10te_Auflage_Ebook.pdf

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Increased calcium content in alkaline active water - The nightmare with technical alkaline water - Ionized water Dr. med. Dr. Ing. Petrov

    Dear Mr. Asenbaum,

    I watch your great videos with excitement all the time and then by chance I come across this video that practically says that this technology calcifies people internally.

    Now he's not a nobody, but a respected scientist and I'm wondering whether they haven't overlooked something regarding the lime. 

    I really hope you find time for an answer! 

    Best regards

    Harald K.

    https://www.youtube.com/watch?v=z3y5OaCrji4

    The nightmare with technical alkaline water - ionized water | dr medical dr eng. Petrov | QS24


    Dear Mr. K,

    This is a common question and I have commented on it several times. For example in the “Service Handbook for People”. And under the FAQs about calcium, Roberts, Töth in my book “Electroactivated Water”. You can download both books as PDFs for free via the link list. https://aquavolta.eu/wp-content/uploads/2021/06/Linkliste-Asenbaum-aktuell.pdf

    Or here in the Aquacentrum FAQ collection I wrote the following:

    Increased calcium content in alkaline activated water?

    Eberhard P.: In your video lecture “The Redox Revolution” you talk about an increased calcium content in alkaline activated water. You can also see this on the bottles when a whitish limescale separates after a while. I really believe in drinking activated water, but isn't there a risk of hardening of the arteries if I drink it constantly?

    • Iron is good for the blood, but you can also use it to cast cannons and wage wars. And it's the same with calcium. You can build houses with it or prisons. The police are not to blame for the crime. The body contains the miracle weapon calcium: It is a buttery-soft alkaline earth metal, but it combines so readily with acids that it is practically not found in its pure form.
    • Limestone (CaCO3 calcium carbonate), for example, is a compound of carbon dioxide with the alkaline earth metal. When carbonic acid rain seeps through limestone, it dissolves and releases, among other things, ionized calcium into the water. Incidentally, most of the limestone in our latitudes comes from the corals of the ancient seas. We don't need to buy coral calcium from the island of Okinawa. Coral calcium is already in our tap water! However, just because it comes from coral doesn't mean it's organic or even organic! Minerals are and will always remain inorganic by nature.
    • Ca ions, together with phosphorus ions, build our skeleton or regulate the signals from our nerves. Calcium ions are vital. Our body contains around 1 kg in its purest form. Calcium is the mineral we need most because you can't put furniture in a house without walls. That is why there is no upper limit in the Drinking Water Ordinance. If there is too little of it, the waterworks are obliged to add calcium.
    • Ca ions are also our most powerful reserve force against the army of acids. They save the vital alkaline body environment when the foot soldiers of the much smaller sodium and magnesium soldiers are exhausted. In order to eliminate excess acids, they capture them with their electrical ionic force. But what to do with the many prisoners when the capacity of the prison camps is no longer sufficient due to the years-long war against acidification? Every organism regulates this differently.
    • Fatty acids and amino acids captured by calcium can narrow vessels (arteriosclerosis) or become growths (e.g. calcified shoulder). Excess protein and fatty acids in the blood are to blame. In an emergency, it can only be eliminated using buffer substances. The buffer substance present in the largest amount is calcium. Therefore, the consequences of hyperacidity are most often perceived as calcium “slags”.
    • Uric acid trapped by calcium can promote stone formation. The culprit is the excretion of uric acid, which is usually prevented by alcohol abuse or certain antihypertensive drugs, not the Ca.
    • Only when the bound acids are removed does the Ca become a free ion again and can be used again in an aqueous solution as a miracle weapon for the benefit of the body. For this purpose, among other things, 100 million people drink alkaline activated water.

    The GDr. I didn't know Petrov yet. His statement that calcium carbonate builds up around cells is more bizarre than original and lacks any scientific evidence to back it up. However, I already know the station. One of the comments asks that they invite me. But they won't do that because then I would have to bring a four-figure amount with me. They live off pseudo-scientists who buy “interviews” that are actually PR films. The station even sells some of the products advertised. Dipl. Ing. Yasin Akgün, had already bought some airtime there and regretted it very much because in such an environment you quickly get a reputation as a “tinfoil hat”. That's why I wouldn't even go there for free. People look at me like that too. 

    Funny, the inventor of membrane electrolysis in 1802, which is still used today to separate acidic and alkaline water, was also called Petrow. The alkaline water issue is no longer important these days because the hydrogen component is much more important for health. That doesn't mean that if you have serious problems with acidity - and especially if you have arteriosclerosis - alkaline hydrogen water is the best option 

    Kind regards /with kind regards

    Karl Heinz Asenbaum

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Mr. Asenbaum How do you rate reverse osmosis systems from Hpreiss and Truu Water?

    Dear Mr. Asenbaum,

    I have been dealing with the topic of water for a long time out of personal interest.

    This email is simply to thank you for all your actions, your commitment, sharing your interview, preparing the topic, for example in the form of short videos, so that I can understand everything too.
    Thank you from the bottom of my heart for that.

    Now I'm not a professional like you, I just know that there are various cleaning systems out there, of which if you want to spend some money, the reverse osmosis process with subsequent swirling/activation if necessary is a good choice. That's the technology. There are many providers, some of which are probably very similar, but others offer rather inferior products.

    I find enrichment with hydrogen very exciting and have been able to learn a lot about it through your videos, among other things.
    I would be pleased if you could tell me - more as a water expert than as a representative of a specific brand - how you rate the products from hpreiss and truu water, although in my opinion truu does not currently offer a variant with hydrogen enrichment.

    (Oh...since you don't really live around the corner, I was hoping to be a little closer to the lots of interesting information you keep sharing by connecting via your Facebook page. So I had one for you Short message sent via Facebook/messenger. But I think you spread the information about water through other channels. Therefore the connection request may not seem appropriate.)

    Thank you very much for your help and your time.
    Sunny greetings from Düsseldorf
    Ulrike K.

    Dear Ms. K.,

    Thank you very much for your great praise and your questions. I recommend that you work through my link list in advance, as I can only go into it very briefly here. https://aquavolta.eu/wp-content/uploads/2021/06/Linkliste-Asenbaum-aktuell.pdf

    Reverse osmosis is the most complex filter process and removes both pollutants and useful dissolved substances such as minerals from the water. It only makes sense if the water contains pollutants that cannot be removed by the first 3 stages of a reverse osmosis system (sediment/activated carbon/ceramic filter). In Germany this is necessary in around 10% of cases. The osmosis membrane as the 4th filter stage then creates almost pure water, which does not meet any standard for drinking water because it has the property of filling up with anions and cations like a sponge and thereby demineralizing the body. As a result, people start eating more than is required in terms of calories to compensate for the missing minerals from water intake. Drinkers of pure osmosis water are therefore usually overweight. In my opinion, the fact that in areas where the natural water is almost as soft as osmosis water, more coronary diseases occur, especially in men, is not a direct effect of the water, but rather the urge for over-calorie nutrition that arises there.

    I therefore strongly advise against long-term drinking of reverse osmosis water that has not been re-mineralized.
    By activation I only mean the activation measured electrically in millivolts by dissolved hydrogen gas, which leads to a very low redox potential. Turbulence, on the other hand, has the exact opposite effect because it creates oxygen. i.e. high redox potential introduced into the water.
    The two never fit together.

    Hydrogen-rich water occurs naturally in a few healing springs, but is extremely rare and the hydrogen content is practically impossible to bottle, as hydrogen-rich water is very sensitive due to rapid degassing into the atmosphere. Therefore, over the last 17 years, while I have been working on this topic full-time, processes for increased enrichment and preservation of hydrogen water have been invented. Why hydrogen-rich water is the most interesting variant of drinking water treatment (besides filtering) can be found in detail in my book “Electroactivated Water – from healing water from the socket to hydrogen therapy” mentioned in the links.

    I have been involved in some new techniques for production and preservation in the form of the “Aquavolta” brand I developed, which is sold worldwide through licensing partners such as www.aquacentrum.de. Please forgive me if I generally give cautious assessments of other brands or distribution systems. The colleagues in question certainly put a lot of effort into their products. However, I am usually one of the first to find out about new technologies, and in fact we always develop a new Aquavolta product as soon as a sensible technological leap in water treatment becomes apparent. However, the two systems you asked about, hpreiss and truu, are actually neither new nor interesting to me.
    hpreiss has 2 hydrogen devices on its website: The Hydron, a Koranic device with which I was able to measure a hydrogen concentration of 1300 ppb maximum. Today's systems achieve significantly more than 2000 ppm. As well as the Hydrogen Mini, which I haven't been able to test myself yet. However, hpreiss states the following: “Concentration of dissolved hydrogen ions: 700 – 1100 ppb”. From today's perspective, this is downright ridiculous for a hydrogen booster. Apart from the fact that the company apparently has no idea about the technical terminology: Because “hydrogen ions” are H+ ions. Chemically, they have about as much to do with hydrogen gas as the name “Gustav” has to do with the word “inn”.

    The scope of truu products is not described in more detail on the website. It seems to be pure filters. In any case, it is a multivel marketing structure sales, which explains the prices of over €3000. I think these prices are misleading customers. As with the structural distribution of the Kangen devices, which are also far overpriced, there are indications of a connection with Scientology organizations. https://www.swr.de/swraktuell/baden-wuerttemberg/karlsruhe/truu-wasserfilter-scientology-100.html

    Kind regards /with kind regards
    Karl Heinz Asenbaum

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Ionizers: “Good luck with gout…”? Could also be a shot in the foot

    Dear Mr. Asenbaum,

    I would like to contact you again with a question. I intend to recommend the EOS Genesis water ionizer to friends, which I have had for 2 years and enjoy using.

    I recently came across a note from Roland Bitz from a phone call I had with him in 2012: Provitec Drinking Water Treatment Technology 94575 Windorf.

    He speaks against ionization:

    • Ionizers: “Good luck with gout…”? It can also be a shot in the foot: the alkaline water that is produced ultimately has nothing to do with deacidification, but rather the pH value is raised.

    Alkaline water is about neutralizing the acids in the body. But I can't rinse acid out, you have to neutralize it and you do that with minerals: calcium, magnesium (base powder). Positive and negative ions are separated in the ionizer. Water is split into hydrogen ions and oxygen ions. This increases the hydrogen content and thus the pH value, which says nothing other than “hydrogen potency”. But the amount of minerals is not increased, which means that the conductance remains the same - only the display is higher. Completely stupid for deacidifying the body. It's like writing "100 g" instead of "1000 g" on a package of food. That's why there's no more in the pack. The display has nothing to do with the pH value that we use to neutralize acid in the body. This is only possible with minerals. The mineral value remains unchanged with ionizers. How are they supposed to increase if I don't add any? Theoretically, it would be possible to separate water into one with many minerals and one with few.

    If you could help me briefly, I would be grateful.

    Kind regards – Father Stefan L.

    Dear Father L., 

    Only the last sentence is correct. “Theoretically, it would be possible to separate water into one with many minerals and one with few.” That's exactly what a water ionizer like the Aquavolta EOS Genesis does.

