Installation de l'ioniseur d'eau
Water filter installation variants using the example of water ionizers
Over the counter: at the tap or fixed | Under the counter
- Either one installs the above-mentioned device at the tap, which is the easiest variant that anyone can do without a plumber
- Or the water ionizer or water filter standing or hanging on top gets its water supply line using a T-piece (DVGW-tested). For this purpose, a 6.35 mm feed-through or drill hole must be provided so that the white pressure hose can be transported upwards to the water ionizer or water filter. This installation should be carried out by a craftsman or sanitary specialist. The third, most preferred option is the under-sink installation, but this requires a 35mm hole (typical for taps) for the additional, second control tap.
- However, we have been able to install it in every kitchen so far, even if it may look impossible at times. The AquaVolta EOS Revelation is preferable as an under-sink water ionizer, as it is the only one that uses a sophisticated automatic descaling system. The EOS Revelation can also be placed flat on your stomach under the sink (or in a cupboard at the top) or hung up.
Video about the installation possibilities of water filtration systems such as water ionizers, activated carbon filters and reverse osmosis systems.
Installation Water ionizer | Water filter