Which water ionizers can be installed both on the tap and permanently on the cold water pipe?
There are now many water ionizers that, in addition to the typical non-user-friendly faucet installation, can also be permanently installed on the cold water pipe (typically after the angle valve, see picture above). The Kangen Enagic Despite its high price, for example, it is not one of them.
Below you will find an overview and links to these selected water ionizers for producing alkaline water:
All Allsbon Dion ionizers (Dion family, Dion Special), all Aquion or Alkamedi ionizers, the Nexus X Blue or the successor, who AquaVolta® Cavendish 9 (highly recommended), Ion source Alphion, EOS Genesis (formerly Platinion X-Cell Ultra), EOS Touch and the Sanuslife ECAIA (formerly Alkabest) water ionizer.
<!--
Installing Cavendish 9 water ionizer on the faucet
<!--
One-time adjustment of the flow to the water to be ionized
Here is a short email from one of our customers who has permanently installed his water ionizer on the cold water pipe:
“Hello Mr. Akgün,
I did a permanent installation yesterday with a T-piece. It was done in 30 minutes. Previously I didn't trust the connection to the plastic hose, but it's firmly in place.
Kind regards, Andreas N.”
Below is an email from a customer who installed the faucet:
“Hello Mr. Akgün,
I connected the device today. This even worked with two left hands and ten thumbs 😉
I tried it out straight away and am totally impressed. The water tastes so good.
Thank you again and best regards
Luise S.”