Screw-in connector | 3/8” or 1/2” inch thread (AG) | Plug-in part 1/4” hose (quick fitting)

4,70 

  • Straight screw-in connector 3/8" inch thread for 1/4" inch reverse osmosis/water ionizer hose
  • Material: polypropylene
  • Dimensions: 36 x 20 mm (LxW)
  • Thread: 3/8” inch or 9,525mm or 1/2” or 12,7mm (please select in the selection window)
  • Hose connection: 1/4” inch – 6,35 mm
  • Pressure: max. 9 bar at 20°C water temperature
  • Suitable for 1/4” or 6,35mm reverse osmosis systems or water ionizers

Connector 3-8'' inch thread AG - plug-in part 1-4'' hose - Quickfitting 400
Screw-in connector | 3/8” or 1/2” inch thread (AG) | Plug-in part 1/4” hose (quick fitting)
4,70 
Business hours: Monday through Friday 9-20 clock

Screw-in connector | 3/8” (9,525mm) inch thread (AG) or 1/2” (12,7mm) | Plug-in part 1/4” hose (quick fitting)

Screw-in connector                                 1/2 male thread to 1/4 inch hose 400

Procedure for installing the quick-fitting connectors:

Connecting the Ø 6,35 mm (1/4”) system

Cut the pipe squarely and without burrs and ensure that the pipe has no sharp edges, longitudinal grooves or other damage. Insert the pipe into the quick fitting as far as it will go. The holding element fixes the pipe in the connector. The O-ring creates a permanently tight connection.

Check the connection by counter-tightening

Check that the pipe is inserted securely. This is easily possible by counter-pulling.

Disconnecting the Ø 6,35 mm (1/4”) system

Check that the system is depressurized. The pipe can then be loosened or removed by pushing back the holding element.

Quick Fitting Prepare Connector 1-4 Inch Hose
Loosen connector 1-4 inch hose

Reviews

There are no reviews.

Be the first to review “Screw-in connector | 3/8” or 1/2” inch thread (AG) | Plug-in part 1/4” hose (quick fitting)”

Your e-mail address will not be published. Required fields are marked with * marked