Hydrogen Water Pitcher HB08 with SPE and PEM Technology

Product Parameters

Hydrogen Water Pitcher | Hydrogen-water generator

Advantages of SPE and PEM

• Distilled water, purified water, Reverse Osmosis water are all acceptable.
• Produces pure hydrogen water without ozone and chlorine.
• High H2 concentration and ORP
• H2: 0.8 to 1.6ppm ORP: -450 to -650mv
• Separates hydrogen and oxygen
• Long working life

Product Diagram

Method of use

Fill pitcher with warm water, soak 10~30mins before first use so that the electrode can be activated for best working conditions.

1. Fill pitcher with drinkable water, cover with the cap.
2. Connect USB cable to power adapter and charge port located on the power supply base. Plug power adapter into wall.
3. Put the pitcher on the power supply base to start process. The buzzer will get a “DI~~” alarm and colorful indicator light will flash. Device has started working. Process will run for 1 hour with the first 15 minutes being a strong electrolysis mode which will produce high H2 concentrated water. The last 45 minutes is a weaker electrolysis which keep H2 in the water.
4. When the device not in use, unplug the adapter from the electric socket, or remove pitcher from power supply base

For many years it was irrefutable that activated water keeps its negative redox potential and therefore its electron abundance for just a few hours or days.
Yet when it was discovered that dissolved hydrogen is the deciding factor for the antioxidant effect was an industry developed that presses hydrogen under high pressure into multilayered water bags, where the positive qualities were able to be kept for some months. This creates big waste problems and is very expensive.

Hydrogen rich water was formerly only produced by stationary electric water ionizers. But one does also want to drink fresh activated water with dissolved molecular Hydrogen when on the go.

That is exactly what a Highdrogen® Age2 Go does.

It works with a PEM-cell that releases the excess oxygen through a tiny exhaust air hole. Result: Hydrogen Rich water

Technical description of the water cell: Proton-exchange cell (PEM) with Solid Polymer Membrane (SPE) from Nafion, made by Dupont, USA. So the membrane itself is not from Korea.

1. Fill the water without the inner lid to the rim, but leave the lid open so that the air gases expelled by the hydrogen can escape.
2. Press the action button once when the display is lit to activate the 3-minute phase (operating mode 1).
3. After the announcement: “Generating hydrogen water completed”, screw the lid tightly shut.
4. Press the action button twice while the display is lit to activate the 5-minute phase (operating mode 2). As the gas bubble above the water now contains almost pure H2 , more hydrogen in the water dissolves itself.

From the ORP to measuring dissolved hydrogen in activated water

Previously only the ORP was measured, to determine the antioxidant effect of activated water.

Yet this is very inaccurate and a relative value, because the ORP is influenced not only by the dissolved hydrogen, but also from the different ORPs of the different materials dissolved in the water, e.g. minerals.

After the role of hydrogen was recognised as being important, Japan produced the first pseudo-measuring-device on the market. The Trustlex ENH 1000, which wanted to differentiate a content of dissolved hydrogen with the measured ORP over an experience based conversion factor of ca. (-)2,14.
This factor was severely criticised by experts in Japan and the U.S. and Trustlex has admitted that the device does not work properly.