Reducer 1/4” x 1/4” – quick-fitting connector, with or without screen filter
- Pressure ranges using the working temperature: 15 bar at 20°C, 8 bar at 65°C
- Quick fitting for easy attachment and detachment.
- NSF-61 certified
- The version with a mesh filter is preferable. Upon arrival: It has a yellow ring on one side
Reducer 1/4” x 5/16” – quick fitting connector
- Pressure ranges using the working temperature: 15 bar at 20°C, 8 bar at 65°C
- Quick fitting for easy attachment and detachment.
- NSF-61 certified
Reducer 1/4” x 3/8” – quick fitting connector
- Pressure ranges using the working temperature: 15 bar at 20°C, 8 bar at 65°C
- Quick fitting for easy attachment and detachment.
- NSF-61 certified
Procedure for installing the quick-fitting connectors:
Connecting the Ø 6,35 mm (1/4”) system
Cut the pipe squarely and without burrs and ensure that the pipe has no sharp edges, longitudinal grooves or other damage. Insert the pipe into the quick fitting as far as it will go. The holding element fixes the pipe in the connector. The O-ring creates a permanently tight connection.
Check the connection by counter-tightening
Check that the pipe is inserted securely. This is easily possible by counter-pulling.
Disconnecting the Ø 6,35 mm (1/4”) system
Check that the system is depressurized. The pipe can then be loosened or removed by pushing back the holding element.
Reviews
There are no reviews.