    And it doesn't just do that, it also separates hydrogen ion-rich H+ water from hydroxide ion-rich OH- water, i.e. acidic from basic. So it's very clear that you can use it to neutralize acids. However, you should leave the church in the village and not, like some sellers, claim that this will prevent the consequences of hyperacidity such as gout if you do nothing else and consume meat and beer every day. In any case, it’s not “idiotic”, because bases are bases and neutralize acids. However, to neutralize a glass of Coca Cola (pH2,7) to pH 7, you actually need 32 glasses of alkaline water. (see my book, which can be downloaded below, p. 14)

    The gentleman who writes this seems to have no idea what an ionizer does. Because “oxygen ions” have nothing to do with it and do not appear in it. And although the “hydrogen content” is increased during electrolysis in alkaline water, that is not what increases the pH value. In fact, it is hydrogen ions (H+) that are drawn into the acidic water, which therefore has a lower pH value.

    Much more important with ionized water than its low buffered basic pH value is the enrichment with hydrogen (as gas!! H2). This ensures a reduction in the redox potential by up to 1000 mV. See my book from page 59.

    Water ionizers are now surpassed by hydrogen generators. However, these usually do not increase the pH value. Unless you ensure this through new mineral ceramics, as is the case with our latest development. Since these electricity-free devices have been available whose water tastes absolutely convincing, classic water ionizers have hardly been sold anymore. Find out more here. https://www.aquacentrum.de/produkt/aquavolta-h2-rocket-fuer-minerade-tabs-erhoehung-ph-wert-und-h2-gas-anreicherung/

    Kind regards /with kind regards

    Karl Heinz Asenbaum

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Good morning Yasin

    I had a very good appointment at your house, great advice.

    Thanks for the Nano, I use it every day.

    Would a phone call with you be possible?

    Also like WhatsApp or Telegram, it should be easier and cheaper from abroad.

    Questions about the Nano H2 Booster and general questions about Rocket, health, water hardness, Truu-Wasserweik reverse osmosis system

    Nano

    – no matter what water according to the instructions

    – what water would you put in the Nano for the optimal output

    – can you change the PH value with the Nano?

    – how would you incorporate the Nano into your everyday life, at what times…distances from meals, etc.

    – Customer asked if you can give Truu – Wasserweik water in the Nano

    Which water system?

    – in the case of cancer, what water would you use
    – generally, which water for illnesses

    – Sang Wang Interview PH value 11 for serious illnesses, can you say that?

    – does it make sense to incorporate different waters into everyday life, e.g. Truu and Kangen PH

    – PH value especially for cleaning fresh foods such as apples, tomatoes etc…. allow to soak
    – the osmosis faction says that you can also soak it in osmosis water and you will have less stress later
    in fruits/vegetables

    So far I have drawn the following conclusion.

    – do not drink empty water such as osmosis in the long term

    – alkaline active water with increased PH value and as much as possible hydrogen over 2 ppm

    Rocket immediately comes to mind…. but how does it compare to your electrolysis systems?

    We have dH 23 – 24 here locally.

    Kind regards MartinAquavolta Nano Hydrogen Booster H2-Water 1200

    Aquavolta® OSMINION 100 GPD incl. H2 Rocket reverse osmosis system incl. pH value increase

    Hello dear Martin,
    Thank you for your email and your kind words about Marko, that is motivating for me. Also thank you for your questions, which I have also put online as FAQs:

    Yes, please call: +491792166231
    Both work, Telegram and Whatsapp

    I'll answer your questions:

    Aquavolta® Nano portable hydrogen water generator:

    Yes, no matter what water
    I wouldn't use osmosis water because minerals leave the H2 in the water longer
    No pH change

    1 bottle/day per person at least, maximum as much water is drunk, i.e. all water, there is no max

    The trick to optimal use and to obtain particularly high hydrogen values ​​in the treated water:

    1. Fill with water almost to the top, just NOT touching the lid, close it and start the electrolysis.
    2. After 5 minutes of total running time, over 3 ppm of molecularly dissolved hydrogen can be expected. Later, let it run for another 5 minutes to target particularly high values.
    3. Please let it “ripen” for at least 10, preferably 20 minutes, i.e. leave it standing with the lid closed. Values ​​above 5 ppm can also be achieved
    4. It can now stand or “ripen” for as long as 2 hours until someone feels thirsty again. The H2 levels even increase during this ripening period as long as the device remains closed.
    5. Refill soon after drinking and then begin the 5 or 10 minutes of electrolysis straight away.
    From here on again, 1st point above. This means no one has to wait because H2 water is produced in advance. Your typical drinking amount is approx. 250ml

    If you have drunk enough, you will not be thirsty at meals, but you can also drink any water, water, no matter what pH value, CANNOT change stomach acid:
    www.aquacentrum.de/faqs/basisches-wasser-und-magensaeure/

    Truu water (Wasserweik) also works, no problem, it's reverse osmosis water

    Regardless of whether you are sick or not, as you wrote, alkaline and at least 2 ppm H2 content
    Understand cancer and other 499 diseases, all of mental origin, and go through the healing phase in a relaxed manner, because there is knowledge about biology and not a mishmash of hypotheses from all the “therapists”:
    www.aquacentrum.de/videosammlung-neue-germanische-heilkunde-neue-germanische-medizin/
    I'm happy to help in any weather, I always have a quick nose to find the cause and then bring about hope that everything is just a healing phase and that a sensible special biological program is underway.

    pH value doesn't matter, but 11 no longer tastes good and is difficult to achieve
    Water with H2 gas is from fresh to 1 hour or more old, always different, even from the systems never the same, so only 1 water system, not several!
    Or a system that can do everything:
    www.aquacentrum.de/produkt/aquavolta-osminion-100-gpd-umkehrosmose-anlage-ph-wert-erhoehung-h2-gas-anrichung/
    My best investment

    Yes, H2 transmission works:
    See here from page 90:
    www.aquacentrum.de/app/uploads/2019/08/Elektroaktiviertes-Wasser-Asenbaum-2019-10te-Auflage-eBook-469-Seiten-by-Karl-Heinz-Asenbaum.pdf

    Your conclusion is correct.

    Given your hardness, only the Aquavolta® Osminion comes into question, otherwise you will have to deal with a lot of limescale in jars and bottles and you definitely want to reduce the limescale content:
    www.aquacentrum.de/ioniservertrag/
    See video above
    This is the Osminion:
    www.aquacentrum.de/produkt/aquavolta-osminion-100-gpd-umkehrosmose-anlage-ph-wert-erhoehung-h2-gas-anrichung/
    I would provide you with 2 waters:
    1. Water: approx. 22 to 30ppm minerals, i.e. slightly mineralized, slightly acidic to neutral pH water with H2
    and 2. Water: pH9,5, mineralized with approx. 100ppm minerals.
    And you can increase the 30ppm and 100 ppm if you want by mixing/blending only filtered water. All with a single regulator marked with a green washer. This means you can mix as you like according to your taste and water philosophy, sometimes just like that... practically 111 waters are possible.

    Then see you later, when you have listened to the topics including the first audio video from Hamer, please.
    Can also be in the evening
    Age

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    1. Can the hexagonal structure of water from a wateronizer be measured or verified microscopically?

    2. If water has a hexagonal structure, does that always mean that this water is also “informed”? Or can it be that you have a hexawater that ONLY has this hexagonal structure but is NOT “informed”.

    3. Can water with a hexagonal structure also be assigned/informed NEGATIVELY with “bad” information or is the hexagonal structure only “reserved” for GOOD/POSITIVE information?

    Karl Heinz Asenbaum | Measurability of hexagonal water, structure, information, EZ water according to Gerald Pollack

    To 1.

    The good news for all esotericists first: Hexagonal water molecule clusters can be detected in water from a water ionizer both microscopically and with the help of magnetic resonance studies. (See the studies at the bottom of this post.)

    The two bad news: These are just images of a moment and they never represent all of the water. The first is because even deeply frozen water has, in addition to the typical hexagonal ice crystals, larger and smaller clusters that are constantly changing.

    The latter is shown in Gerald Pollack's book “Water – Much more than H2O” based on many studies. In the area of ​​liquid, i.e. not frozen, water, Pollack differentiates between “bulk” water (i.e. the main amount of a water sample) and EZ water (exclusion zone water), in which he has demonstrated a hexagonal structure that differs in some points from that different from ice crystals.

    From this EZ structure, anything that is not pure water (H2O) is separated downward into bulk water - these are primarily ions - to form a pure, thin crystalline hexagonal structure similar to ice. This EZ water refers to very thin interfaces to hydrophilic (water-non-repellent) substances.

    EZ water is a peripheral phenomenon, like the skin on our bodies. It is an interface phenomenon of water, which I would like to illustrate with the following example:

    Water normally has a surface that separates it from the atmosphere. The atmosphere absorbs water and is therefore hydrophilic. If I now pour water-repellent (hydrophobic) oil onto the surface of the water, no hexagonal EZ zones form at this point. However, there are additional EZ zones within natural water. Because natural water is also a solvent for hydrophilic substances, such as the cations of minerals such as sodium, calcium, magnesium, etc.

    Hexagonally structured zones also form around these cations, with which the water, so to speak, separates itself from the dissolved substances. Depending on the amount of dissolved minerals, there are also hexagonal structures on these inner boundary lines:

    Due to the higher salt content, there are significantly more of these in the Dead Sea than in the mineral-poor Volvic water.

    Basically, and regarding the main mass (bulk) of liquid water, the formation of water clusters follows a very simple rule in addition to the influences of gravity and movement dynamics:

    The warmer the water, the larger the average cluster size becomes, until all clusters above the boiling point dissolve. Water distilled from steam contains nothing other than water molecules. Whether these are hexagonal, smaller or larger in structure depends primarily on the temperature. Basically, it is always a mixture of structures. However, the hotter the water is, the fewer hexagonal structures there are.

    2 to:

    As soon as we talk about structure, this also includes the possibility of information storage, which in the case of water is referred to as “water memory”. This is especially true if this structure can be kept stable, which is the case when liquid water forms into ice.

    Ice also releases dissolved foreign substances such as ions during the freezing process downwards into the not yet frozen water, which then becomes richer in minerals. Thawed ice contains only traces of salts.

    All scientific attempts to prove information storage in water therefore refer to very cold water. This makes the belief that one can achieve beneficial or harmful health effects by drinking “informed” water an esoteric dogma.

    Because all the water we drink is heated by the body to around 37 degrees C before it can be absorbed into the circulatory system. Even if we suck ice cream, its hexagonal structure and stored information do not enter the blood because the smaller clusters in particular have almost completely disappeared at this temperature.

    There is also another argument:

    As soon as we put our lips on the drinking glass and touch the surface of the water, the EZ zones there disappear. Because the lips are hydrophobic, i.e. they repel water. All cells in our body are covered by a water-repellent lipid (fat) layer.

    For this reason, hexagonal water has no possibility of harming or benefiting the body through stored information. None of our body cells have the ability to absorb structured, clustered or “informed” water.

    When the cells need water, they open a switch at which the water molecules are not allowed to line up as a “traveling group” but only individually to gain entry. This switch is called aquaporins. They only allow unstructured water into the cell, molecule by molecule.

