AquaVolta® EOS Revelation II installation video
Under the counter device with two XXL activated carbon filters and electrolysis of water | Alkaline hydrogen water
Latest technology and high quality workmanship are the trademarks of the AquaVolta® EOS Revelation II.
Visible hoses are not an issue with this under the sink ioniser. This makes it perfect for the designer kitchen.
Hardly any other water ionizer can keep up with the clear arrangement of the Touch Buttons (Touch Control sensors) and the information displayed on the very fine display screen with regard to user comfort and design.
The pre-programmed pH and redox values in the display can be adjusted precisely by the user to the actual measured values.
The filter use for both filters is displayed separately in the screen. It means you always have an overview of your water consumption.
The AquaVolta® EOS Revelation II along with the AquaVolta® EOS Genesis has for a long time been our bestseller with a minimal return rate.
Overview and Specifications for the EOS Revelation ll Under the Counter Water Ionizer with 9 Electrodes
- Price/performance ratio: Excellent: many high end functions leave nothing to be desired, high quality workmanship, including a 14-day free trial period, when you buy, a 182 day satisfaction guarantee. In addition, 4 x 2 liter glass bottles as an encore
- Electrodes: 9 titanium electrode plates, galvanic coating 3 times with the catalyst Platinum ( layer thickness: ca. 0,25 µm), effective electrode surface: 1336,5 cm²
- Amount of filter cartridges: 2 silver steamed activated carbon filter cartridges, including Calcium Sulphite and Tourmaline, price of each replacement cartridge: € 67.00
- Decalcifying mechanism: Automatic cleaning after 10 liter use
- Max. pH- / Redox values with 0,7 liter / min. Alkaline ionized water (not supply water) and °dH18:
Even with calciferous Munich water, pH value: up to 11 pH
- Oxidation Reduction Potential (ORP): ca. -650mV (nearly 1 Volt electron surplus)
- Installation: Under the sink installation with a supplied 3/8 ‘T-piece (DVGW tested) fixed to the cold water pipe
- Display data: ionization level, water flow, already flown out liters from alkaline outlet for filter 1 and 2, pH & ORP (pre-programmed, adaptable or switched off).
- Activation: By ON-OFF touch control (magnetic valve)
- Flow regulation: Optimal: 1.7 liters / min.
Input water flow is reduced by the fixed installation on the tee valve. If connected to the tap, the supplied diverter valve on the flow regulator reduces the total flow supplied through an input valve
- Warranty: 7 years full warranty because we are confident!
- Size (H x W x L) : 340 x 340 x 150 mm Drill hole for faucet: 35 mm, height of faucet: 258mm; height fastening screw thread: 50 mm, screw thread diameter: 34mm, socket diameter: 64mm, separation of small outlet tap from base edge: 62mm, total length of small outlet tap: 80mm, total length of big outlet tap: 140mm
- Release Year: 2008, large manufacturers from Seoul, Korea with more than 8 years of experience, the best in our opinion
The following products you receive automatically when purchasing this device:
Citric Acid to Descale 500g( × 1 )
Eden Descaling Pump for Water Ionizer( × 1 )
T-Piece John-Guest Angle Shut Off Valve 3/8″ x 1/4″ with Backflow Prevention According to Din-Norm( × 1 )
ebook | Electrically Activated Water | 164 pages( × 1 )
Water bottle 2 liters incl. screw top Aquacentrum( × 4 )
Display of the pH values, the ORP & the water flow rate
The pre-programmed pH and Oxidation Reduction Potential values shown in the display can be neatly fine tuned to the user’s wishes. Alongside a lot of useful information you will also be informed of the remaining filter capacity of both filters in liters on the display.
Few other ionizers can keep up with the design of the very noble display which features the indicated information and clearly arranged Touch Buttons (touch operating sensors) with regard to comfort.
We know the previous models, the Bionlite Platinion Classic with 5 platinum coated titanium electrodes and the Bionlite Platinion X-Cell Ultra with 7 electrodes, a very good one, at least since 2009. Until now for all these years we have maybe had 2 defect devices and this compared to other water ionizer brands is extraordinarily low.
Filter display | The remaining filter capacity of both filters are shown on the display
The filter run times are displayed for both filters separately on the display and show the exact amount in liters. So you always have an overview of how much water you have used or how much water you can still consume until you should replace one of the two filters.
Once a filter change is required, you will be alerted visually on the display and the voice prompter will inform you as well that a filter change is needed.
Second installation video in Dubai of this device:
The AquaVolta® EOS devices produce, in our opinion, something that all the other devices do not; extremely tasty water.
I can proudly claim that generally almost all clients find this alkaline, activated water has an excellent taste.
