Regulating & shut-off valve 1/4″ inch, quick fitting

Q: How do the quick-fitting connectors for the pressure hoses of water ionizers and reverse osmosis systems work?

[bs_row class="row"][bs_col class="col-md-6"] Procedure for installing the quick-fitting connectors: Establishing the connection of the Ø 6,35 mm (1/4'') system Cut the pipe squarely and without burrs and ensure that the pipe has no sharp edges, longitudinal grooves or other damage. Insert the pipe into the quick fitting as far as it will go. The holding element fixes the pipe in the connector. The O-ring creates a permanently tight connection. [/bs_col][bs_col class="col-md-6"] Check the connection by counter-tightening Check that the pipe is inserted securely. This is easily possible by counter-pulling. Disconnecting the Ø 6,35 mm (1/4'') system Check that the system is depressurized. The pipe can then be loosened or removed by pushing back the holding element. [/bs_col][/bs_row] [bs_row class="row"][bs_col class="col-md-6"] [/bs_col][bs_col class="col-md-6"] [/bs_col][/bs_row]

5,00 €

including 19% VAT excl. Shipping Rate

Color: white, stainless steel regulating valve
To regulate the flow in particularly fine steps
Can also be used as a shut-off valve
Ideal before connecting water ionizersto regulate the flow to around 1,5-2 liters/minute, higher flows are also possible
Outer diameter: 1/4″ (6,35 mm), take a 6mm drill and enlarge the hole with the same drill so that the hose fits through exactly
Suitable for fluid and air applications
Particularly quiet in contrast to other manufacturers

Available

Any Questions?

Description
Reviews 0

Regulating valve and shut-off valve 1/4″ inch (6,35 mm) quick fitting (pressure-tight connectors)

With this shut-off valve you can easily stop or shut off the water to your device or reduce the flow.

It is suitable for a PE hose with a diameter of 1/4″ (inch).

Pressure ranges using the working temperature: 15 bar at 20°C, 8 bar at 65°C
Quick fitting for easy attachment and detachment.
NSF-61 certified

How do the quick-fitting connectors for the pressure hoses of water ionizers and reverse osmosis systems work?

published by Yasin Akgun

Procedure for installing the quick-fitting connectors:

Connecting the Ø 6,35 mm (1/4”) system

Cut the pipe squarely and without burrs and ensure that the pipe has no sharp edges, longitudinal grooves or other damage. Insert the pipe into the quick fitting as far as it will go. The holding element fixes the pipe in the connector. The O-ring creates a permanently tight connection.