    The question of whether hexagonal water exists without information can be answered quite trivially with no. Because a hexagon contains different information than an octagon or dodecahedron.

    Water has its own mathematics and physics at every temperature and depending on the dissolved substances. Ultimately, it is precisely these two factors that determine whether water has a health-promoting effect or is harmful.

    Regarding 3: Whether even water can be “good or bad” if it is hexagonal?

    My answer as a scientist can only be: This is purely a matter of faith.

    If water is to be judged using a moral category at all - as the Japanese photographer Masaru Emoto, who died in 2014, did - you'd better ask a priest about it.

    For example, Pastor Jürgen Fliege, who wrote a book of faith with Emoto about “The Healing Power of Water”.

    For Emoto himself, this kind of healing power, which consisted of praise and blame for water, did not help with his type II diabetes. He knew this too when, according to Wikipedia, he finally said:

    “Therefore, the photograph of crystals is neither science nor religion. I hope it is enjoyed as a new type of art.”

    Unfortunately, you can't drink photos either.

    Lecture by Masaru Emoto on hexagonal structures in water

    Downloads Studies | Water clusters, hexagonal water, hydrogen bonds, water structure, molecular structures water

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    FAQ: Is the oxidizing gas ozone also produced when water is ionized?

    Good morning, Mr. Akgün.

    I'm planning on getting a water ionizer. The AquaVolta is currently keeping me under its spell 🙂 A few questions arise... the most important one: Is ozone also produced when the water is ionized? This is the case with room ionizers or air ionizers / air ionizers.

    Best wishes
    …….michael M…….

    Answer from Mr. Asenbaum as to whether ozone is produced during the electrolysis of water by a water ionizer

    Hello Mr. M.,

    I can answer that briefly. To put it simply, electrolysis produces the following reaction products:

     

    1. At the anode, “acidic” activated water is formed through oxidation: 2H2O − 4e → 4H+ → + O2 ;
    2. At the cathode, “basic” active water is created through reduction: 2H2O + 2e → H2 + 2OH- ;
    3. This results in the following highly active antioxidants: OH−, H3−O2−, H2, HO2•, HO2−, O2−.
    4. If common salt NaCl is in the water, chlorine gas also forms at the anode: 2Cl − − 2e → Cl 2 ;
    5. This forms the following highly active oxidants in the anode chamber: Cl2O, ClO2, ClO−, HClO, Cl•, O2•, O3 (=ozone), HO2, OH• ;

    Typical for alkaline electrolyte water (formerly called “ionized” water) is an increase in the pH value and an unusual reduction in the redox potential.

    Typical for acidic electrolyte water (formerly called “ionized” water) is a reduction in the pH value and an unusual increase in the redox potential.

    What does “unusual” mean in this case? Normally, with non-electrolyzed water, the redox potential changes with the pH value by 60 millivolts per pH level.

    This means that the redox potential of normal water caused by its ingredients is 8 millivolts lower at pH 60 than one with pH 7, while at pH 6 it is 60 millivolts higher.

    In contrast, in electrolyzed water the redox water can be shifted up or down by more than 100 mV per pH level. From today's perspective, however, the redox potential of electrolyte water is no longer a factor that is worth measuring, since ultimately - for drinking water - it is primarily about the content of dissolved H2, i.e. hydrogen. This is responsible for the extraordinary redox potential, completely independent of the changed pH value. For example, there can also be water with a pH of 6 or lower that has an exceptionally low redox potential.

    I don't know why you're so interested in ozone. However, in a water ionizer it only occurs in the water that is not intended for drinking but for disinfection, where it reacts quickly to form the reaction products mentioned.

    Nowadays there are also devices for the exclusive production of hydrogen-rich drinking water. For example the Aquavolta hydrogen booster. These work with a different membrane than water ionizers and do not require (acidic) water on the anode side. They also only change the pH value insignificantly. This is where oxygen and ozone escape into the air. With the Aquavolta hydrogen booster, the ozone reacts in a matter of seconds in the lower condensation container so that no ozone can escape. This is different from other hydrogen boosters that release the gas directly into the air. But even there the quantities are hardly measurable.

    With kind regards,

    Karl Heinz Asenbaum

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Question about the preset pH values ​​in the display of the EOS Touch | Values ​​are quite high even at level 1 | Acidic water not acidic enough

    Hello Mr Akgün,

    Thank you for getting in touch and for extending the test phase.

    I actually have two problems, one of which I think I've solved by playing around with the settings. (Set PH value correctly)

    You said in a YouTube video that you should set the raw PH value to 6,6PH so that the device works at its strongest.

    However, this meant that even with the highest flow rate (2,1L) that was possible for me on level 1, the values ​​were far too high to start drinking

    The following:

    Level 1: 9,1
    Level 2 9,3
    Level 3 9,6
    Level 4 10,2
    Level 5 10,5

    Now I went and set the raw PH value to 7,9.

    Now at least the first steps are correct so that you can start with test drinking.

    Here's what I measured:

    Level 1 8,8
    Level 2 9,1
    Level 3 9,3
    Level 4 9,6
    Level 5 10,0

    I actually only have one thing in mind for the acidic water. I just want to run the water through the outlet tap at the highest level every morning for disinfection. You mentioned this in a YouTube video.

    But since I can't get below 6,5PH to level 4 acid with 0,8L flow at the outlet, I think there's no disinfection at this PH value, right?

    Is there another way to disinfect the outlet tap?

    At what pH value does disinfection take place?

    The device should actually get below 6,5 at the outlet tap, right?

    Thanks for the reply and for the help.

    It's not that easy to work your way into it :))

    LG Frederik Schmitz

    Answer from Yasin Akgün | Without the addition of salt, there is no reliable anolyte / disinfectant, acidic water

    Hello Mr. Schmitz

    You cannot make water as acidic as you like without adding salt.
    The most acidic water you get is 0,8 liters of water, namely the water from the sewer hose. Speak÷
    Level 4 Press alkaline, flow to 0,8 liters/min, and then the acidic wastewater from the wastewater hose, which could possibly be pH 5.

    What exactly is your goal?

    You could mobile produce a neutral anolyte, i.e. both waters in one:

    www.aquacentrum.de/shop/aquacentrum-blue-700-hydrogen-water-maker-hrw/

    Or as a spray: www.aquacentrum.de/shop/aquacentrum-beauty-blue-500-hydrogen-water-maker-hrw/

    Or professionally, this slightly larger device:

    www.aquacentrum.de/shop/aquavolta-eca-water-tractor-eca-anlage/

    I'd like to know what you're up to so I can give you more tips.
    Due to the free trial period, it is extended by another week.
    The EOS devices are truly the best and tastiest, don't let the sour water issue confuse you.

    All the best
    Yours, Yasin Akgün

    Question from Mr Schmitz | There isn't really any acidic water coming out of the top of the outlet

    Hello Mr Akgün,

    Would you have any more information for me regarding the question of how best to disinfect the outlet of the water ionizer because with the acidic water level 4 I only get a PH value of 6,5 with a flow of 0,8L?

    I also have a second question.

    ..if you want to take the water in the blue bottles with you to work, what higher PH value would you recommend so that you can drink it throughout the day to still benefit from the high PH value?

    Over time, a little bit of hydrogen is lost and the PH value drops.

    LG and thanks in advance.

    Frederik Schmitz

    Reply Yasin Akgün | Regular disinfection by descaling the water ionizer with citric acid and a dash of hydrogen peroxide

    Hello Mr. Schmitz

    Thanks for your question.

    Now I know what you want, disinfect the outlet.

    I would rather descale and disinfect every 14 days or so with citric acid and a little hydrogen peroxide.

    Everything else doesn't work with the device, from the waste water hose it can reach pH 5, depending on your water, but not from above, because the ratio there is twice as high, so everything is diluted.

    Otherwise, you could use a funnel to pour in a little hydrogen peroxide every now and then and let it work if you have any concerns.

    Hope this helps you

    Love greetings

    Yasin Akgun

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Question from Italy | Could I also make my own “hydrogen-saline” eye drops?

    Dear Mr. Akgün,

    My name is Mark and I am writing from Italy.
    I am fighting with all my strength against the progressive impairment of my father's vision (end-stage glaucoma).

    These studies and the following YouTube video give me new hope:

    http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0099299 Hydrogen-Rich Saline Promotes Survival of Retinal Ganglion Cells in a Rat Model of Optic Nerve Crush
    https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3257754/ improvement of Glaucoma Model Alternatively, H2-loaded eye drops were prepared by dissolving H2 in saline and directly administering to the ocular surface activation of Müller glia, astrocytes and microglia at 7 days after ischemia-reperfusion injury, improving the recovery of inner retinal layer thickness to >70%.

    Could I also make my own “hydrogen-saline” eye drops?

    Can that be possible?

    I am here with great interest http://www.vitaswing.de/gesund/ph-milieu/wasserionisierer-diy.htm read the instructions on how to build an H2 water ionizer.

    My questions are:
    Does the H2 water react with the metal parts - including stainless steel, although titanium would probably be better (oxidation like with hydrogen peroxide?) - and is therefore contaminated with heavy metals (especially when magnesium chloride is added)?
    Does the H2 water react with the plastic container and with the straw (oxidation like with hydrogen peroxide?) and thereby become contaminated by the plastic chemicals?
    The container should not only be BPA-free but also BPS-free or PVC-free (and be H2-resistant?).

    IZUMIO – holy water? 4,700 times more hydrogen than Lourdes Miracle Water

    Is this DIY device comparable?
    Or rather with this https://holyhydrogen.com/ or http://www.sgn80.com/blog/now-you-can-have-the-fountain-of-youth-right-in-your-own-home / Now there is an easy, simple and inexpensive way that you can take water and infuse it with Hydrogen Ions. Mega H is an electron donor encapsulated powder of silica hydride, invented by Patrick Flanagan?

    How does your Aquavolta hydrogen booster perform? Can it be compared to http://brilliantz.com/shop/products/?itemID=14?

    How much hydrogen (from-to) does the AquaVolta Booster produce and what is the container made of?

    Please help me fight against my father's progressive vision impairment!

    Thank you very much
    Mark B.

    Answer from Karl Heinz Asenbaum to the question about the production of “hydrogen-saline” eye drops

    Hello Mr. B.,

    Unfortunately, we are not authorized to give you health advice.
    Technically, with one of ours Hydrogen booster and a physiological saline solution certainly produce H2-rich drip solutions. However, it probably hasn't escaped your attention that the study is an animal experiment. So probably no doctor has ever carried out such a treatment on humans.

    By the way, the young man in the video is not talking about a drop treatment, but rather about drinking H2-rich water.

    If you want to build a water ionizer yourself, you need to use platinum-coated titanium electrodes. At least if you want to drink the water, because non-precious metals would react with the water. Platinum or ruthenium is necessary as a catalyst, at least on the anode. But if you want dissolved hydrogen, you also need platinum cathodes. The H2 bubbles on all other materials are so large that they do not dissolve in the water. There is a lot of bubbles, but none of it dissolves.

    AquaVolta® Hydrogen Booster - PEM water ionizer 1000

    HB05 or HB 04 from Hibon

    Because of the plastic problem, professionals usually use HDPE.

