Screw-on connector | 3/8” or 1/2” inch thread (IG) | Plug-in part 1/4” hose (quick fitting)

4,70 

  • Screw-on connector internal thread (IG): 3/8” (15 mm) please select in the selection window, or
  • Screw-on connector internal thread (IG): 1/2” (18,5 mm), please select in the selection window, or
  • Screw-on connector internal thread (IG): 1/4” (11,7 mm), please select in the selection window.
  • Connector (quick fitting): 1/4″ (6,35 mm, outside diameter hose)
  • Colour: white
  • Incl. thread seal
  • Suitable for fluid and air applications

Connector 3-8'' inch thread female - plug-in part 1-4'' hose - Quickfitting 400
Screw-on connector | 3/8” or 1/2” inch thread (IG) | Plug-in part 1/4” hose (quick fitting)
4,70 
Business hours: Monday through Friday 9-20 clock

Screw-on connector | 3/8” inch (15mm), or 1/2” inch (18,5mm), or 1/4” inch (11,78mm) thread (IG) | Plug-in part 1/4” hose (quick fitting)

Procedure for installing the quick-fitting connectors:

Connecting the Ø 6,35 mm (1/4”) system

Cut the pipe squarely and without burrs and ensure that the pipe has no sharp edges, longitudinal grooves or other damage. Insert the pipe into the quick fitting as far as it will go. The holding element fixes the pipe in the connector. The O-ring creates a permanently tight connection.

Check the connection by counter-tightening

Check that the pipe is inserted securely. This is easily possible by counter-pulling.

Disconnecting the Ø 6,35 mm (1/4”) system

Check that the system is depressurized. The pipe can then be loosened or removed by pushing back the holding element.

Quick Fitting Prepare Connector 1-4 Inch Hose
Loosen connector 1-4 inch hose

Reviews

There are no reviews.

Be the first to review “Screw-on connector | 3/8” or 1/2” inch thread (IG) | Plug-in part 1/4” hose (quick fitting)”

Your e-mail address will not be published. Required fields are marked with * marked