Siphon clamp for 1/4” sewage hose (6,35mm)

17,00 

  • The universal flushing water spout can be screwed onto pipes of various diameters up to approx. 53 mm
  • The included connector is suitable for 1/4” pressure hoses as known from water ionizers or reverse osmosis systems or other water filters
  • A hole with a diameter of 6 – 8 mm is drilled into the drain pipe above the S-piece of the siphon.
  • The clamp is mounted on the drain pipe (usually a 30mm pipe).

Available

Siphon clamp: Universal flushing water outlet for 1/4” wastewater hoses from water ionizers or reverse osmosis systems

The siphon clamp is a device for connecting the wastewater hose (rinsing water) of a reverse osmosis system to the drain (siphon).

A hole with a diameter of 6 – 8 mm is drilled into the drain pipe above the S-piece of the siphon.
The siphon clamp is mounted on the drain pipe (usually a 30mm pipe). The maximum diameter of the siphon in this model can be 53mm outside diameter. Larger diameters are not possible.

Siphon clamp for 1-4 inch 6-35mm hose - wastewater - reverse osmosis 600

Reviews

There are no reviews.

Be the first to review “Siphon clamp for 1/4” sewage hose (6,35mm)”

Your e-mail address will not be published. Required fields are marked with * marked