    Izumio water is pressed into the bag at 2,8 ppm. The comparison with Lourdes water is purely an advertising phrase, as Lourdes water (that from the source, not that from the so-called Lourdes device) contains less than 0,1 ppm dissolved hydrogen (lower measurement limit). It's really easy to lie on top of that. 1 million times 0 is also zero.

    The link to the Brillantz shop does not work. As far as I know, that's where the... HB05 or HB 04 from Hibon (see picture on the left) offered, this is a cheap Chinese replica of the Korean original from Paino, which is the basis of our booster. The copy can be recognized by the round design of the lower part.

    I recommend using glass bottles, which we provide 2 of. The production cylinder is made of plastic. I don't know the composition. Our booster delivers around 0,1 mg of dissolved hydrogen per minute of production. I recommend a production time of 15 minutes for a half-liter bottle. The pressure limit is exceeded at around 40 minutes and around 4 ppm.

    With kind regards,

    Karl Heinz Asenbaum

    Link to the post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Miriam S.: In his book: “Water helps with allergies, asthma, lupus” writes Dr. Batmanghelidj, you shouldn't drink alkaline water all the time. You and Dr. Irlachers, on the other hand, say that you should drink 0,3 liters per 10 kg of body weight every day. Why are you right?

    Our formula is a rule of thumb

    The formula you mentioned corresponds to the total water requirement that a person has. This is because every water molecule is exchanged in the body within 2 weeks, resulting in this formula. The more alkaline water molecules there are when replenishing the water, the better because they make deacidification easier.

    Of course, you also consume some water with your solid food, and in addition to alkaline active water, most people also drink other non-alcoholic drinks whose water content can be deducted. When we sweat, we need more water, and when we drink alcohol or drinks containing caffeine, we also need more water. We also have an increased need for water when fasting. So our formula is a rule of thumb that you of course have to adapt to your individual situation, which we don't know. In any case, I think you should drink as much alkaline active water as possible within this framework. However, clearly within the framework of the Drinking Water Ordinance with an upper limit of pH 9 to a maximum of 9,5.

    There are also natural sources that have such pH values. Therefore, it is a safe drink that you can drink every day for life. In the USA, where Batmanghelidj spent the last years of his life, some sellers of water ionizers promote drinking water with a pH of 10 and even higher.

    We strictly distance ourselves from this because it has nothing to do with the alkaline active water for drinking that we describe here.

    Dr. Batmanghelidj has brought a lot of movement to water medicine with his Foundation for Simplicity in Medicine and with his provocative book title “You are not sick - you are thirsty”. Batmanghelidj has shown that water with a little salt can help with many diseases.

    But the lack of water, the —> dehydration, is something that we can of course also combat with alkaline active water - even better because of the more favorable redox potential.

    The other thing, however, is hyperacidity, a topic that Dr. Batmanghelidj doesn't really penetrate thematically at any point.

    He gained most of his experience with water therapy as a doctor in an Iranian prison. There is neither overeating nor lack of exercise, there is no alcohol consumption, no cola, no pork, in short, all the typical causes of our excess wealth are missing there.

    Would Dr. Batmanghelidj is still alive today - we could certainly convince him that our civilization would be better off opting for alkaline activated water, especially since he was obviously completely unaware of the process of electrochemical activation.

    Excerpt from the book by Karl Heinz Asenbaum: “Electro-activated water – An invention with extraordinary potential. Water ionizers from A – Z”
    Copyright 2016 www.euromultimedia.de

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Dr. Reinhard D.: In your pH table for drinks (“Drink yourself alkaline”), for example, you describe fruit juices as very acidic. I have to disagree with that, because fruit is one of the best-known alkaline foods. A lemon is sour, but it doesn't seem that way!

    A popular error does not become the truth even if it is repeated en masse. According to the biologist Dr. According to U. Warnke, there is no food that is alkaline when measured directly. However, I have found at least one thing, namely breast milk, which is slightly alkaline. But this is the exception. So how does the claim come about, for example a lemon work basic?

    This error goes back to a flawed theory by food researcher Ragnar Berg from 1913 and has been written off again and again since then, like the fairy tale about lots of “iron in spinach”. (Food and beverages, their composition and their influence on health, with special consideration of the ash components, Dresden, 1913.)

    Lemon cooked

    Berg had the most common ones After burning food to ash, the ash with the mineral residues was then dissolved in deionized water and the pH value of the ash solution was determined. If there are many cationic minerals left, the pH value rises above 7 and the result is a supposedly alkaline food. If more anions are present, the pH value drops below 7 and, according to Berg, the result is an acidic food.

    Apart from the incorrect concept of acid at the time, where cations instead of hydroxide ions were considered bases: Ragnar Berg simply omitted from his measurements the organic acids that were steaming to the sky as carbon dioxide in his laboratory chimney. As if we were eating the ashes of a lemon and not the lemon itself. However, our body also has to break down the organic acids and dispose of the carbon dioxide through the lungs.

    Of course, the same applies to other acidic fruits. An orange juice or apple juice is and always seems sour.

    That's not a problem, argue the supporters of the acidic alkaline diet: we breathe out all the time. That's true, because the lungs are a very efficient disposal organ for organic acidic waste materials. But Our chimney is not in Ragnar Berg's laboratory, our chimney is our blood. Although blood is well buffered against acids, it can only transport an acid load to the lungs that lowers the pH value by a maximum of 0,1 pH. And in this small transport window for acids, the acids that require the kidneys also have to find space!
    Therefore, “organic” citric acid is just as damaging to the body as an inorganic acid. The lemon has absolutely no alkaline effect. Our pH table for drinks is correct. And if you are acidic, drinking lemon juice will do no good.

    Excerpt from the book by Karl Heinz Asenbaum: “Electro-activated water – An invention with extraordinary potential. Water ionizers from A – Z”
    Copyright 2016 www.euromultimedia.de

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Mario M.: How much alkaline active water do I need to drink to lose weight?

    The inventor of the pH diet, Dr. Robert O. Young has been preaching for years that fat is nothing but the body's self-protection against acidification. In fat cells, which are nothing but fatty acid depots, excess acid from metabolism is removed.

    Sangh Whang said boldly: Fat is acid. And he invented an illustrative experiment in which pieces of beef fat were placed once in strongly acidic and once in strongly alkaline activated water. And lo and behold, the fat gradually disappears in the alkaline active water, it is “melted down”. Both of these may be true if the activated water is very alkaline (pH > 11), but in no way proves that alkaline activated water helps you lose weight. Sang Whang's experiment could also mean that the fat we eat can be more easily absorbed into the body with the help of alkaline active water. After all, it's no use just dissolving fat because it won't simply be excreted, but rather transported somewhere else. And how is the water we drink supposed to get to our body's fat deposits if we don't have our fat cells removed from our stomach by a surgeon using suction and then soaked in alkaline water? A direct effect on the fat cells through drinking seems to be ruled out. But what speaks for an indirect, systemic effect?

    With its contribution to metabolism, alkaline activated water can indirectly help to break down acids, because fat loss leads to increased acid load. However, this can only take place if the prerequisite for fat loss is met, namely a calorie intake that is below the energy requirement.

    There are many examples of how overweight people were able to reduce their weight simply by drinking alkaline active water, without fundamentally changing their eating habits. This is simply because they were able to switch to a low-calorie state by avoiding high-calorie drinks - while consuming the same amount of solid food.

    A proven quantitative formula is drinking a maximum of 0,3 liters per 10 kg of body weight (pH 9 - 9,5). If someone is taking medication with a diuretic (watering) effect, for example, the prescribing doctor must determine the amount of water depending on the performance of the heart.

    The reason for losing weight through drinking is probably that by drinking water (0 kcal/liter) you reduce the generally underestimated calorie intake when drinking sweet drinks, for example, without eating more.

    Decrease

    A good example of the influence of drinks on obesity is the Mexicans, who have now risen to the top of the world in obesity statistics, even though they eat less solid food than before. But today everyone drinks an average of 160 liters of high-calorie lemonade per year. (Source: ZDF morning magazine July 2, 7). Dr. med. Walter Irlacher regularly pointed out in his lectures that it is much easier to become acidic through drinks than through food, saying: “In two hours you can easily drink two liters of strong beer at the Oktoberfest in Munich, but no one could drink 2013 kg Eating roast pork.” https://www.youtube.com/watch?v=YkrILX2sUpc
    We often receive feedback like this: “My notorious craving for sweets – taken care of! Now I can still eat sweets, but I eat a lot less and have recently been able to stop voluntarily 😉

    In addition, in stressful situations, where my stomach acid used to boil up, I am suddenly completely in control of the situation. My mind is still aware of the problems - my body is no longer, these are completely new horizons for me!

    This is probably a psychosomatic reflex: Eating makes you tired and initiates a phase of relaxation. That's why many people use food as a substitute for happiness because it distracts them from stressful situations in the short term. Sugary foods in particular increase the level of the happiness hormone serotonin at the expense of stress hormones. Sugar can become an addictive substance and, due to its high calorie count, it can also make you fattening.

    As soon as you just think about eating, the cephalic (head) phase of the digestive process begins, in which the stomach begins to lower its resting pH value of approximately pH 4 and produces gastric juice. If you only drink water instead of the addictive sweet, the filling level of your stomach increases in the short term. It's all about the relaxing filling feeling. Often nothing has to be digested in order to complete the cephalic phase of digestion without consuming any calories. This causes the stomach to return to its resting pH. Stomach acid no longer “boils” due to stress. By quickly coupling the alkaline active water you drink into the bloodstream The large water consumer brain is also better supplied again, and the main reason for the “small hunger in between”, namely the need for quickly absorbed minerals and water, is satisfied without calories due to the minerals in the water.

    Alkaline active water, drunk shortly before and with meals, reduces the desire for large amounts of food due to its pressure on the stomach walls, even when really hungry, as the feeling of satiety can be achieved much more quickly. There is a “stomach-filling” reflex that triggers a hormonal cascade that suppresses the feeling of hunger.
    Digestive enzymes are not deactivated by increasing the pH. —> Stomach acid. Carbonated drinks, on the other hand, increase the volume of the stomach due to flatulence, which can lead to gastric expansion if consumed over a long period of time. Alkaline activated water does not contain flatulent carbon dioxide.
    On the contrary, it can partially neutralize them and thereby calm the stomach. Alkaline activated water flows through the upper part of the stomach pouch directly into the duodenum via the gatekeeper.

    Excerpt from the book by Karl Heinz Asenbaum: “Electro-activated water – An invention with extraordinary potential. Water ionizers from A – Z”
    Copyright 2016 www.euromultimedia.de

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Can the water, as I requested above with 8,5 as a compromise, be drunk 3 liters a day forever without switching to “ordinary” water every now and then?

    Answer from Yasin Akgün about optimal pH and hydrogen content for drinking

    So at 8,5 there isn't a lot of hydrogen in it, rather 9,5, i.e. measured with the violet indicator.

    You don't need to be afraid of the weakly powdered alkaline water, it is really weak compared to stomach acid or something, but it still has more alkaline than acidic minerals after ionization. For more information, watch our video below:

    www.aquacentrum.de/faq/

    But that's not the most important thing.