Why don’t you try for yourself. You are able to test free of charge with our customer satisfaction guarantee.
Extremely powerful with a total of up to 500 watts of power
Thanks to the high maximum power of the AquaVolta® EOS Genesis II, also a high flow rate can be adjusted by up to 500 watts of possible maximum output instead of the usual 90 to 120 watts of ionizers.
This means the EOS Touch water ionizer is also the strongest in performance and is suitable for the catering sector.
In an idle state, you can also turn the ionizer off at the main switch if conscious of the environment, or leave on the standby current. The technique does not harm it.
The EOS Revelation Ⅱ: A Remarkable Machine – Our best Water Ionizer
Contemporary design: The Revelation’s sleek and modern design easily fits in with your home décor.
2 high capacity filters: 2 filters have long lifespans, cutting down on the cost per gallon. It is recommended that these filters be replaced once a year with average use, or when the filter life remaining reaches 70 liters – whichever comes first.
10 preset pH levels: Five alkaline water settings (8.5pH, 9.0pH, 9.5pH, 10.0pH and 11.0pH:Turbo function), one pure water setting (filtered only), and four acidic water settings (6.0pH, 5.0pH, 4.0pH and 3.0pH) all with a convenient button selection system.
76 programmable pH and ORP levels: The Revelation II enables you to program nearly any pH and ORP combination for the pH level that’s right for you. This feature is essential due to the wide range of tap water quality in North America. Non- programmable ionizers cannot adjust to local tap water conditions, so these ionizers are at the mercy of your tap water and a handful of pre-set pH levels.
The actual pH levels of non-programmable ionizers can vary greatly from the pH levels posted on the control panel of the unit. Simply put, when used in two different cities, a non-programmable ionizer will typically get two completely different pH level outputs when kept at the same pH setting.
Complete auto-diagnosis system: The Revelation II continuously monitors all internal operating systems, ensuring that you are immediately notified in the unlikely event of a problem.
Automatic cleaning system: The Revelation II monitors plates for contamination levels and initiates cleaning cycles automatically when needed.
Automatic draining system: Drains water into the electrolysis cell system and filter to enhance full system cleaning and greatly extends the lifespan of the machine.
Automatic pH and ORP control: The RevelationII controls the pH and ORP of your water by adjusting the ionization according to the mineral content of your tap water. This allows the ionizer to estimate and display the pH and ORP of your water.
Stainless steel adapters: Unlike the plastic adapters which are used in other systems and are prone to problematic leaks and the subsequent need for replacement, the Revelation II comes equipped with stainless steel attachments for your faucet or cold water line.
Composition of filter 2 | Active carbon granules and silicon ceramic balls
Nine slotted electrode titanium plates, triple galvanic coating
The platinum-coated titanium electrode ( plus-minus pole ) performs the fundamental role of separating purified water into alkaline and acidic ionized water.
However, enormous differences prevail in alkalinity and quality of activated water with various water ionizers.
This is achieved completely by the thickness and type of platinum – titanium coating ( galvanically applied or sprayed ) and the number of electrodes.
Each of the 9 electrode is galvanically dip-coated solid three times with deposited layers of platinum.
Unlike water ionizers with 5 or 7 electrodes, the 9 electrode ionizer is also suitable for very hard tap water over 27 ° dH. With hard water, values up pH10,5 and higher are reached safely and consistently.
An additional advantage of the platinum titanium coating is that it enables a high electrical conductivity which allows the electrolysis in the water flow to take place.
Transformerless SMPS power supply for minimal heat and electromagnetic pollution
Traditional current transformers (transformers), which are widely used in water ionizers are only designed for a power supply with 100-150W / 24-30V / 5A resistance.
As a result, a lot of PCB bugs or malfunctions arise which can cause overheating of individual components. This occurs during the electrolysis process when an over current/charge happens.
The producer EOS, as a standard, have consistently set SMPS as a power supply, which can withstand a range of 200-500W outside / 24-35V / 10-20A.
It lowers the superheat rate of the device even with more than twice the output current in comparison to other devices, thereby increasing both the efficiency as well as the safety of the appliance by lowering the error rate program.
The SMPS power supply system gives the microprocessor controlled EOS Revelation II also hours of continuous operating without the unit overheating, the power dropping or electromagnetic pollution being made, as may be the case with antiquated power transformers.
Important note: It is highly recommended to use the SMPS transformer, since excess currents in an electrolytic vessel in areas of higher longitude increase (i.e. in the Americas, Europe, Southeast Asia, etc.) and so program bugs can be caused. This leads to devices from other manufacturers crashing and failing, which can be largely eliminated by switching the ionizer on and off. Sometimes the solution is sending the equipment to the dealer.