Inline activated carbon filter cartridge with functional filter ceramics

37,00 € - 47,00 €

For use as standalone water filter of tap water,
or after a reverse osmosis system or water filter
or before a water ionizer or water filter
Water filtration with activated carbon granules & functional ceramic balls
Duration of use for 6 to 12 months after first contact with water, the longer the duration of use, the weaker the pH values & H2 contents achieved
recommended max. flow: 1,5 liters/minute, the slower the better
Empty weight: 0,6kg; Total weight filled with water, 1,1 kg
Pay attention to flow direction! Can be mounted horizontally or vertically

Two variants to choose from: 1. Only spin-on filters without connections
2. pre-assembled with all connections (2x angle connector, 1x shut-off valve, wall brackets, screws and dowels)

product variant

Empty

Article number: FU-Minerade-1 Categories: Undersink filter, Replacement filter, reverse osmosis systems Schlagwörter: bioceramic, biocera, redox, potential, antioxidant, PH value, cartridge, post-mineralization, bioceramics

Minerade® multifunctional inline activated carbon granulate filter including functional filter ceramics for filtering chemicals, heavy metals, bacteria

Activated carbon granulate filter including multifunctional filter ceramics - wall mounted

Activated carbon granulate filter including multifunctional filter ceramics - background

for installation BEFORE water ionizers, reverse osmosis systems, distillation systems, steamers, ice and beverage processors, etc. or AFTER reverse osmosis systems, water filters, etc.

Filtering common chemicals, pollutants, heavy metals and bacteria
pH neutral: the pH value of the water is not affected
NO enrichment of the water with minerals or mineral salts
Protection against germination in the water filter after long periods of standstill or
Filtering of warm water up to 50°C or warm ambient temperatures

Composition of the filter media and functional ceramics:

Filter fleeces to retain suspended matter and sediment
Activated carbon granules made from flaked coconut shells
for the adsorption of chemical substances such as organic substances, drug residues, hormones, pesticides, hydrocarbons, petroleum degradation products, microplastics, glyphosate and much more
Calcium sulfite and magnesium oxide for chlorine removal of over 99% and protection against germination during long periods of use
Microporous, antibacterial silver-ion ceramic to protect against germination during long periods of use and to kill microorganisms: e.g. up to 96% E.Coli, Staphylococcus aureus
Highly pure (99,8-99,9%) KDF 55 copper/zinc alloy for removing lead, cadmium, chromium, arsenic, mercury, nickel, aluminum etc.

Technical data activated carbon granulate filter including multifunctional filter ceramics – assembled

1/4'' (6,35mm) quick fitting connection socket
Maximum flow: 3 liters per minute
Maximum pressure: 10 bar, water temperature: 5°C – 50°C

Installation and Notes

Pay attention to flow direction! Can be mounted vertically with the entrance at the top or bottom or horizontally.
Hygienic and practical filter change every 6 months according to DIN standards and/or after 3000 to 5000 liters
No disinfection necessary as the entire inline filter is replaced.
Shut off the water supply before operating breaks longer than 1 week!
With this filter, use one for all filter systems Leak stopper!
Important BEFORE a water ionizer or BEFORE a reverse osmosis system:
Rinse the filter clear for approximately 5 minutes before installing it firmly.

Label | Minerade® Carbon filter, activated carbon filter with multifunctional ceramics

Inline activated carbon granulate filter including multifunctional filter ceramics

Activated carbon granulate filter including multifunctional filter ceramics - mounted

Reviews

There are no reviews.

Be the first to review “Inline activated carbon filter cartridge with functional filter ceramics”