    The hydrogen content, which can reach over 2000ppb, is even more important.
    You want to drink around 1000, i.e. pH 9,5, which is where it tastes tastiest

    But you can also use pH 8,5, then only a third or half of the hydrogen is left in the water.
    You could also test it yourself:

    www.aquacentrum.de/shop/h2-blue-kit-wasserstoff-testfluessigkeit-durch-titrationsverfahren/

    Using our strongest water ionizer, without adding salt, we were able to determine a hydrogen content of over 11 ppb in Munich water at around pH 2400.

    And no matter what water, what pH, it's a weakly buffered base, so you can drink as much as your body wants.

    Even being thirsty sometimes isn't a bad thing.
    Everything is allowed, but ideally with a lot of hydrogen.
    It then takes what the body needs.

    An additional solution for your application would be to make the water more basic in addition to the ionizer and to reach over 1000 ppb with hydrogen, e.g. at pH 9, and then to boot the water again with hydrogen:

    www.aquacentrum.de/shop/aquavolta-wasserstoff-booster-pem-wasserioniser/

    Link to FAQ post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Questions about water ionizer filters and calcium layer etc. - hydrogen content

    • If you have a decalcification system in your house that uses salt to decalcify the water, and the filter doesn't filter out the salt, does this have an impact on the water when it goes to electrolysis? Does this then result in a very basic lye and very acidic water, i.e. anolyte and catholyte? And the salt tablets are certainly not the healthiest salt. Can I prevent this somehow?
    • Can you tell me what the differences are in the water ionizer filters? Is there a qualitative difference? For example, a water ionizer with two filters will produce water that is twice as clean?
    • Should I have my water tested beforehand so they can provide me with the correct filter?
    • Can the water ionizers (e.g. the “AquaVolta Moses”) only deliver filtered water, i.e. without electrolysis?
    • Why does the “Moses” filter have a calcium layer? Our tap water already has a relatively high amount of calcium (107 mg/l).
    • I will probably decide between the “Moses” water ionizer and the “Eos Genesis”. When does which device make the most sense?
    • If you make the water less alkaline, does that mean that it doesn't contain as much hydrogen?

    Many thanks for your help!

    With kind regards,
    Christoph Rösch

    Answer from Yasin Akgün about general questions when choosing a water filter

    Dear Mister.

    If you have any questions, we would be happy to hear from you. I will also try:

    Don't worry about the descaling/ion exchanger. If possible, set the hardness to °dH8-10.
    If the flow is low, the highly alkaline water will otherwise taste moody. But if none of this is an issue, there is too little salting. ECA systems use salt concentrations of between 4,5 and 7%, i.e. much more.

    More about that in this video:
    www.aquacentrum.de/faqs/macht-es-sinn-bei-hartem-kalkhaltenm-wasser-das-wasser-vorher-zu-enthaerten/

    Because of differences to water ionizers:
    Briefly and succinctly I can say the following from my experience:
    Every ionizer can produce basic, hydrogen-containing water to some extent.
    The maximum achievable values ​​for many ionizers are also quite high, i.e. pH 10,5-11, with a very low minimum flow.
    The only difference is that most ionizers do not have good or user-friendly limescale protection, and so the values ​​go down after a few days or weeks.

    And the other issue is installation, most people want an under-sink ionizer:
    www.aquacentrum.de/shop/eos-revelation-ll-untertisch-wasserioniser/
    It is currently heavily discounted because I would like to fulfill my customers' wishes

    The third important issue is the reliability of the water ionizers.
    Many water ionizers fail in the first 5 years, whereas others still work very well after 10 years, and the taste of the water tastes like it did on the first day, like delicious water with no aftertaste, except for the strong alkaline taste at a high ionization level low flow.
    If the water is filtered, it should taste like pure water.
    Not moldy or anything like that

    EOS makes the most reliable water ionizers:
    www.aquacentrum.de/shop/eos-revelation-ll-untertisch-wasserioniser/
    www.aquacentrum.de/shop/eos-touch-wasserioniser/
    www.aquacentrum.de/shop/eos-genesis-wasserioniser/

    Then the manufacturer Ionia, the AquaVolta® Moses 7, is very easy to install on the tap because it has a rotary control.
    www.aquacentrum.de/shop/aquavolta-moses-7-wasserioniser/

    It may break in the first 1-2 weeks, but then it will be replaced straight away. But when it is running, these devices run the longest so far, and we have already exchanged several devices that are over 12 years old for a new model. They were all still fully functional.

    When this matter is clear, there is not much left.
    Either a double system, i.e. an EOS, or the simplest one, the Moses 7, which is ideal for connecting to the tap.
    In terms of filters, a double filter system is of course better in terms of performance, but when it comes to heavy metal salts, activated carbon filters that are not made for salts tend to fail.
    So rather uncertain filter performance.
    Then you would use a pre-filter, but only if you are concerned about heavy metal salts.

    The best place to have a detailed water analysis done is here:

    www.reefanalytics.com/Laborprobe/Wasseranalytik-WA-Premium::452.html
    If something comes out, we'll continue to see whether a pre-fitter is necessary.

    Yes, all water ionizers can only deliver filtered water even without electrolysis. Every water that comes out of the water ionizer is filtered.

    Because of calcium:
    www.aquacentrum.de/faqs/wie-schlimm-das-calciumsulfit-den-filtern-is-especially-against-the-background-that-we-also-use-richly-filtered-water-without-ionization/

    Of course, the less power, the lower the pH value, as well as the dissolved molecular hydrogen content and the associated negative redox potential (abundance of electrons in the negative, minus sign range), which can be up to -600mV.

    Posted your questions online if I may.
    All the best
    Yours, Yasin Akgün

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Hallo,
    I have now been working on the topic of hydrogen for 3 days. I'm currently drinking Prof. Hechtl's slightly alkaline oxygen water (elixir). I'm a little confused as to what the difference to maintaining/improving health suddenly comes from. Lt. For Hechtl it is the oxygen...which sounds logical from his explanations. Please help me to understand this.

    I also have questions about the Aqua Volta Eos:

    Is the tap water through this device just as PURE as with an osmosis system? PPM?

    What about the VIBRATION mentioned by Mr. M.?

    And last but not least: I can also set the water to approx. 7,5 ph with the Aqua VE, as the 9-10 ph shown in the videos is too high for me.

    Thank you for the answers, also by telephone. Please promptly as I would like to decide on a device this year.

    Thank you very much
    Friendly greeting
    Andrew K

    Hello Mr. Kopp,
    Thank you for your email.

    So oxygen doesn't seem to make sense because it makes it more acidic, like the acidic oxygen-containing wastewater from the ionizer.
    It makes more sense without oxygen, or even with, it doesn't matter, definitely with a lot of hydrogen
    And that's where the EOS devices are best. Also in terms of taste.
    Everything else, especially RO water, really doesn't taste tasty.

    Because of vibration & co, it's up to you what you want to do, I'm a fan of using the UMH before:
    On the following page is the UMH Pure Gold, which is mounted under a tap on the cold water pipe or in front of an ionizer:
    www.aquacentrum.de/shop/umh-pure-vergoldet-kalkwandler/

    Because of 7,5 or pH 9,5
    It is important that you set pH 9,5 or at least 9, otherwise there will not be enough hydrogen and you will then have a good filter and taste improver for a lot of money.
    There is nothing wrong with alkaline water at pH 9,5, it is lightly powdered and still permitted by the drinking water regulations.

    There are base concentrates with heavily powdered minerals, mainly sodium, e.g. Sanacare etc.
    You have to add a little salt to the water, this device can do that:
    www.aquacentrum.de/shop/aquavolta-eca-plus-wasserioniser/

    But you don't need any of that. You want to drink delicious water with hydrogen.
    Hydrogen dissolves better in an alkaline environment.

    You just want slightly buffered alkaline water, WITHOUT adding salt
    But preferably 2-4 liters of this per day.
    You will love it, but it only starts to taste really good at pH 8,5.

    Therefore, give yourself the ionizer for Christmas and send it back if necessary.

    And yes, of course it is almost as pure as reverse osmosis water, both filters have the same activated carbon filters, please watch the short video:

    www.aquacentrum.de/produktcategorie/umkehr-osmoseanlagen/

    We have broken down the PPM topic here: www.aquacentrum.de/faqs/was-means-microsiemens/

    If you want to indulge twice, I'll give you a great role model for the EOS:
    www.aquacentrum.de/shop/wasserfilter-set-aquaphor/

    Looking forward to more questions
    All the best
    Yours, Yasin Akgün

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    On June 27.06.2016, 22 at 37:XNUMX p.m. Daniel S. wrote:

    Dear Mr. Akgün,

    ...Then I'm interested in your whirlpool shower. To be honest, I'm not sure if it should be one of yours or Aquadea's. At the moment I can't explain what real benefit precious metals and gemstones have on shower water. I know the theory, but in practice I couldn't tell any difference with the whirler for the rooster.

    Kind regards, Daniel S.

    Hello Mr. S.,
    Yes, that's good news...

    ….Because of the swirl shower head:

    I know the Aquadea shower heads because I was able to try them out several times.

    Would you rather have a soft, full shower experience or would you rather have a harder one?

    I also know the old VitaVortex shower heads, the company is now called something different, CARAT Aqua Plus, none of the whirl shower heads in the premium range come close to the new one Magic 7 from CARAT Aqua Plus (formerly VitaVortex) approach. Such a lovely shower experience that you won't want to get out of the bathroom. That's why I only shower every few days, otherwise I would spend half my life in the shower.

    No, joking aside. Simply test it, if it doesn't fit, send it back and we will refund 100% of the amount paid:

    www.aquacentrum.de/spezialcontentsguarantee/

    Hope this helps you

    All the best

    Yours, Yasin Akgün

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    When you read about the benefits of oxygenated water, isn't it better to leave the dissolved oxygen in the water instead of removing it?

    Dear Mr. Asenbaum,

    wow, this measurement result is a convincing argument.

    When will the new hydrogen booster be available and can you order it now?

    When you read about the benefits of o² enriched water, isn't it better to leave the dissolved o² in the water instead of removing it?

    After using the Aquaphaser you can smell an intense smell as soon as I remove the lid. What causes it?

    Can you pick up ordered goods from the water shop in Munich and what are the opening times?

    With kind regards,

    D.

    Answer from Kar Heinz Asenbaum ( Asenbaum@aquavolta.info)

    Hello Mr. D.,

    here for your questions:

    • The oxygen in the water is of no use to us. We don't have gills. One breath brings us more than 1 cubic meter of oxygen water. Only if the following is not given: 2 H2 + O2 -> 2 H2O does the dissolved hydrogen bring something physiologically.
    • im Aquaphaser (Aquator Mini) A gas mixture forms under the hood. You will usually smell chlorine because the thing works at a respectable 110 volts. This also creates the conditions for chlorine electrolysis. So if there are chloride ions in the water, which is not uncommon, it smells like a chlorine cleaner.
    • The Aquacentrum only has opening hours by appointment and usually only appointments for dealers who should also receive training at the same time. Aquacentrum is an online retailer without a physical store. We let service providers deliver. Otherwise we wouldn't be able to offer these prices because we would then need store staff. If we also delivered devices ourselves, there would be no time for advice.

