AquaVolta® H2 Inspirator 300 or 600 H2 generator | for inhalation of hydrogen gas (H2) &, if desired, oxygen gas (O2)
Description AquaVolta® H2 Inspirator 300 hydrogen generator
These two hydrogen generators are newly designed and reflect the latest state of the art. Both use the latest technology from DuPont, which represents a significant advance in efficiency and promises longer system durability.
The MEA-PEM (proton exchange membrane) is currently the best version of the proton exchange membrane. This Micro Electrode Array (MEA-SPE) technology is smaller and yet more powerful than its predecessor SPE-PEM. Because the membranes are arranged in such a way that they are more powerful and efficient. You get the purest 99,999% quality of molecular hydrogen (just like the previous SPE H2 models).
Because of MEA's ability to produce more hydrogen using far less energy, you can expect your hydrogen machine to last longer and produce more H2.
DuPont's original breakthrough was SPE/PEM (solid polymer electrolyte/proton exchange membranes). SPE/PEM guaranteed the purity of hydrogen production, while previous hydrogen production methods were nowhere near as pure and healthy.
MEA-SPE technology uses a series of proton exchange membranes stacked to achieve the best results.
Aquavolta® H2 Inspirator 300: 2 x 150 ml/min H2 gas & 150 ml/min O2 gas production
Aquavolta® H2 Inspirator 300: 2 x 150 ml/min H2 gas & 150 ml/min O2 gas production
The SPE/PEM electrodes on older generators were made of pure titanium. However, this latest DuPont technology (MEA) used the highest quality platinum-coated titanium electrodes from Japan. The H2 flow is up to 300 ml/min.
The AquaVolta® H2 Inspirator is both a hydrogen gas machine and an H2 water infuser. To make hydrogen water, simply let the hose bubble into a bottle of water for a few minutes or use the AquaVolta® Hydrogen Infuser, sold separately.
Attention: Use only laboratory water and do not allow the membrane to dry out
For hydrogen machines, the type of water must be zero TDS-PPM. For this reason you can only double distilled water use. After about 4 to 8 weeks of use, the TDS content in the tank will increase. You should replace the bidest water when the mineral content reaches a maximum of 15 PPM. The device will show an increased TDS level. In this case, the remaining water is drained from the drain valve at the back and completely new water is filled in.
Inhale hydrogen (H2)? Aquavolta® H2 Inspirator with up to 2 x 300 ml/min H2 production
Please do not use self-produced distilled water or reverse osmosis water. The purer the water you use and the more often you change it, the longer you will have fun with your H2 generator. And if all else fails, the heart, the electrolysis cell, can be renewed by us. But usually this is not necessary. Maybe after 5 years of regular use...
Frank Humberg -
Clear purchase recommendation. Very good device, easy to use. After 30 minutes you feel very awake and very fresh.