AquaVolta® HOClean 120@5pH - Mobile ECA Water Generator

• Power: 500W
• Flow rate: 1.5L/min
• pH-Value: Anolyt: pH 2.0-8 (adjustable),
  Katolyt: pH 7-12.5 (adjustable).
• Available chlorine: 500-600ppm
• ORP:  >1100mv
• Chlorine ion content:  <1000mg/L
• Size: 550 X 420 X 240mm

• Voltage: AC120v/60HZ
• Rated Power: 400W(MAX)
• Water Source: RO Pure water + NaCL, TDS on 800±50ppm
• Working Water pressure: 0.1-0.3Mpa
• Source Water Temp: 5-40°C
• Quantity Of Plates: 12 plates* 1sets
• Net Water Flow: 2L/min
• Adjustable pH Value: 2.7-11

Installation and equipment use:

MODE A

1. According to per 1L RO with 105 grams Nacl to mix well together , put the PE tube into the prepared salt water tank, and connect to salt water inlet of the equipment.
2. The PE tube at the water inlet connects the water pump to the RO water and connects the power cord of the water pump.

Behind the AquaVolta HCLO Mini

• Inlet: When Mode A is inlet Pure RO water,
  Mode B is inlet tap water /Water Purification.
• Salt water: Inlet salt water
• Acidic: Acidic water outlet, The reversal of the poles outlet alkaline water.
• Alkaline: Alkaline water outlet, The reversal of the poles outlet acidic water.
• Pump Power: Connect the water pump power line
• Power: Power supply.
• Connect alkaline and acidic water PE tube.
  Press the ON/OFF and salt water button to start the equipment.
  Note: that the flow rate is controled at 2.0L/MIN.
• The electrolytic strength can adjust the PH value of Water.
• pH value range of effluent:
  Acidic pH: 2.7-3.0.
  Alkaline pH: 10-11.