    If you would like to work with us professionally in sales, we would be happy to take the time for you. Of course, as a customer, I will still be happy to answer your inquiries by email or telephone, as you always ask interesting questions that we can add to the FAQ collection.

    With kind regards,

    Karl Heinz Asenbaum

    Link to the post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    What happens in the body if you don't tolerate alkaline, hydrogen water well?

    Hello Mr Akgün,
    Thank you for the exciting information and the free download of the book.

    I have a question: what happens in the body if you don't tolerate alkaline water well? My mother only drinks the filtered ones because she always felt bad when she drank alkaline ones.
    At that time she had also started to increase the base value pö a pö, so she started low and then tried to increase it.

    Maybe you have an answer or even a solution for me?
    Thank you and best regards
    Catherine

    Answer from Yasin Akgün about initial reactions:

    Hello Ms. H.,
    Thanks for the feedback.

    In the beginning, especially when you are under the weather, you may experience reactions in your intestines or on your skin or have a headache.
    She should then drink level one.

    Check the pH value, not that the flow is very low, and level 1 already has pH 9...

    See video: www.aquacentrum.de/installation-wasserfilter/
    And then you can continue step by step.

    This product would be very important:
    www.aquacentrum.de/shop/karstaedts-darm-detox-und-mahlzeitenersatz/
    You just have to do it, but it's probably crazy...

    And otherwise, maybe try the booster, you would receive a special price because the tester:
    www.aquacentrum.de/shop/aquavolta-wasserstoff-booster-pem-wasserioniser/

    Hope this helps
    Kind regards
    Yours, Yasin Akgün

    Link to the post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Why does a large amount of water constantly flow out of the water ionizer's drain hose when bottling?

    Hello from Bitburg,
    The device arrived, even the missing part was sent super quickly (respect). I have put the device into operation and already have a question for you. Why does a large amount of water constantly flow out of the drain hose when bottling? Is this normal or is the device not working properly?
    Best regards .
    R. Angelo

    Reply from Yasin Akgün on November 01st. 2016 on the wastewater to fresh water ratio of a water ionizer

    Dear Mr. Angelo R.

    Thank you for your question. Any water ionizer that produces alkaline water by electrolyzing water always produces wastewater.

    The wastewater is necessary to split the water into its components, its ions, hydrogen (H2) and oxygen (O2). The membrane between the electrodes then separates the ions, i.e. the mineral salts in the water, which is why you can expect fewer acidic minerals at the alkaline outlet and more acidic minerals at the wastewater hose. The slower the flow and the higher the ionization level set, the stronger the separation.

    You can find out more about how a water ionizer works in this FAQ post:

    www.aquacentrum.de/faqs/was-ist-basisches-wasser-aktivwasser/

    There are water ionizers that try to save wastewater (EOS Genesis, EOS Revelation, EOS Touch). However, this is at the expense of the maximum strength that can be achieved. The less wastewater is produced, the more diluted the bass water is and therefore weaker. But it can also reassure you that we have made the Eos devices even stronger, so they are sufficiently strong, just like that Dion Specialthat you have purchased.

    Looking forward to more questions, all the best, Yasin Akgün

    Link to the post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Dear Mr. Akgün,

    As discussed by phone the day before yesterday, I need an ionizer for under the table.
    I still have the following questions:

    1.) Can I connect the ionizer system to my osmosis system (Bestwater Jungbrunnen 66-10)? This means that the ionizer system is not connected to the water connection, but rather to the output of my osmosis system so that the ionizer directly uses filtered water is operated.

    2.) What about the calcification? Can you clean it yourself?

    3.) How many filters does the system have?

    4.) When do the filters have to be changed?

    5.) How is the PPM worth?

    6.) What is the redox value?

    7.) How high can I set the acidic/alkaline water?

    8.)How long does the guarantee last?

    9.)Which system can you recommend to me that is TOP!!!!.

    Answer from Yasin Akgün

    Hello Mr. K.,
    Thank you very much for your questions, which I would like to answer as follows:

    1.) Unfortunately, you cannot simply install or use a reverse osmosis system in front of the water ionizer, as reverse osmosis systems with tanks do not generate regular pressure and can hardly keep the required flow of 1 liter/minute and the pressure of 2 bar constant .

    Direct-flow reverse osmosis systems without a pressure booster pump do not provide the required pressure, or the back pressure from the downstream water ionizer reduces the flow too much, so this technology is out of the question.

    What it's about would be this Morion reverse osmosis system, which always provides a constant pressure of reverse osmosis water because the tank feeds its pressure via the tap water pressure. I still suggest that you use tap water directly for the water ionizer, as it also filters the water with activated carbon media, like any reverse osmosis system. The membranes are not allowed to filter chemicals, which is why every reverse osmosis system always has several pre-filters/activated carbon filters integrated. More about reverse osmosis in the short film on this website: www.aquacentrum.de/produktcategorie/umkehr-osmoseanlagen/

    We can talk about replacing your BestWater reverse osmosis system with a Morion reverse osmosis system. I mean, but, no reverse osmosis water for the ionizer, it has enough activated carbon filters in the device.

    2.) What about the calcification? Can you clean it yourself?

    Descaling is necessary for every water ionizer, every 3-12 months, depending on usage, flow and limescale content. Following are the instructions: www.aquacentrum.de/ioniservertrag/

    3.) How many filters does the system have?

    Most modern water ionizers use two pre-filters, usually very large pre-filters, multi-layer activated carbon. Partly with silicon and also calcium layers for softer water.

    4.) When do the filters need to be changed? Every filter should be changed every 6 to 12 to a maximum of 18 months, even if not very many pollutants are expected in the water. It has simply been in the water for too long and collected pollutants could be released back into the water flowing past. From a bacteria point of view, it is also better to change the relatively cheap filters regularly. 67 euros is not the world. More about it in this video: www.aquacentrum.de/produktcategorie/wasserfilter/

    5.) How is the PPM worth?

    The PPM value you mean is the mineral content in the water, i.e. how conductive the water is and how many electricity-conducting substances it contains. All I can say is that depending on the water, the PPM value, i.e. the conductivity, can actually increase, because if your tap water has more alkaline minerals, the concentrate will also have more alkaline minerals, but the acidic side will have fewer acidic minerals , so have a total of minerals. You will definitely report back then. Nevertheless, the PPM content says nothing about the pollutant content, more on that here FAQ article by Karl Heinz Asenbaum about the conductance and its changes after ionization with a water ionizer.

    6.) What is the redox value?

    This also depends drastically on your water, the flow you have preset, the lower the stronger the water will be, and also the level you select (the gear). More about this in this FAQ article: www.aquacentrum.de/faqs/haltbarkeit-aktivwasser/

    7.) How high can I set the acidic/alkaline water?

    You can use the “Alkaline Water” control to set 4 different alkaline levels and 4 different acidic water levels. See video: https://www.aquacentrum.de/shop/eos-revelation-ll-untertisch-wasserioniserer/

    8.)How long is the guarantee? Varies depending on the device. Since you need an under-sink water ionizer, the Tyent UCE would come into question, which has a 2-year warranty, or my main recommendation, the EOS Revelation, which has 7 years because the EOS devices never break down. Which I can't say about the other water ionizer brands.

    9.)Which system can you recommend to me that is TOP!!!!

    www.aquacentrum.de/shop/eos-revelation-ll-untertisch-wasserioniser/
    E
    It's easy to order, you first test with us for 2 weeks and then another 24 weeks: www.aquacentrum.de/satisfactionguarantee/

    All the best from Munich

    Yours, Yasin Akgün

    Next question via email:

    Hello Mr Akgün,

    Thank you very much for the answers!!!, now I have heard that the dissolved hydrogen in water is very important and healthy!
    I've been dealing with this topic of water for a long time, and the more I read about it, the more questions come up.
    I have now ordered the following measuring devices:

    3xPPM meters
    3xPH meters
    3xHydrogen measuring devices

    Always from three different manufacturers, so I always get a neutral value. I will also order several bottles of healing water from recognized healing springs from various suppliers, such as Lourdes, Nordenauer Quelle and many outside Europe. It will certainly be very interesting to know what water properties these healing springs have!!.

    I still have some questions:
    1.) Which ionization system produces the largest proportion of hydrogen in the water?
    2.) How long does the hydrogen stay in the ionized water??? does the hydrogen dissolve at some point?

    Reply on Sep 29th 2016 by Yasin Akgün:

    Hello Mr. K.
    Because of the measuring devices:
    You should know this because measuring devices are not really reliable:
    www.aquacentrum.de/shop/ph-orp-redox-messgeraet-hanna-instruments/

    Could you send me the brands of the measuring devices please? I would save the money and just buy one measuring device.

    Ordering and measuring medicinal water doesn't make much difference, as the water will lose all of its properties on the way to you. You would have to carry out measurements at the source yourself, and nothing interesting would come out of it in terms of hydrogen content and redox potential.

    If you want the most powerful device, then the AquaVolta ECA Plus would be:
    www.aquacentrum.de/shop/aquavolta-eca-plus-wasserioniser/

    And also one of the EOS devices:
    www.aquacentrum.de/shop/eos-revelation-ll-untertisch-wasserioniser/
    www.aquacentrum.de/shop/eos-genesis-wasserioniser/
    www.aquacentrum.de/shop/eos-touch-wasserioniser/

    They all reach the saturation limit at low flow, depending on the water.

    If you then want to exceed that by up to four times, this would be an additional product and I would give it to you cheaper with the ionizer
    https://www.aquacentrum.de/shop/aquavolta-pocket-pem-wasserionisierer-hrw-elektrischer-elektrochemischer-wasserionisierer/

    Because of durability:
    www.aquacentrum.de/faqs/haltbarkeit-aktivwasser/

    Hope this continues to apply to you
    All the best
    Yours, Yasin Akgün

    Link to FAQ post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Is a water ionizer suitable for producing low-lime to lime-free water?

    A water ionizer first filters the water through several activated carbon filter layers. The one or two filter cartridges are usually integrated into the device. Fortunately, the filters do not filter the minerals in the water, otherwise it would be a reverse osmosis system.

    The minerals are then separated from each other by the electrodes and the membranes in between. So you then have two different waters:

     

    1. Water that contains more alkaline minerals than acidic ones and also contains the very important hydrogen
    2. A second water that contains more acidic minerals and contains oxygen instead of hydrogen

    Is calcium in water good or bad for the organism?

    Lime properties of alkaline water

    Since alkaline water contains many alkaline minerals, more calcium, magnesium, potassium and sodium are dissolved in it, so in popular language:

    It is more calcareous.

    After most of the hydrogen has evaporated from the alkaline water in the first 60-180 minutes, most of the calcium dissolved in the water precipitates.
    The limescale deposits are harmless calcium/potassium crystals that fall out again due to the increased alkaline mineral content (potassium, magnesium, potassium) when the water is no longer as active as when it was filled and can no longer hold them.
    You can find out more about this in the FAQ's in this FAQ article: www.aquacentrum.de/faqs/erhoehter-calcium-portion-im-basischen-aktivwasser/

    So after a while or the next day you will have turned the alkaline, calcareous water into soft alkaline water and could use it in a steam iron or steamer.

