This product is currently not available.

Envirolyte ELA 200 Generator - ECA Water

Price after request

Delivery time 20 Workdays

  • Easy and safe to use
  • Efficient: reduced sterilization contact time
  • Self-cleaning
  • Biodegradable fluids
  • Anolyte doesn’t harm the original, natural properties of the water
  • High level of safety: no hazardous chemicals produced or used.
  • Some automation and easy operating procedures give the added benefits to rapid delivery of safe and fast acting disinfectant – Neutral Anolyte.
  • The strength of Neutral Anolyte in terms of active chlorine concentration can be adjusted.
  • The control system of ELA units is simple and easy to operate. It can be altered to suit different applications and conditions
  • A flow controller is installed in the Hydraulic part to shut the Envirolyte unit off if there is an interruption in the water supply and to start the unit as soon as water flow resumes.
  • A simple on/off switch with power indicator starts and stops the ELA units manually.
  • Level switches enable to start and stop ELA units automatically.
  • SW10130
      Overview and specifications for the Envirolyte ELA 200...
Read More
Product information "Envirolyte ELA 200 Generator - ECA Water"

Overview and specifications for the Envirolyte ELA 200

  • Output capacity: 20 LPH of ANK-Neutral Anolyte ONLY with possibility for Catholyte isolation for Ph correction of ANK or Acidic Anolyte and Catholyte with controlled ratio between the two fluids
  • FAC (Minimum): 500 ppm
  • Water supply: 2 bar
  • Salt consumption per 1 liter of Anolyte: ~2.5 g depending on the source water
  • Power source: 220V AC / 110V AC
  • Power consumption: ~0,5 KW/H
  • Flushing mode: Semi automated
  • Brine pump: +
  • Acid pump: +
  • Type of cell: R-20
  • Piping & fittings: LLDPE tubing & Kynar
  • PLC control: Unitronics/Jazz
  • Cabinet(s) size & material: 400 x 300 x 180 – Polyester
  • Weight ~ 10 kg.

The Envirolyte units have been developed to automatically produce activated solutions of different types and strength and to act as an independent unit or for use in a continuous process in a more complex system.

On-site production of solutions for cleaning, disinfecting and sterilizing. Envirolyte ELA units are designed to generate, on-site, cleaning, disinfecting and sterilizing solutions out of 0.05% – 1.0% salt brine (NaCl or Kcl).

The units electrolyze the salt water and, using polymer or ceramic membranes, separate the positive and negative ions. As a result of these electrochemical reactions various types of activated solutions are produced. The purpose is to control and/or eliminate pathogens such as bacteria, viruses, spores, mold and fungi, as well as cleaning and removing heavy metals. The merits of chlorination as a means of destroying pathogens is firmly and universally established. In recent years, however, the appearance of resistant strains of bacteria, the discovery of Legionella, plus other problems associated with chlorine compounds have promoted an interest in alternative water disinfection technologies. Envirolyte technologies produce chlorine based compounds but with significant reduction in cost, danger and ecological impact.


To be used:

  • For water systems
  • Industrial cleaning and disinfecting
  • For health care
  • In the medical profession
  • For veterinaries
  • In the poultry industry
  • In pig farming
  • In dairy farming
  • Horticulture/agriculture
  • Waste water
  • Cooling towers
  • Breweries
  • Food processing
  • Swimming pools

Microbiological testing

Independent testing

Envirolyte systems and generated solutions (anolyte and catolyte) have been put through extensive series of independent tests and on-site trials including hospitals, breweries, water systems and agricultural environments.

Safer world

Being environmentally friendly, completely safe, non-toxic and non-irritant Anolyte is welcome where traditional chemicals fail to produce the desired results or can’t be applied at all.

Better alternative

The conclusions prove that Anolyte being a low-cost and powerful disinfectant is set to become the preferred solution for many sterilisation, disinfecting and water purification procedures.


Neutral Anolyte

ANK-Neutral Anolyte solution is used wherever pH is important (e.g. corrosion) and where possible evaporation of active chlorine cannot be avoided. Neutral Anolyte is highly effective against a broad range of pathogens including bacteria, viruses, spores, mould and fungi.

Product: Neutral anolyte
Active chlorine: 500mg/L – 850mg/L
PH value: pH5 to pH8,5
ORP: +700mV bis +900mV

Catholyte solution

Catholyte Solution is alkaline and serves as an excellent washing liquid, plus it removes heavy metals from water through precipitation.

Product: Sodium Hydroxide
PH value: pH10 to pH13
ORP: -900mV bis -950mV

Acidic anolyte

Acidic Anolyte solution can be used wherever there is a need to disinfect or sterilize in applications where the pH is unimportant and where there is no danger of corrosion. Acidic Anolyte is a very powerful and fast acting disinfectant against all bacteria, viruses, spores, mold, fungi and algae even when it is diluted in water or sprayed in the air.

Product: Acidic anolyte
Active chlorine: 500mg/L – 700mg/L
PH value: pH2,5 to pH3,5
ORP: +1000mV bis +1200mV


Every Envirolyte unit can be set to generate either ANK- Neutral Anolyte only with isolation of a certain volume of Catholyte for Ph correction of ANK or Acidic Anolyte and Catholyte only. Setting of the unit for production of specific fluids is done at the Envirolyte factory.


The anolyte solutions:

  • Are environmentally friendly
  • Are non-toxic to both humans and animals
  • Do not require special handling
  • Are powerful biocides

Typically, anolyte produced by an Envirolyte unit is collected in a container and then dosed into the incoming water. The dosing regime depends on the water flow and quality (properties) of the water and is controlled by a flow meter connected with a dosing pump. The units can stand alone (e.g. for spraying, hand cleaning, CIP disinfection, etc.) or they can be used as part of a continuous process in more complex system. Design facilities are available for customized units.
In addition, anolyte application, as a hard-surface disinfectant on a daily basis for more than ten years, demonstrated that microorganisms do not develop resistance against anolyte over time.

Related links to "Envirolyte ELA 200 Generator - ECA Water"

Read, write and discuss reviews...
Read More
Customer evaluation for "Envirolyte ELA 200 Generator - ECA Water"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

I have read the privacy policy
AquaVolta® EOS TOUCH Water Ionizer AquaVolta® EOS TOUCH Water Ionizer
From €1,970.00 * €2,070.00 *