    Lime properties of acidic water

    With acidic “wastewater” you have few lime-forming minerals to begin with, and it is also slightly disinfectant, depending on the chloride content in your tap water. The higher this is in tap water, the more disinfectant the acidic water is. Of course, provided that you have produced as much acidic water as possible.

    So acidic water is also an option.

    Summary:

    In summary, I can recommend that you try it yourself, everyone has one here four-week test phase, which can be extended to 6 weeks: www.aquacentrum.de/satisfactionguarantee/

    Kind regards from Munich, Yasin Akgün

    Link to FAQ post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Good afternoon Mr. Asenbaum,
    I have read a lot from you and listened to the topic of ionized water on the Internet.
    Cheers! You put a lot of energy into this topic.

    In the meantime, I bought a device from Yasin and would like to use the devices actively distribute with.

    I would like to know whether you also give lectures, for example in Nuremberg, which is where I live. 

    Under what conditions something like this could take place if you wanted to. I would like to sell the devices in the therapeutic area. I'll add one for you “Objection” from a doctor. I would be very happy if you could tell me your opinion on this.

    I find it really exciting. But I can't find any adequate studies on this, only reports. Hydrogen is a high-energy molecule that does not occur freely in the cell for precisely this reason. It only gets into the mitochondria via NADH through shuttle systems, which are also precisely regulated. At the inner mitochondrial membrane, hydrogen is converted into enzymes and mTransported to the membrane (including protons and electrons) to ensure a specific membrane potential and redox potential. Only if these conditions work properly is the electron transport chain with the formation of H2O and ATP guaranteed. And of course also to avoid the oxyhydrogen reaction that would occur if molecular hydrogen came together with molecular oxygen (hence, among other things, the enzyme chain on the inner mitochondrial membrane). Molecular hydrogen is a not unproblematic substance because it could pass through all membranes without restriction and would disrupt a whole series of finely regulated processes.

    Studies that would not only show precise measurements of redox values, ATP, acid values, electron transport, but also electron microscopic images of mitochondria under such influences would be interesting. 

    With kind regards from Nuremberg

    Stephanie Vail

    On August 20.08.2016, 18 at 31:XNUMX p.m. Quantomed, KH Asenbaum wrote:

    Hello Ms. Vail,

    I rarely give specialist lectures anymore. They are mostly aimed at sales groups and they have actually been adequately trained by me over the last few years. I give public lectures in front of the camera and post them on YouTube. However, there are currently some in stockpile that still need to be cut.

    However, you are welcome to ask me individual questions, such as the one listed here:

    However, I don't know what the doctor who asked her meant by “adequate studies”. On page 368 ff. of my current book I have listed over 500 studies that I consider to be adequate. That's a lot when you consider that this branch of research has existed for less than 10 years.

    Download here:

    https://www.aquacentrum.de/downloadlink-e-book-elektroaktiviertes-wasser-von-karl-heinz-asenbaum

    In addition to the basically correctly described enzymatic mechanisms of energy metabolism, there is hydrogen gas everywhere in the human body,

    which constantly floods the body and is largely generated by the microbiota. That he membranes can penetrate effortlessly, making it the smallest and finest of all the body's own antioxidants. That he has any would disrupt “finely regulated processes” is a vague assumption that is not supported by anything that I know of.

    Although a significant amount of hydrogen is exhaled primarily through the lungs and meets oxygen there, Not a single person who suffers from hyperactivity of hydrogen-producing bacteria, for example due to lactose intolerance, has exploded due to oxyhydrogen.

    Finally, it should be noted that molecular hydrogen is only one important aspect of alkaline activated water.

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    After a few days he seems to see a little worse, could it be from the alkaline water?

    Question from Yasin Akgün to a doctor friend on July 26, 2016:

    A customer with an ECA Plus water ionizer:

    He thinks that he has the vision problem because of money roll formation

    However, now after a few days he looks a little worse, could it be from the alkaline water?

    Surely he should see better?

    I send this to him Basic formula too, he doesn't take any other nutritional supplements

    Do you have any other ideas?

    Thanks and aAll the best, yours Age

    The following is the answer from the expert, a doctor:

    dear Yasin, I can help you with that. 

    no, definitely not alkaline water. That tends to help, but it also takes time.

    Money rolling phenomenon responsible for his vision problems? I don't think anything of it...

    Basic formula is a very good idea of ​​yours.

    L-Carnosine from Zheinpharma buy 3 capsules daily. Very good for eye problems. 

    http://www.zeinpharma.com/l-carnosin-capsules

    all the best, P.

    P.S. I would recommend, Mr. H., that you wash your eyes and face with cold water in the morning and massage your eyes with your curved index fingers. This is good for the optic nerves because of the pressure from the water... Yasin Akgün

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    My Aquion water ionizer has the following defect: The control knob can no longer be turned or has become very stiff. What can I do?

    On February 26.02.2016, XNUMX, Yasin wrote:

    Hello Mr. G.,
    Thank you for your call.
    You should try it to see if the following works:
    Remove the filter and run the descaling pump through the water inlet with citric acid until it comes out of the open filter compartment.
    The whole thing for about 30 minutes and move the control knob every now and then.
    This should make it work.
    Otherwise send it to Aquion, which we can do for you quickly and free of charge

    Make sure that the citric acid runs back into the container from the filter opening where the pump is, place the ionizer on feet and at a slight angle.
    Es geht
    Let me know
    You are also welcome to call during this time
    All the best
    Yasin Akgun

    On February 27.02.2016, XNUMX, Dr. Friedrich G.:

    It worked, it works much better now, thank you very much!!!! And have a nice weekend, best regards F. Grass

    Thank you Mr G.,
    I'm happy to read that
    All the best
    Yours, Yasin Akgün

     

     

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    On December 13.12.2015, 20 at 05:XNUMX p.m. Mirko N. wrote: Yasin Akgün's answers are in red:
    Hello again,
    what reasons speak against the cheaper filters you offer? Can't the swirler be mounted on it?
    >The cheaper “Modern” filter is almost as good as the more expensive one, except that you cannot connect a swirler to the Modern filter, there is no back pressure at the end of the spout, it would burst.
    And otherwise, with the more expensive filter you can always replace the included hollow fiber membrane filter, but with the Modern it is not possible because there is only activated carbon without a hollow fiber membrane. The hollow fiber membrane guarantees that no viruses and bacteria can flow through, but the activated carbon is also a virus and bacteria filter, but not 100%
    In my opinion, without hollow fiber, thick ones are sufficient for our fairly clean water. In addition to the typical chemicals, both also safely filter out heavy metals, and that is important.

    You speak out against reverse osmosis in your videos. It is certainly a controversial topic that too much lime is unhealthy. It's certainly not beneficial in large quantities, but surely you won't suffer a deficiency in the calcium content of our food?
    >With the rabbit water, my hair grows faster, fingernails grow faster, more ear wax, etc. You keep pouring a little more alkaline minerals into the body. This is always git.
    We don't get calcified because of the water, but because of completely different issues such as acid-base imbalance, homocysteine ​​value issues, high blood pressure. The water helps against these issues.

    I hear a lot about how pollutants and slag removal works better with particularly pure (osmosis?) water because it can absorb even more substances in solution.
    >Would you wash your greasy pan with water or with soapy water. Everything you've heard is speculation from some discussants, here's the water fact creator:
    http://aquacentrum.de/video-geschichte-basisches-wasser-und-wasserionisierer/
    You can find an interview about the lecture here:
    https://www.aquacentrum.de/saq/
    The video on the right is particularly important because it contains the latest findings.

    As far as the vortex story is concerned: It is said that the “memory of the water is erased” (esoteric formulation) or that the molecular clustering is broken up. This should also make the water more soluble. There is also criticism of this theory: In liquid water, the hydrogen bonds would permanently dissolve and re-form dynamically and such a bridge would only exist in the picosecond range (then “information storage” would not be an option at all)...
    >It's all speculation to the power of 10 because people didn't understand the 73 anomalies in the water. The swirlers aren't bad, but it's only 10% of the cost of water treatment. By the way, water ionizers produce the most "turbulent" water, they are micro-vortices that arise because the electrodes are + and - charged, and since the water is a dipole, it will accordingly dissolve its previous cluster structures, forming smaller, more uniform ones.

    Mr. Asenbaum explains that alkaline activation of water is destroyed by subsequent swirling.
    Afterwards, yes, since we then let the hydrogen react early, not to nothing, but not sensible. Who before, with the UMH:
    On the following page is the UMH Pure Gold, which is mounted under a tap on the cold water pipe or in front of an ionizer:
    https://www.aquacentrum.de/shop/umh-pure-vergoldet-kalkwandler/
    The water is then 10% stronger, with an ionizer installed upstream.

    Am I correctly summarizing that there are two possibilities:
    1) A filter with subsequent turbulence. Activated carbon or reverse osmosis a religious question... Not a religious question, but would you use distilled water from the >Buy gas station and drink. That's common sense + we have the facts, look at them Lecture You're welcome.

    2) An ionizer WITHOUT turbulence.
    >Test ionization, you will feel it, whether with or without UMH, it's all a question of money and taste, as the UMH minimally makes the taste even more soft.

    The esotericist will probably reject the ionizer because the water is not swirled/levitated/disinformed or similar.
    >I'm also a bit of an "esoteric" and was against it for two years because of electricity until I got a water ionizer. Now everything is easier because with the ionizer everything is provable and measurable. That feels good. Being an esoteric means that you don't have the 2 anomalies of water in your sights, but you know that there are still many questions unsolved.

    In a video lecture, unfortunately I can't remember which one, Mr. Asenbaum answers the question of whether alkaline water is unhealthy: Due to the low buffering of the water compared to stomach acid, the pH value in the stomach practically does not change. This sounds very obvious, but raises an additional question:
    Doesn't this low level of buffering lead to a negligible impact on the organism?
    >As written above, you keep pouring more alkaline and less acidic minerals into the human water bag. In the long run you will feel the difference:
    Less bad breath and more fitness. The lecture and the FAQ section can be found here: https://www.aquacentrum.de/saq/

    What speaks against simply stirring baking soda into drinking water? http://phkillscancer.com
    I have already done this in the form of a treatment and achieved a urine pH of >9.
    >Urine pH-9 could mean many things, including your body getting rid of excess minerals, and it could also mean you have a kidney problem. Urine is not useful, the saliva test is the most useful because it shows the current pH value of the interstitial fluid, the extracellular fluid.
    The rabbit concentrates are better than nothing, but then the hydrogen is missing. He does the following, using the example of a high-performance athlete:

    Lactic acid, which is always problematic in high-performance sports, is broken down more quickly by drinking alkaline water, thereby increasing overall performance.

    In addition, high-performance sports produce a particularly large number of reactive oxygen species (free radicals), which can be neutralized by the high hydrogen content of the active water. In this way, damage to the tent due to overexertion can be avoided.

    Furthermore, taking any sports nutrition, such as protein-vitamin-mineral powder, etc. with the help of alkaline active water two things:

    Firstly, this increases the absorption capacity.
    Secondly, the high hydrogen content and the alkalinity of the mixed mixture enable faster metabolism of these nutritional supplements.
    Of course, the same applies to fruit juices and vegetable juices that are mixed with fresh alkaline active water.

    If you eat a diet rich in fruits and vegetables, it is also recommended that you soak them in fresh alkaline active water about 15 minutes before consumption, as this can reverse the oxidative aging caused by long storage and long transport distances, and these fruits in their entirety Food quality can be revitalized and its quality improved by the effortlessly penetrating hydrogen.
    By the way, pickling even works with whole eggs because the eggshell is permeable to hydrogen.
    However, eggs should be left in for 20-30 minutes.

    I hope I don't get on your last nerve, but I don't want to regret the investment and make a qualified decision first. Unfortunately, the experts are extremely divided...
    >Unfortunately, there is no expert community, but rather speculative discussants who all claim something and firmly believe in it, and state it so credibly that you as an interested party also believe it.
    The experts, the only one in Europe, is Mr. Asenbaum, unfortunately everyone else is just some scientists who have simply accepted the 73 anomalies and do not question them.
    In the USA there is still the EZ-Water researcher, Gerhard Pollack:
    http://faculty.washington.edu/ghp/

    But otherwise, unfortunately, “real” water researchers can only be found far and wide in Asia and Russia, but there is also the language barrier...

    Hope the red answers help you.
    I look forward to further questions
    Yours, Yasin Akgün
    Kind regards, Mirko N.

     

    Back to the FAQ database

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Karl Heinz Asenbaum answers an email with various general statements about alkaline, hydrogen-rich water as follows

    • The similarity between electrolytic activated water and Lourdes, Tlacote, Nordenau is absolute nonsense. None of these sources have an increased pH value, a low redox potential or a special hydrogen content. At least when you bottle them. I've been to Nordenau myself. There is nothing measurable to be found there.
    • During electrolysis, the water is not converted, but reduced. This has nothing to do with biology. It has to do with organic chemistry, which always has to do with carbon.
    • The Reduced Water is not antioxidant and electron-rich, but rather selectively antioxidant and willing to donate electrons under certain circumstances.
    • Reduced water is not necessarily alkaline. it can also be acidic.
    • When it comes to swirling, the only thing that matters is what is being swirled with. You can't make hollandaise sauce without butter. Without hydrogen there is no reduced water. If you swirl with atmospheric oxygen, you destroy the hydrogen and only water is created.
    • Bioavailable minerals are as stupid as fat-free butter. a pure advertising slogan for idiots. Minerals in water are always bioavailable because they are ionized. Any living being, whether plant, animal or human, can absorb them very easily. No special water is required. It's just better if there are more mineral ions in the water that we particularly need, for example calcium and magnesium. These are increased in alkaline active water.
    • Alkaline activated water is not rich in (dissolved) oxygen, but rather extremely poor. But it has maximum dissolved hydrogen content. Because of the many hydroxide ions, there is more molecular oxygen than in normal water, but this is actually of no use to anyone, as hydroxide ions are extremely inert and are reluctant to release their oxygen.
    • The activated water tastes better not because of its “fine clustering”, but because of its increased proportion of dissolved hydrogen gas. Hydrogen gas is the end product towards which all cell metabolism strives. When you get it on your tongue for free, there is a taste sensation that leads to the feeling: drink more of it. Water clusters change about 1 million times faster than taste sensations. In this context they are completely meaningless and just an advertising claim from yesterday's manufacturers.

    Among the 11 reasons given for alkaline water

    1. Hydrogenation:
      Activated water does not have smaller clusters when it reaches the body or cells. Coffee and tea solubility outside the body also increases not through smaller water clusters, but through the action of hydrogen. Tea and coffee dissolve very well in boiling, very large-clustered water!
    2. Lose weight:
      Depends entirely on low-calorie diet. It doesn't matter whether I drink activated water or normal water - both calorie-free. It is possible, but not proven, that people lose weight through minimal hydrogen intake or become less hungry as a result.
    3. Anti-Aging:
      Activated water has no excess electrons. Its strongly negative redox potential is based on hydrogen gas, which has weak electron binding forces and therefore donates its electrons as “victims” to the strongest free radicals such as the hydroxyl radical with its particularly strong positive potential. Less strong free radicals, which we also need for immune defense, are not affected. Therefore, hydrogen does not harm our immune system. It is true that “used” antioxidants such as vitamin C can be recharged by excess hydrogen after consumption.
    4. Detoxify
      Thank you and hallelujah. These statements are simply stupid and have absolutely nothing to do with poisons and detoxification.
    5. Cardiovascular blood pressure
      These studies are not mentioned and are not known. Alkaline activated water increases blood pressure because it is absorbed more quickly. In addition, cholesterol values ​​that are too high are not reduced.
    6. Blood pH
      Urine pH constantly fluctuates by far more than one pH. None of the studies are specified. Darkfield analysis of clumped erythrocytes can also be improved by drinking acidic water within 15 minutes. The effects on the blood plasma that occur after drinking alkaline active water are much more important. They can become visible between two days and two years.
    7. Bone
      The pH value in the body can hardly be influenced directly by alkaline active water. Hyperacidification is better combated medically by avoiding acid absorption than by compensating for it with alkalis, since neutralization in turn creates waste products, which are the main health problem. The fact that alkaline active water apparently helps with osteoporosis has not yet been sufficiently researched. It doesn't necessarily have to do with the increased content of calcium ions, but can also be related to hydrogen-induced gene switches. we know it works, but not why.
      Hepatoprotection
      This is basically true, but it should be detailed, as in the well-known studies that I list on page 394 ff of my book “Electrically Activated Water”.
    8. indigestion
      This is probably unintentionally true. The term activated water includes both antioxidant and oxidative active water. (these are the more current terms instead of alkaline and acidic activated water) If you have colitis and other inflammations, I would advise against antioxidant activated water, but it certainly helps with constipation if you are not stupid enough to swallow swelling agents at the same time.
    9. brush up
      This happens via hydrogen transfer. pH-neutral active water with lots of hydrogen is sufficient. Hydrogen content lowers the redox potential and this is what is important in assessing the quality of food in terms of freshness. The water for refreshing should not be too alkaline (> pH 11), otherwise fat-soluble viramines will be washed out.
    10. Fitness
      Basic misconception: Sore muscles have nothing to do with lactate. It is caused by mini muscle tears. Alkaline activated water can only accelerate the breakdown of lactate, not reduce muscle soreness. However, there are a number of studies about the usefulness of hydrogen in water during sports.

    Link to FAQ post

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Body alkaline

    Dear Mr. Akgün 

    I'm really happy that the machine arrived at my dad's today! Yay 🙂 

    How long do you think it takes the body to become alkaline again? If you eat the same (unhealthy) diet as usual? 

    Very kind regards, Susanne M.

    Hello Ms. M.

    Thank you for your very kind regards.

    How long does it take for the body to become alkaline?

    That's a good question, but not an easy one to answer, in my opinion. Especially without making any healing claims.

    If you dem saliva test follows, it takes about 10 minutes on an empty stomach to shift the pH value in saliva to pH7. Without alkaline water it is pH6 for me, and when I drink a schnapps it is even pH5,5. Since the saliva comes from the lymph fluid, i.e. the fluid where the cells practically bathe, the fluid between the cells, I can assume that I am more alkaline as a result. When I drink, my subjective sense of taste in my mouth also shifts towards pleasant and lots of saliva, instead of a dry and strange taste. See this Spoke test video contribution from Mr. Asenbaum.

    When it comes to alkaline water, we don't have a strongly buffered base like caustic soda or similar. It is a weakly buffered base. The point here is that in the long term you have “poured” less acidic minerals from the water into yourself, but rather more alkaline ones. In the long term, this should bring the body its balance, which is why we offer it six-month satisfaction guarantee, which means that everyone shouldn't expect changes in 2 weeks, but should give themselves six whole months - drinking calmly and noticing that they don't actually want to drink any other water anymore, or even refuse it.

    I drink little water on vacation, also to see how I react compared to Germany, with the alkaline water. However, on our last vacation we had the Blue 700 hydrogen generator with us, so we enjoyed drinking water. Without hydrogen dissolved in the water, the water no longer tastes good to us.

    Back to your question: I think everyone should feel it for themselves by drinking enough, i.e. at least 2 or even 3 liters, every day and seeing what changes. It is best documented in writing or even better via video. Because then we are particularly willing to offer discounts for replacement filters or the next ionizer.

    Hope I could help you further. All the best from Munich, Yasin Akgün

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    Hello Mr Akgün,
    our “Lydia” works to our complete satisfaction.
    The water it produces tastes good and is good for you. (For example, my wife's skin has become noticeably softer, my condition when cycling and climbing stairs is better and a wart on my thumb that I have been working on for several years disappeared within 3 weeks without any further action...) 

    Some of our friends have already become very interested after they tried the water with us and we told them about it. As far as I know, someone has already inquired about or even purchased something from you. I am happy for you.

     Now there are always critical spirits out and about and they absolutely have to find out that everything is just hocus-pocus. This is of course challenging, especially if you only feel and know that you are doing good for yourself, but cannot refute everything straight away as a layperson.So here is a link to an “open letter” from Mr. Martin Keymer, which was presented to me…. Can Mr. Asenbaum perhaps comment on this in the “Knowledge” section of your homepage? Or does he already have it and I just haven't found it?

    Statement on ionized, alkaline water: Therapeutisches Haus Martin Keymer: http://therapeutisches-haus.de/2014/08/13/stellungnahme-zu-ionisiertem-basischen-wasser/ 

    Thank you and, Best regards from Kiel, Dirk T.

    Reply from Yasin Akgün on May 24, 2016

    Hello Mr. T.,

    thank you for your recommendations. May I offer you the Blue 700 as a gift:

    www.aquacentrum.de/shop/aquacentrum-blue-700-hydrogen-water-maker-hrw/

    Otherwise, because of the stomach acid issue, the following video will clarify: www.aquacentrum.de/faq/

    If everything is different than shown in the typical speculative article, more information on the FAQ page, just search. Hope this helps you

    Otherwise also the book: www.aquacentrum.de/elektroaktiviertes-wasser-ebook-kostenfreier-download/
    Here is the direct download: www.aquacentrum.de/downloadlink-e-book-elektroaktiviertes-wasser-von-karl-heinz-asenbaum

    All the best from Munich

    Yours, Yasin Akgün

    Leave a Comment

    Your e-mail address will not be published. Required fields are marked with * marked

    The FAQ interview video about alkaline active water with Karl Heinz Asenbaum also deals with the sometimes very speculative dissenting voices against alkaline activated water.

    It explains the most important questions and answers that still raise doubts, such as the topic of alkaline water and stomach acid.

    Below you can see all the questions and answers we have collected about the dissenting voices and opponents of alkaline water and you can also search our FAQ database.

    To view the lecture that preceded the interview, please fill out the web form. 

    FAQ video | Alkaline active water | Stomach acid and much more


    [no_wpautop]





     


    [/no_wpautop]